Abstract:In the traditional calculation model of mesh stiffness, the tooth root crack is commonly assumed to be in a closed state. However, the gear tooth crack will open under the action of mesh force in the meshing process, the mesh stiffness of the cracked tooth and the dynamic response of gear system is thus different from the closed crack case. There almost no studies have been done to investigate the influence of tooth crack open state on mesh stiffness and dynamic response. Thus, this paper presents an improved mesh stiffness calculation model of the cracked gear, in which the effective compression section and the neutral layer of the cracked tooth are re-evaluated considering the crack opening state. Then, the accuracy of the proposed model is verified by the finite element method (FEM), and the differences of mesh stiffness and statistical indicators of the dynamic response between the proposed and traditional models are further studied. The mesh stiffness calculation results show that the proposed model achieves a higher accuracy than the traditional model. And its precision gradually increases as the crack grows, which can be improved by 2.35% in the case of large crack (48.38% crack) when compared to the traditional model. The fault response signal obtained from the traditional model yields a larger amplitude than the actual situation, which will lead to errors of the statistical indicators used for fault diagnosis, in particular, the RMS value can be up to an average percentage difference of 11.98% under the large crack (48.38% crack). It is concluded that the proposed model has a higher accuracy for calculating the mesh stiffness of the cracked gear and can be further used to serve the fault diagnosis and detection of the gear system.

Vibration analysis for tooth crack detection in a spur gear system with clearance nonlinearity

Vibration characteristic analysis of spur gear systems under tooth crack or fracture

Nonlinear dynamic modeling and analysis of a helicopter planetary gear set for tooth crack diagnosis

Research on the time-varying mesh stiffness method and dynamic analysis of cracked spur gear system considering the crack position

Investigation of tooth crack opening state on time varying meshing stiffness and dynamic response of spur gear pair

Nonlinear dynamics of a spur gear pair with tooth root crack based on an amplitude modulation function

Mesh stiffness calculation and vibration analysis of the spur gear pair with tooth crack, considering the misalignment between the base and root circles

Detecting the 3D Spatial Varying Crack Evolution-Induced Vibration of Gearbox Through a System Level Rigid-Flexible Coupling Model

Effects Of Tooth-Crack-Induced Mesh Stiffness On Fault Signals Of A Planetary Gear Train

Dynamics Analysis of the Gear System with Tooth Breakage Fault

Dynamic modeling and analysis of multistage planetary gear system considering tooth crack fault

Time-varying Mesh Stiffness Algorithm Correction and Tooth Crack Dynamic Modeling

Dynanic Simulation of Helical Gears with Crack Propagating in to Gear Body

Nonlinear Dynamic Characteristics of Wind Turbine Gear System Caused by Tooth Crack Fault

An improved time-varying mesh stiffness algorithm and dynamic modeling of gear-rotor system with tooth root crack

Improved Mesh Stiffness Method and Vibration Analysis of a Planetary Gear System with a Spatial Tooth Crack

Resultant Vibration Signal Model Based Fault Diagnosis of a Single Stage Planetary Gear Train with an Incipient Tooth Crack on the Sun Gear

Contribution of friction-induced vibration to the realistic failure analysis of spur gear cracked teeth

Mesh stiffness modelling and dynamic simulation of helical gears with tooth crack propagation

Dynamic modeling and analysis of the internal gear transmission with tooth crack subjected to the heavy torque

Dynamic modeling and analysis of planetary gear system for tooth fault diagnosis