Abstract:Robotics can play a significant role to increase efficiency and lighten the farmer’s load. Despite challenges in the agricultural robotic designs, robots are capable of performing various tasks and changing themselves accordingly, based on specific conditions. To address modern problems in the agricultural field, an agricultural robot is one of the key technologies. Although agricultural robotic is still in the development stage, robots have a bright future ahead. This paper proposes a new 5DOF articulated robotic arm design that would become a solution for heavy crop harvestings like pumpkin and cabbage. After the development stage, this robotic arm will be mounted on a robot tractor for real experimentation. The main design process of this robotic arm was conceived using 6 stages of Shigley design process. All components were designed, assembled and analyzed by using Solidworks 2014 in compliance with Japanese Industrial Standards (JIS) standards. The parts of the system that had dynamic nature were analyzed manually using standard mechanical formulas. Calculations of the workspace required joint torque, and coordination of mass center position was done by using standard machine design methods. Denavit-Hartenberg method was used to calculate forward and inverse kinematics. To resolve the torque reduction, components were designed using different materials and mass centers and comparing their performance. Results showed that total torque in Joints number 1, 2, 3, 4 and 5 were 6.15, 257.35, 103.4, 20.2 and 0.1 respectively with a rotational speed range of 15 ~ 60 rpm. Changes in the linkage material and servo motor location improved 29.7% ~ 47.7% and 29.7% ~ 68.9% of the total required torque for each joint. The maximum distance covered by the arm was 1421 mm from the and 2026 mm from the attachment point. According to the feedback received

Integration of ROBO-analyzer for forward and inverse kine-mastics of 6 DOF robot to check flexible DH parameters.

Kinematic Analysis of A New Hybrid Surgical Robot

Inverse Kinematics Analysis and Simulation of a 5 DOF Robotic Arm using MATLAB

Inverse kinematics for a 7-DOF humanoid robotic arm with joint limit and end pose coupling

Simulation and kinematic analysis of KUKA KR5 Arc robot

Analysis of Numerical Method on Inverse Kinematics of Robotic Arm Welding with Artificial Intelligence

A Strong Real Time Algorithm For Inverse Kinematics Of 6r Robots

Inverse Kinematics of 6R Robots Based on the Orthogonal Character of Rotation Sub-matrix

Analytical Solution for Inverse Kinematics

Inverse Kinematic Problem of Movement of Six Degrees of Freedom Robotic Arm (Solved by a Numerical Method)

Complete Analytical Forward and Inverse Kinematics for the NAO Humanoid Robot

A Simulation Tool for Kinematics Analysis of a Serial Robot

Kinematics and Control for a Personal Robot with Five Degrees-of-freedom Arms

Complete analytical inverse kinematics for NAO

Inverse Kinematics Analysis of Humanoid Robot Arm by Fusing Denavit–Hartenberg and Screw Theory to Imitate Human Motion With Kinect

Kinematics Analysis and Simulation of A 5DOF Articulated Robotic Arm Applied to Heavy Products Harvesting

Modeling, Fabrication & Control of an Articulated Robotic Arm

Kinematics and workspace analysis of a robotic arm for medical delivery robots

Towards Extending Forward Kinematic Models on Hyper-Redundant Manipulator to Cooperative Bionic Arms

Kinematics analysis of trajectory planning of four-degree-of-freedom robotic arm