Abstract:As surface wear is one of the major failure mechanisms in many applications that include polymer gears, lifetime prediction of polymer gears often requires time-consuming and expensive experimental testing. This study introduces a contact mechanics model for the surface wear prediction of polymer gears. The developed model, which is based on an iterative numerical procedure, employs a boundary element method (BEM) in conjunction with Archard's wear equation to predict wear depth on contacting tooth surfaces. The wear coefficients, necessary for the model development, have been determined experimentally for Polyoxymethylene (POM) and Polyvinylidene fluoride (PVDF) polymer gear samples by employing an abrasive wear model by the VDI 2736 guidelines for polymer gear design. To fully describe the complex changes in contact topography as the gears wear, the prediction model employs Winkler's surface formulation used for the computation of the contact pressure distribution and Weber's model for the computation of wear-induced changes in stiffness components as well as the alterations in the load-sharing factors with corresponding effects on the normal load distribution. The developed contact mechanics model has been validated through experimental testing of steel/polymer engagements after an arbitrary number of load cycles. Based on the comparison of the simulated and experimental results, it can be concluded that the developed model can be used to predict the surface wear of polymer gears, therefore reducing the need to perform experimental testing. One of the major benefits of the developed model is the possibility of assessing and visualizing the numerous contact parameters that simultaneously affect the wear behavior, which can be used to determine the wear patterns of contacting tooth surfaces after a certain number of load cycles, i.e., different lifetime stages of polymer gears.

Durability and design parameters of a Steel/PEEK gear pair

An Experimental Investigation on the Wear of Lubricated Steel Against PEEK Gears

Durability Investigation of plastic gears

Experimental determination of plastic gear durability

Identification of failure modes of a PEEK-steel gear pair under lubrication

Influence of Metal Gear Tooth Geometry on Load and Wear within Metal-Polymer Gear Pairs

Fatigue and Wear Performance of Autoclave-Processed and Vacuum-Infused Carbon Fibre Reinforced Polymer Gears

Experimental Investigation of the Wear Behaviour of Coated Polymer Gears

Designing a Polymer Gear for Use in the Environment of an Internal Combustion Engine

The effect of gear-manufacturing quality on the mechanical and thermal responses of a polymer-gear pair

Experimental and numerical analysis of laminated carbon fibre-reinforced polymer gears with implicit model for coefficient-of-friction evaluation

Evaluation of Mechanical and Thermal Stresses in Polymer Gear Teeth through Simulation Approach

Investigation of the Durability and Performance of Gears Made of Glass Fiber, Carbon and Bronze-Reinforced Polytetrafluoroethylene Matrix Composite Material

An Analysis of Polymer Gear Wear in a Spur Gear Train Made Using FDM and FFF Methods Based on Tooth Surface Topography Assessment

Effect of the coefficient of friction on gear-tooth root fatigue for both dry and lubricated running polymer gears

A Contact Mechanics Model for Surface Wear Prediction of Parallel-Axis Polymer Gears

Influences of tooth flank finishing after fine particle shot peening on tooth surface texture and fatigue life of vacuum carbonitrided gears

A Computational Model for Analysing the Dry Rolling/Sliding Wear Behaviour of Polymer Gears Made of POM

Friction and wear performance of polyether ether ketone (PEEK) polymers in three lubrication regimes

Noise Evaluation of S-Polymer Gears

Computational Model for Analysing the Tooth Deflection of Polymer Gears