Abstract:To mitigate the shuttle effect of Li–S batteries, a hollow microflower Mo2C/MoO2 heterostructure is synthesized using a two‐step calcining method. The H‐Mo2C/MoO2/nitrogen‐doped carbon/S cathode with the high‐sulfur loading of 6.2 mg cm−2 and a low‐electrolyte/sulfur ratio of at 1C, where the cell exhibits an excellent cycling stability, maintains a capacity of 308 mAh g−1 after 500 cycles. Lithium–sulfur batteries (Li–S batteries) have a high theoretical capacity density. However, due to the solubility of long‐chain polysulfides migration between the positive and negative electrodes driven by concentration gradients, the cycle stability of lithium–sulfur batteries is compromised, hindering their practical application. To mitigate the shuttle effect and enhance the electrochemical performance of Li–S batteries, a hollow microflower (MF) Mo2C/MoO2 heterostructure is synthesized using a two‐step calcining method. The presence of a hetero‐interface improves the electrical conduction rate, facilitating more effective charge transfer at the interface between heterogeneous components. Additionally, the increased catalytic active sites enhance the conversion of polysulfides and promote the catalytic capability. As a result, Li–S batteries with H‐Mo2C/MoO2/nitrogen‐doped carbon MFs as additives in the cathode exhibit excellent rate performance and good cycling stability. After 100 cycles at 0.2C, the capacity remains at 1071.6 mAh g−1, with a capacity retention rate of 90.6%. Notably, the Li–S batteries demonstrate a capacity decay of only 0.011% per cycle over 1000 cycles at 1C, with a specific capacity of 790 mAh g−1 retained after the cycling process. In this work, a rational approach is provided to fabricating transition‐metal carbon‐oxide heterostructures with an optimized structure to enhance the performance of Li–S batteries.

Boosting High‐Rate Li–S Batteries by an MOF‐Derived Catalytic Electrode with a Layer‐by‐Layer Structure

A Freestanding Flexible Single‐Atom Cobalt‐Based Multifunctional Interlayer Toward Reversible and Durable Lithium‐Sulfur Batteries

Boosting the Rate Performance of Li-S Batteries Via Highly Dispersed Cobalt Nanoparticles Embedded into Nitrogen-Doped Hierarchical Porous Carbon

Synergistic Regulation of Polysulfides Conversion and Deposition by MOF‐Derived Hierarchically Ordered Carbonaceous Composite for High‐Energy Lithium–Sulfur Batteries

Sulfur film sandwiched between few-layered MoS2 electrocatalysts and conductive reduced graphene oxide as a robust cathode for advanced lithium–sulfur batteries

Boosting Polysulfide Catalytic Conversion and Facilitating Li+ Transportation by Ion‐Selective COFs Composite Nanowire for LiS Batteries

Synergistic Polysulfides Adsorption–Conversion with Mo2C–MoO2 Heterostructure for Kinetically Enhanced Lithium–Sulfur Battery

Synergizing Spatial Confinement and Dual‐Metal Catalysis to Boost Sulfur Kinetics in Lithium–Sulfur Batteries

Highly Dispersed Catalytic Co3S4 among a Hierarchical Carbon Nanostructure for High-Rate and Long-Life Lithium-Sulfur Batteries.

Enhanced Polysulfide Regulation <i>via</i> Porous Catalytic V<sub>2</sub>O<sub>3</sub>/V<sub>8</sub>C<sub>7</sub> Heterostructures Derived from Metal-Organic Frameworks toward High-Performance Li-S Batteries

Enhanced Electrochemical Kinetics with Highly Dispersed Conductive and Electrocatalytic Mediators for Lithium–Sulfur Batteries

MOFs-derived Porous Mo2C–C Nano-Octahedrons Enable High-Performance Lithium–sulfur Batteries

Ultra‐Dispersed α‐MoC 1−x Embedded in a Plum‐Like N‐Doped Carbon Framework as a Synergistic Adsorption–Electrocatalysis Interlayer for High‐Performance Li–S Batteries

Freestanding Agaric-Like Molybdenum Carbide/graphene/n-Doped Carbon Foam As Effective Polysulfide Anchor and Catalyst for High Performance Lithium Sulfur Batteries

Synergistic regulation of polysulfides immobilization and conversion by MOF-derived CoP-HNC nanocages for high-performance lithium-sulfur batteries

Ordered Mesoporous Carbon Grafted MXene Catalytic Heterostructure As Li-Ion Kinetic Pump Toward High-Efficient Sulfur/Sulfide Conversions for Li-S Battery

Dipolar and catalytic effects of an Fe<sub>3</sub>O<sub>4</sub> based nitrogen-doped hollow carbon sphere framework for high performance lithium sulfur batteries

Defect-Rich Multi-shelled Fe-doped Co3O4 Hollow Microspheres with Multiple Spatial Confinements to Facilitate Catalytic Conversion of Polysulfides for High-Performance Li-S Batteries.

Coordinated Adsorption and Catalytic Conversion of Polysulfides Enabled by Perovskite Bimetallic Hydroxide Nanocages for Lithium‐Sulfur Batteries

Controllable assembly of polysulfides mediator induced by host-guest chemistry for upgrading energy density and longevity of lithium-sulfur batteries

Engineering the Conductive Network of Metal Oxide‐Based Sulfur Cathode toward Efficient and Longevous Lithium–Sulfur Batteries