Modal utilization method for measuring the track axial force
Guodong Yue,Linlin Zhang,Bo Ren,Jing Dong,Dazhi Wang
DOI: https://doi.org/10.1007/s11071-023-08367-0
IF: 5.741
2023-04-06
Nonlinear Dynamics
Abstract:Measurement of thermal forces is an important process that aids in reducing the maintenance cost of continuous welded rails (CWRs). But it is still a very challenging problem. Axial force can be measured through vibration modal changes, and vibration measurement methods have several merits compared to conventional measurement methods using piles, strain sensors, magnetoelastic and acoustoelastic effect sensors, and X-rays. Vibration measurement methods have the ability to measure the absolute thermal force in a local interval and are robust against abrasion, surface residual stress, and material grains. However, they are affected by both axial force and track parameters, thereby restricting their engineering applications. To address these limitations, this study proposes a novel method called 'modal utilization method of periodic structure' (MUMPS). Its novelty lies in proving that variations in frequency constitute a random sequence satisfying the constraints of Chebyshev's law of large numbers. It can determine the influence of track parameters on the vibration modes by averaging across different eigenfrequencies without investigating what they correspond to respectively. First, MUMPS is introduced through a hypothesis that the mean value of the natural frequency variations caused by the track parameter variations approaches a stable value. Second, MUMPS is validated using finite element simulation results, which show that the probability density function of the measurement error of the neutral temperature obey N (0.5,2.6). Finally, the accuracy of MUMPS is investigated through experiments, the results are compared with the strain-gauge method results, and they show good agreement. The experimental results show that as the number of the eigenfrequencies reaches 12, the mean value becomes stable, and the measurement error of neutral temperature is less than 4 . Engineering applicability of MUMPS is demonstrated by conducting real-time measurements on railway tracks. The results show that the proposed method is simple, as sophisticated instruments are not employed to determine the axial forces on railway tracks.
engineering, mechanical,mechanics