Ben Van Herbruggen,Bart Jooris,Jen Rossey,Matteo Ridolfi,Nicola Macoir,Quinten Van den Brande,Sam Lemey,Eli De Poorter
Abstract:Ultra-wideband (UWB) localization is one of the most promising approaches for indoor localization due to its accurate positioning capabilities, immunity against multipath fading, and excellent resilience against narrowband interference. However, UWB researchers are currently limited by the small amount of feasible open source hardware that is publicly available. We developed a new open source hardware platform, Wi-PoS, for precise UWB localization based on Decawave’s DW1000 UWB transceiver with several unique features: support of both long-range sub-GHz and 2.4 GHz back-end communication between nodes, flexible interfacing with external UWB antennas, and an easy implementation of the MAC layer with the Time-Annotated Instruction Set Computer (TAISC) framework. Both hardware and software are open source and all parameters of the UWB ranging can be adjusted, calibrated, and analyzed. This paper explains the main specifications of the hardware platform, illustrates design decisions, and evaluates the performance of the board in terms of range, accuracy, and energy consumption. The accuracy of the ranging system was below 10 cm in an indoor lab environment at distances up to 5 m, and accuracy smaller than 5 cm was obtained at 50 and 75 m in an outdoor environment. A theoretical model was derived for predicting the path loss and the influence of the most important ground reflection. At the same time, the average energy consumption of the hardware was very low with only 81 mA for a tag node and 63 mA for the active anchor nodes, permitting the system to run for several days on a mobile battery pack and allowing easy and fast deployment on sites without an accessible power supply or backbone network. The UWB hardware platform demonstrated flexibility, easy installation, and low power consumption.
engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is the lack of open - source hardware in the current Ultra - Wideband (UWB) positioning systems in research and applications. Specifically, the paper points out that although UWB technology has become one of the most promising technologies for indoor positioning due to its high - precision positioning capabilities, immunity to multipath fading, and robustness to narrow - band interference, one of the main challenges faced by researchers in developing UWB positioning systems is the lack of high - performance and cost - effective open - source hardware. This limits the researchers' ability to build flexible and modular test environments.
To overcome this challenge, the author has developed a new open - source hardware platform - Wi - PoS for accurate UWB positioning. This platform has the following unique features:
1. **Support for external UWB antennas**: It provides a flexible interface with external UWB antennas, allowing the antenna system to be optimized for specific uses.
2. **Support for multiple wireless technologies**: It supports three complementary wireless technologies: UWB, 2.4 GHz, and sub - GHz. Among them, UWB is used for high - precision positioning, and sub - GHz is used for long - distance communication and MAC - layer synchronization.
3. **Excellent pulse characteristics**: It ensures excellent pulse performance by minimizing pulse distortion. During the design, multiple measures are taken, such as using a full - wave simulator for RF design to ensure good impedance matching, selecting high - quality PCB materials and components, and reducing electromagnetic interference through via stitching.
4. **Compatibility with existing protocol stacks**: It is compatible with Contiki OS and openWSN, supports the existing IPv6 IoT protocol stack, and at the same time provides the Time - Annotated Instruction Set Computer (TAISC) framework, which is convenient for implementing network stacks and studying different MAC designs.
5. **Flexible node configuration**: The hardware device can be configured as an anchor node or a tag node to build a complete positioning system.
The paper also evaluates in detail the performance of the Wi - PoS hardware platform, including aspects such as range, accuracy, and power consumption. The experimental results show that in an indoor laboratory environment, the accuracy of the positioning system is less than 10 cm within a range of 5 m; in an outdoor environment, accuracies of less than 5 cm are achieved at distances of 50 m and 75 m respectively. In addition, the average power consumption of the hardware platform is very low, with only 81 mA for the tag node and 63 mA for the active anchor node, enabling the system to run on a mobile battery pack for several days, which is suitable for scenarios without power supply or backbone network.
In conclusion, this paper aims to solve the hardware limitations in current UWB positioning research by developing a low - cost, open - source, and powerful UWB hardware platform, and promote the further development and application of UWB technology in the indoor positioning field.