Abstract:The strain after rolling plays an important role in the prediction of the microstructure and properties and plate deformation permeability. So, it is necessary to establish a more accurate theoretical strain model for the rolling process. This paper studies the modeling method of the equivalent strain based on the upper bound principle and the stream function method. The rolling deformation region is divided into three zones (inlet rigid zone, plastic zone, and outlet rigid zone) according to the kinematics. The boundary conditions of adjacent deformation zones are modified according to the characteristics of each deformation zone. A near-real kinematics admissible velocity field is established by the stream function method on this basis. The geometric boundary conditions of the deformation region are obtained. The deformation power, friction power, and velocity discontinuous power are calculated according to the redefined geometric boundary conditions. On this basis, the generalized shear strain rate intensity is calculated according to the minimum energy principle. Finally, the equivalent strain model after rolling is obtained by integrating the generalized shear strain rate in time. The plate rolling experiments of AA1060 and the numerical simulations are carried out with different rolling reductions to verify the analytic model precision of the equivalent strain. The results show that the minimum and the maximum relative equivalent strain deviation between the analytic model and the experiment is 0.52% and 9.96%, respectively. The numerical calculation and experimental results show that the model can accurately calculate the strain along the plate thickness. This model can provide an important reference for the rolling process setup and the microstructure and properties prediction.

The influence of neutral layer offset on the straightening force in the process of bimetal composite plate straightening

An Analytical Solution of Three-Dimensional Steady Thermodynamic Analysis for a Piezoelectric Laminated Plate Using Refined Plate Theory

Analysis and Simulation of Machining Deformation Resulting from Residual Stress

[Systemic treatment of psoriasis by fumaric acid derivatives].

Calculation method and analysis of residual stress in the strip bending roller straightening process

Modeling of 3D Plastic Anisotropy and Asymmetry of Extruded Magnesium Alloy and Its Applications in Three-Point Bending

Effects of Surface and Initial Stresses on the Bending Stiffness of Trilayer Plates and Nanofilms

Numerical simulation of influence factors of stress distribution of weld-bonded joint under peeling load

Effects of Strength Difference and Intermediate Principal Stress on Plane Strain Elastic–plastic Bending of a Curved Beam

Bending of Magnetostrictive Laminated Plates

Analytical model of the stress–strain state of multilayer composite plates under the influence of different load types with asymmetrical boundary conditions

Spring-Back Prediction of the Bi-Layered Metallic Tube under CNC Bending Considering Neutral Layer Shifting Extraction

ELASTIC BENDING AND STABILITY OF STEEL-CONCRETE COMPOSITE PLATE

The Mechanism of Deformation Compatibility of TA2/Q345 Laminated Metal in Dynamic Testing with Split-Hopkinson Pressure Bar

Investigation on the bending deformation of laser peen forming with a simplified eigenstrain-based finite element model

A homogenized bending theory for prestrained plates

Crack mechanism and experimental verification on straightening of AZ31B magnesium alloy plate

Influence of Initial Structural Dimensions of Plates on Welding Distortion

Effect of Stretch-Bending Straightening on the Residual Stress of C19400 Alloy Strips

The central strain analytical modeling and analysis for the plate rolling process

Study on deformation behaviour of TA2/Q345R composite plate during heat treatment process