Abstract:There are various strategies being considered to reduce fuel consumption and emissions from the transportation sector. From the transportation operations perspective, one strategy that has gained interest worldwide is eco-driving. Eco-driving typically consists of changing a person's driving behavior based on providing general advice to the driver, such as accelerating slowly, driving smoothly, and reducing high speeds. More advanced dynamic eco-driving provides real-time advice to drivers based on changing traffic and infrastructure conditions for even greater fuel and emission savings. The concept of dynamic eco-driving takes advantage of real-time traffic sensing and infrastructure information, which can then be communicated to a vehicle with a goal of reducing fuel consumption and emissions. This article considers dynamic eco-driving in an arterial corridor with traffic control signals, where signal phase and timing (SPaT) information of traffic lights is provided to the vehicle as it drives down the corridor. The vehicle can then adjust its velocity while traveling through the corridor with the goal of minimizing fuel consumption and emissions. A dynamic eco-driving velocity planning methodology has been developed and is described herein. This algorithm has then been extensively tested in simulation, showing individual vehicle fuel consumption and CO2 reductions of around 10–15%, depending on corridor parameters including traffic volume, traffic speed, and other factors. This 10–15% improvement is realized directly by the vehicle that is equipped with this dynamic eco-driving technology and can be accomplished with very little time loss. We have also carried out an extensive analysis of the entire traffic stream under different traffic volumes and different penetration rates of the dynamic eco-driving technology. It is found that there are also significant indirect network-wide energy and emissions benefits on the overall traffic, even at low penetration rates of the technology-equipped vehicles. Based on the simulation results, the maximum fuel saving and emission reduction occur during medium traffic volumes (corresponding to traffic volume of 300 vehicles/hr/link) and with low penetration rates (5%, 10%, and 20%). Under these conditions, the total traffic energy/emissions savings typically triple what is saved from the technology-equipped vehicles alone (e.g., total 4% savings compared to 1.3% savings). This is due primarily to the eco-driving velocity planning affecting nonequipped vehicles that follow behind.

Dynamic Cooperative Speed Optimization at Signalized Arterials with Various Platoons

A Safety-Enhanced Eco-Driving Strategy for Connected and Autonomous Vehicles: A Hierarchical and Distributed Framework

Cooperative Method of Traffic Signal Optimization and Speed Control of Connected Vehicles at Isolated Intersections

Eco-Driving at Signalized Intersections: A Multiple Signal Optimization Approach

Cooperative Autonomous Vehicle Speed Optimization near Signalized Intersections

Eco-Driving Operation of Connected Vehicle With V2I Communication Among Multiple Signalized Intersections

An Eco-Driving Strategy at Multiple Fixed-Time Signalized Intersections Considering Traffic Flow Effects

Double-layer speed optimization for reducing fuel consumption with vehicle-to-infrastructure communication

An eco-driving algorithm based on vehicle to infrastructure (V2I) communications for signalized intersections

Platoon-Based Speed Control Algorithm for Ecodriving at Signalized Intersection

A Real-Time Optimal Eco-driving for Autonomous Vehicles Crossing Multiple Signalized Intersections

Dynamic Eco-Driving for Signalized Arterial Corridors and Its Indirect Network-Wide Energy/Emissions Benefits

Eco-driving-based mixed vehicular platoon control model for successive signalized intersections

Receding Horizon Optimization for Cooperation of Connected Vehicles at Signal-Free Intersections under Mixed-Automated Traffic

V2i Based Cooperation Between Traffic Signal And Approaching Automated Vehicles

Optimal Eco-driving Control of Intelligent and Connected Vehicles Through Multiple Signalized Intersections

Distributed Dynamic Platoons Control and Junction Crossing Optimization for Mixed Traffic Flow in Smart Cities- Part II. Stability, Optimization, and Performance Analysis

A dynamic optimization method for adaptive signal control in a connected vehicle environment

Dynamic Network-Level Traffic Speed and Signal Control in Connected Vehicle Environment

A driving guidance strategy with pre-stop line at signalized intersection: Collaborative optimization of capacity and fuel consumption

Eco-Driving of Autonomous Vehicles for Nonstop Crossing of Signalized Intersections