Abstract:This work investigates a new concept to finely resolve the vertical structure of natural media, such as snow, ice, and vegetation, by using a formation of spaceborne synthetic aperture radars (SARs) mounted onboard different satellites. The formation is assumed to operate in multiple-input–multiple-output (MIMO) mode by implementing a frequency-division multiplexing (FDM) access scheme, where all satellites transmit simultaneously on different frequency bands and receive the echoes scattered by the Earth's surface in all transmitted bands. In doing so, a formation on satellites is used to produce SAR images. By the principle of diffraction tomography, each of these images represents a distinct set of wavenumbers, i.e., a distinct region of the spatial spectrum of the observed scene. The vertical separation between any two sets of wavenumbers defines the interferometric differential wavenumber, which determines the sensitivity of that particular pair to the vertical structure of the observed scene. Fine vertical resolution is achieved by developing a novel approach to set the satellite positions in such a way that the resulting interferometric differential wavenumbers form an almost uniformly spaced array of maximum length under the constraint of a given height of ambiguity and interferometric coherence magnitude. As a result, we show two examples where formations of four or five satellites are deployed to provide the equivalent of 17 and 26 monostatic acquisitions, respectively. Such figures are comparable to the best airborne and ground-based systems available as of today and indicate the concrete possibility to image the vertical structure of natural targets from space at fine resolution. The concept here developed to deploy the formation is referred to as minimum redundancy wavenumber illumination (MRWI), as it is shown to be a generalization to distributed targets of the principle of minimum redundancy virtual array (MRVA) used in array theory. The analysis is supported by results from synthetic data generated by numerical simulations.

Spaceborne Demonstration of Distributed SAR Imaging With TerraSAR-X and TanDEM-X

Spaceborne Staring Spotlight SAR Tomography - A First Demonstration with TerraSAR-X

Fast Target Perception Imaging of Spaceborne SAR in Sparse Field

A Review Of Ten-Year Advances Of Multi-Baseline Sar Interferometry Using Terrasar-X Data

Non-Local SAR Tomography for Large-Scale Urban Mapping

Spaceborne TomoSAR and Beyond: from SAR Image Stacks to Objects

Large-Scale Urban Mapping using Small Stack Multi-baseline TanDEM-X Interferograms

Extension of 4-D SAR Imaging to the Monitoring of Thermally Dilating Scatterers

High Quality Large-Scale 3-D Urban Mapping with Multi-Master TomoSAR

A New Conception of Multi-Stage DBF Based Spaceborne High-Resolution Wide-Swath SAR System

Operational TomoSAR Processing Using TerraSAR-X High Resolution Spotlight Stacks from Multiple View Angles

High-Resolution and Wide-Swath 3D Imaging for Urban Areas Based on Distributed Spaceborne SAR

Experimental Demonstration of Ambiguous Staggered SAR With Waveform Alternation for Coastal Surveillance

SAR Tomography at the Limit: Building Height Reconstruction Using Only 3-5 TanDEM-X Bistatic Interferograms

Long-Range Backscatter Connectivity via Spaceborne Synthetic Aperture Radar

Generation of Large-Scale High Quality 3-D Urban Models

Conceptual Study and Performance Analysis of Tandem Multi-Antenna Spaceborne SAR Interferometry

FDM MIMO Spaceborne SAR Tomography by Minimum Redundancy Wavenumber Illumination

Reconstruction and Evaluation of DEMs From Bistatic Tandem-X SAR in Mountainous and Coastal Areas of China

An Efficient Tomographic Inversion Approach for Urban Mapping Using Meter Resolution SAR Image Stacks

Advanced Coherence Stacking Technique Using High Resolution TerraSAR-X Spotlight Data