Abstract:Treatment of Camellia oleifera shell and preparation of composites. The preparation of wood‐plastic composites (WPCs) with high filling fibers and excellent physical properties remained a great challenge. This study used Camellia oleifera shell (COS, agroforestry product waste) as raw material, and prepared 60 wt% COS/high‐density polyethylene (HDPE) WPCs using profile extrusion method through pretreating fibers including hot water, hot steam, alkali, acid, extraction, and fine fiber screening. After pretreatments, the relative contents of cellulose and lignin increased, the relative contents of hemicellulose and extract decreased significantly, and the length‐diameter ratio was improved. The flexural strength, tensile strength and impact strength of hot water and steam heat treated composites reached 31.4, 17.1 MPa and 6.9 kJ/m2, 31.8, 16.8 MPa and 6.7 kJ/m2, respectively. Compared with untreated 28.8, 14.7 MPa and 5.5 kJ/m2, the advantages were more obvious. Alkali treatment and acid treatment improved the thermal stability and residue rate of the material. Extraction treatment and alkali treatment significantly reduced the processing torque force, which was conducive to processing, while acid treatment was the opposite. The highest water absorption and thickness expansion rate were 13.75% and 3.60% respectively at 7 days after alkali treatment, which were considerably higher than 5.60% and 0.78% without treatment, while other pretreatments improved the dimensional stability of the material. Highlights High filling Camellia oleifera shell waste/HDPE composites were prepared. Physical and chemical pretreatments improved interfacial adhesion of the composites. Heat treatments significantly improved mechanical performance of the composites.

Thermal Characteristics and Kinetics of Waste Camellia oleifera Shells by TG–GC/MS

Thermogravimetric Characteristics and Evaluation of Products During Pyrolysis of Camellia Oleifera Seed Residues

Co-pyrolysis characteristics of camellia oleifera shell and coal in a TGA and a fixed-bed reactor

ZSM–5@KIT–6 encapsulated composite molecular sieves for the catalytic cracking of waste cooking oil model compound to produce light olefins

Properties, kinetics and pyrolysis products distribution of oxidative torrefied camellia shell in different oxygen concentration

Co-combustion of Coal and Carbonaceous Wastes: Thermogravimetric Analysis

Investigation of Catalytic Co-Pyrolysis Characteristics and Synergistic Effect of Oily Sludge and Walnut Shell

TGA Pyrolysis and Gasification of Combustible Municipal Solid Waste

Catalytic co-pyrolysis behaviors, product characteristics and kinetics of rural solid waste and chlorella vulgaris

Thermal analysis technology to utilize waste biomass and waste heat to produce high-quality combustible gas through simulations and experiments

Kinetics, Thermodynamics, and Volatile Products of Camphorwood Pyrolysis in Inert Atmosphere

Assessment of the thermal pyrolysis characteristics and kinetic parameters of spent coffee waste: a TGA-MS study

Characteristics, kinetics, infrared analysis and process optimization of co-pyrolysis of waste tires and oily sludge

Torrefaction performance of camellia shell under pyrolysis gas atmosphere

Valorization of Camellia oleifera oil processing byproducts to value-added chemicals and biobased materials: A critical review

Combustion characteristics and kinetic analysis of finished leather waste using TG-DSC and transformation behavior of Cr during its combustion

Pyrolytic behavior of waste corn cob.

Microwave-Assisted Camellia oleifera Abel Shell Biochar Catalyzed Fast Pyrolysis of Waste Vegetable Oil to Produce Aromatic-Rich Bio-Oil

Preparation of waste Camellia oleifera shell and high‐density polyethylene composites: Effect of pretreatment on fiber and materials properties

Investigation on the co-pyrolysis of municipal solid waste and sawdust: pyrolysis behaviors, kinetics, and thermodynamic analysis

Fast Catalytic Co-pyrolysis Characteristics and Kinetics of Chlorella Vulgaris and Municipal Solid Waste over Hierarchical ZSM-5 Zeolite