Abstract:To predict brittle fracture in high-strength steels, this study introduces a methodology for analyzing hydrogen-assisted degradation. The proposed approach considers the fully coupled problems of deformation-hydrogen diffusion and cohesive zone modeling. The analysis of hydrogen diffusion assumes that trapped and lattice hydrogen remain in a equilibrium state while accounting for the relationships between the increase in trap sites and plastic strain. The diffusion model simulates hydrogen diffusion in the small scale yielding (SSY) configuration at a crack tip. The simulation results reveal that hydrogen diffusion follows the hydrostatic stress distribution around the crack tip region. Additionally, the plastic strain near this area leads to an increased number of trap sites. Notably, the simulations indicate that lattice hydrogen is the dominant source of embrittlement when a sufficient amount of hydrogen atoms dissolve into the steel, as compared to trapped hydrogen. The hydrogen-assisted degradation evolution is studied by investigating the influence of hydrogen in a cohesive zone modeling (CZM) with a trapezoidal traction separation law (TSL), based on Hydrogen-Enhanced DEcohesion (HEDE) framework. The fully computational framework is utilized to simulate the hydrogen-charged fracture toughness test in a (CT) specimen made of 30CrMo high strength steel. It is demonstrated that the load bearing capacity of the specimen decreases with an increase in the initial hydrogen concentration. Furthermore, the study examines the evolution of the initial crack time with varying initial hydrogen concentrations. The initial hydrogen concentrations are estimated to match the maximum loads observed in the experimental load-displacement curves based on computational framework. The computational CTOD-R curves for hydrogen generally follow the experimental data, the marginally elevated computational CTOD values to underestimate the embrittling in hydrogen-contaminated steel. Overall, the present study proves the capability of this numerical technique to reproduce experimental findings related to hydrogen-assisted fracture.

Molecular‐Scale Modeling and Multiscale Experiments on the Elastic Properties of HR‐2 Steel Affected by Hydrogen

Effect of Hydrogen Content on the Microstructure, Mechanical Properties, and Fracture Mechanism of Low-Carbon Lath Martensite Steel

Multi-scale hydrogen embrittlement prediction model of low alloy steel based on multi-dimensional defect reconstruction

Modelling of Hydrogen Distribution at the Fatigue Crack Tip of Austenitic Stainless Steels in Internal and External Hydrogen Tests

Fracture Strain Model for Hydrogen Embrittlement Based on Hydrogen Enhanced Localized Plasticity Mechanism

Analysis of Hydrogen Distribution and Diffusion in Pre-Strained SUS316L through Scanning Kelvin Probe Force Microscopy and Thermal Desorption Spectroscopy

Molecular Dynamics Study of the Microscopic Mechanism of Hydrogen Embrittlement Damage in FeCr Alloys

Numerical analysis of the fully-coupled continuum cohesive modeling on the hydrogen-assisted degradation behavior in high-strength steel

Modelling Hydrogen Induced Stress Corrosion Cracking in Austenitic Stainless Steel

Modeling of Hydrogen-Charged Notched Tensile Tests of an X70 Pipeline Steel with a Hydrogen-Informed Gurson Model

Hydrogen embrittlement of low carbon structural steel at macro-, micro- and nano-levels

Modelling of hydrogen diffusion leading to embrittlement in austenitic stainless steels

Modelling of room temperature outgassing and diffusion in a martensitic advanced high-strength steel

Hydrogen Effect on the Deformation Evolution Process in Situ Detected by Nanoindentation Continuous Stiffness Measurement

Influence of hydrogen behaviors on tensile properties of equiatomic FeCrNiMnCo high-entropy alloy

Interrelationship between hydrogen and α′-martensite of SUS 304 austenitic stainless steel revealed by tensile tests

Multi-scale Simulation of Hydrogen Influenced Critical Stress Intensity in High Co–Ni Secondary Hardening Steel

Experimental study on slow tensile, fatigue, and impact on X42 steel and #20 carburizing steel

Effect of Strain-Induced Martensite on Hydrogen Embrittlement of Austenitic Stainless Steels Investigated by Combined Tension and Hydrogen Release Methods

Hydrogen Effect On The Deformation Behavior Of Austenitic Stainless Steels Investigated By Nanoindentation

Predictive Environmental Hydrogen Embrittlement on Fracture Toughness of Commercial Ferritic Steels with Hydrogen-Modified Fracture Strain Model