Abstract:Electrohydrodynamic (EHD) printing is an additive manufacturing technique capable of producing micro/nanoscale features by precisely jetting ink under an electric field. However, as a new technique compared to more conventional methods, commercially available inks designed and optimized for EHD are currently very limited. To address this challenge, a new silver nanoink platform was developed by synthesizing silver nanoparticles in situ with biobased polymer 2-hydroxyethyl cellulose (HEC). Typically used as a thickening agent, HEC is cost-effect, biocompatible, and versatile in developing inks that meet the rheology criteria for high-resolution EHD jetting. This approach significantly outperforms the traditional use of polyvinylpyrrolidone (PVP), enabling the stabilization of high solids content (>50 wt %) nanoinks for over 10 months with an HEC dosage 20 times lower than that required by PVP. The HEC-synthesized silver ink displays excellent electrical properties, yielding resistivities as low as 2.81 μΩ cm upon sintering, less than twice that of pure silver. Additionally, the capability to sinter at low temperatures (<200 °C) enables the use of this ink on polymer substrates for flexible devices. The synthesized nanoinks were also found to be capable of producing precise, high-resolution features by EHD printing with smooth lines narrower than 5 μm printed using a 100 μm nozzle. Additionally, a semiempirical model was developed to reveal the relationship between printing resolution, ink properties, and printing parameters, enabling precise printing control. Moreover, for the first time, the unique ability of EHD to achieve precise fabrication under microgravity was conclusively demonstrated through a parabolic flight test utilizing the HEC-based nanoinks. The study greatly expands the potential of printing thin films for the on-demand manufacturing of electronic devices in space.

Laser‐Induced Forward Transfer of High Viscous, Non‐Newtonian Silver Nanoparticle Inks: Jet Dynamics and Temporal Evolution of the Printed Droplet Study

Dynamics of Liquid Transfer from Nanoporous Stamps in High-Resolution Flexographic Printing

Laser-induced Forward Transfer of Silver Nanoparticle Ink Using Burst Technique

Laser Based Hybrid Inkjet Printing of Nanoink for Flexible Electronics

Experimental Study of the Jetting Behavior of High-Viscosity Nanosilver Inks in Inkjet-Based 3D Printing

Conformal laser printing and laser sintering of Ag nanoparticle inks: a digital approach for the additive manufacturing of micro-conductive patterns on patterned ﬂexible substrates

Laser‐Induced Forward Transfer: Fundamentals and Applications

Tilting Behaviors of Metal Microjet in Laser-Induced Forward Transfer

In-Flight Imaging of Aerosol Jet Printer Droplets to Enable Spatially Resolved Flow Rate Measurements

Study of Droplet Formation Process During Drop-on-demand Inkjetting of Living Cell-Laden Bioink.

Dynamics of individual inkjet printed picoliter droplet elucidated by high speed Laser Speckle Imaging

In-tandem Deposition and Sintering of Printed Gold Nanoparticle Inks Induced by Continuous Gaussian Laser Irradiation

Charge Effects and Nanoparticle Pattern Formation in Electrohydrodynamic NanoDrip Printing of Colloids

Printing regime for single metal microdroplet deposition in laser-induced forward transfer

Laser-generated liquid microjets: correlation between bubble dynamics and liquid ejection

Digital laser micro- and nanoprinting

Multiscale simulation study of laser sintering of inkjet-printed silver nanoparticle inks

Titanium Dioxide Nanomaterial Ink Production Through LASiS for Printed Electronics Applications

High-Resolution Imaging of Ejection Dynamics in Laser-Induced Forward Transfer

Many-body Dissipative Particle Dynamics Simulations of Nanodroplet Formation in 3D Nano-Inkjet Printing

Silver Nano-Inks Synthesized with Biobased Polymers for High-Resolution Electrohydrodynamic Printing Toward In-Space Manufacturing