Abstract:In the present work, the composite cross-linked were used to consolidate the dyed paper manuscripts. Nanocomposites of mesoporous silica nanoparticle (MPSNP)/polyvinyl alcohol (PVA) and cellulose nanofiber (CNF)/PVA, which have never been used before, have been evaluated for the consolidation process of the dyed paper manuscripts with madder extract. Three concentrations 1%, 3%, and 5% have been prepared. Analysis and investigation methods like scanning electron microscope (SEM), transmission electron microscope (TEM), dynamic light scattering analysis (DLS), X-Ray diffraction Analysis (XRD), atomic force microscope (AFM), Fourier transform infrared spectroscopy (FTIR) and total color difference (ΔE) by spectrophotometer have been used in order to characterize the prepared nano-sized composites and evaluate the treated dyed paper samples before and after the aging process. The results of surface morphology by SEM revealed the effectiveness of MPSNP/PVA core-shell nanocomposite at 5% in the consolidation process, where the improvement of properties of the aged dyed paper samples. The fibers of the treated paper became strong and appeared clearly. The result of ΔE measurements showed that the treated sample with MPSNP/PVA nanocomposite at 5% gave the lowest ΔE (5.22), while, the treated sample with CNF/PVA nanocomposite at 5% gave the highest ΔE value (11.66). Mechanical measurements (tensile strength and elongation) revealed the efficiency of MPSNP/PVA nanocomposite at 5% in the treatment of the aged dyed paper samples. The treated sample with the mentioned material gave tensile strength and elongation values of 84.8 N/nm2 and 1.736%, respectively. In contrast, the treated sample with CNF/PVA nanocomposite at 1% gave the lowest tensile strength and elongation values 38.2 N/nm2, and 1.166%, respectively. FTIR analysis revealed an increase was noticed in the CH2 stretching band (refers to the crystallinity of cellulose), where the intensity of the treated sample with MPSNP/PVA nanocomposite was at a 5% increase compared to the control sample. The FTIR results supported the results of mechanical measurements. The intensity of the CH2 stretching band, which refers to the crystallinity index of cellulose, was increased with the use of MPSNP/PVA nanocomposite at 3% and 5%, which explains the improvement in mechanical properties. This may be due to the nano-mineral particles, which improve the mechanical properties. Additionally, they reduce the effect of accelerated thermal aging on the cellulosic fibers and give them stability. The detailed analysis of analytical methods used for evaluation revealed the novelty of MPSNP/PVA nanocomposite, especially at 5%. It has a potential role in strengthening and improving different properties of the dyed paper manuscripts with madder extract.

A comparative study on the color change of pigments due to the consolidation of conventional spectroscopic techniques and laser-induced breakdown spectroscopy

Influence of pigments and protein aging on protein identification in historically representative casein-based paints using enzyme-linked immunosorbent assay

Degradation of CdS Yellow and Orange Pigments: A Preventive Characterization of the Process through Pump-Probe, Reflectance, X-ray Diffraction, and Raman Spectroscopy

Consolidation materials used with illuminated and non-illuminated paper manuscripts and historical leather bindings: a review

Potential effects of nano-cellulose and nano-silica/polyvinyl alcohol nanocomposites in the strengthening of dyed paper manuscripts with madder: an experimental study

The Characterization of Natural Resins and a Study of Their Degradation in Interactions with Zinc Oxide Pigment

Evaluation of the performance of Hydroxypropyl-β-cyclodextrin for the consolidation of vegetable-tanned leather artifacts

Continuous wave laser thermal restoration of oxidized lead-based pigments in mural paintings

Evaluation of the efficiency of polyacrylamide and poly(MMA-HEMA) for the consolidation of vegetable-tanned leather artifacts

Effect of denture cleansers on color stability and surface roughness of denture bases fabricated from three different techniques: Conventional heat-polymerizing, CAD/CAM additive, and CAD/CAM subtractive manufacturing

Effect of Reduced-Step Polishing Systems on Color Stability of Nanocomposites Submitted to Thermocycling Staining with Common Beverages - An In Vitro Study

Photoageing and durability of a polyester-melamine organic coating on steel: Influence of pigments and multiscale analysis

Use of carboxymethyl cellulose, Klucel G, gum Arabic and zinc oxide nanoparticles nanocomposite as strength agents for inked papyrus

Assessment of color stability and translucency of various CAD/CAM ceramics of different compositions and Thicknesses: An in vitro study

Attenuated total reflection micro FTIR characterisation of pigment–binder interaction in reconstructed paint films

Time-Resolved Photoluminescence Microscopy Combined with X-ray Analyses and Raman Spectroscopy Sheds Light on the Imperfect Synthesis of Historical Cadmium Pigments

Alteration of Asian lacquer: in-depth insight using a physico-chemical multiscale approach

Composition design and anticorrosion performance optimization of zinc molybdate pigments

Comparative Analysis of the Color Stability of Machined Denture Base Materials: An In-Vitro Approach

Effects of Accelerated Aging on Color Stability and Surface Roughness of a Biomimetic Composite: An In Vitro Study

Spectrophotometric evaluation of color stability of novel composites following exposure to antioxidant beverages: An in vitro study