Abstract:Developing hard carbon with a high initial Coulombic efficiency (ICE) and very good cycling stability is of great importance for practical sodium-ion batteries (SIBs). Defects and oxygen-containing groups grown along either the carbon edges or the layers, however, are inevitable in hard carbon and can cause a tremendous density of irreversible Na+ sites, decreasing the efficiency and therefore causing failure of the battery. Thus, eliminating these unexpected defect structures is significant for enhancing the battery performance. Herein, we develop a strategy of applying a soft-carbon coating onto free-standing hard-carbon electrodes, which greatly hinders the formation of defects and oxygen-containing groups on hard carbon. The electrochemical results show that the soft-carbon-coated, free-standing hard-carbon electrodes can achieve an ultrahigh ICE of 94.1% and long cycling performance (99% capacity retention after 100 cycles at a current density of 20 mA g–1), demonstrating their great potential in practical sodium storage systems. The sodium storage mechanism was also investigated by operando Raman spectroscopy. Our sodium storage mechanism extends the "adsorption–intercalation–pore filling–deposition" model. We propose that the pore filling in the plateau area might be divided into two parts: (1) sodium could fill in the pores near the inner wall of the carbon layer; (2) when the sodium in the inner wall pores is close to saturation, the sodium could be further deposited onto the existing sodium.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c12171.Digital picture of the material sandwiched between graphite boards, and SEM image of the carbon paper; digital photograph of large size carbon paper; comparison of XRD, Raman, and infrared spectra of soft carbon; rate performance of HC-P-1200; Nyquist plots of HC-P-1200 and HC-W-1200; full information on operando Raman spectra of the charge–discharge process; periodic variation of the intensity of the charge–discharge for the first cycle, and slope of the second cycle at 1000 and 2000 cm–1 Raman shift (PDF)This article has not yet been cited by other publications.

Self‐Supporting, Flexible, Additive‐Free, and Scalable Hard Carbon Paper Self‐Interwoven by 1D Microbelts: Superb Room/Low‐Temperature Sodium Storage and Working Mechanism

Revitalizing Sodium-Ion Batteries Via Controllable Microstructures and Advanced Electrolytes for Hard Carbon

Soft-Carbon-Coated, Free-Standing, Low-Defect, Hard-Carbon Anode To Achieve a 94% Initial Coulombic Efficiency for Sodium-Ion Batteries

Boosting Sodium Storage Performance of Hard Carbon Anodes by Pore Architecture Engineering

High temperature induced abundant closed nanopores for hard carbon as high-performance sodium-ion batteries anodes

Hard Carbon Microsphere with Expanded Graphitic Interlayers Derived from a Highly Branched Polymer Network as Ultrahigh Performance Anode for Practical Sodium-Ion Batteries

Boosting the Reversible, High‐Rate Na + Storage Capability of the Hard Carbon Anode Via the Synergistic Structural Tailoring and Controlled Presodiation

Boosting the Development of Hard Carbon for Sodium‐Ion Batteries: Strategies to Optimize the Initial Coulombic Efficiency

Low-Cost and High-Performance Hard Carbon Anode Materials for Sodium-Ion Batteries

Hard Carbon/graphene Microfibers As a Superior Anode Material for Sodium-Ion Batteries

From Micropores to Ultra-micropores inside Hard Carbon: Toward Enhanced Capacity in Room-/Low-Temperature Sodium-Ion Storage

Sustainable Fabrication of a Practical Hard Carbon Anode for a Sodium-Ion Battery with Unprecedented Long Cycle Life

Industrial‐scale Hard Carbon Designed to Regulate Electrochemical Polarization for Fast Sodium Storage

Hard Carbon Microsphere with Built-In Electron Transport Channels as a High-Performance Anode for Sodium-Ion Batteries

Extended low-voltage plateau capacity of hard carbon spheres anode for sodium ion batteries

Coupled Carbonization Strategy toward Advanced Hard Carbon for High-Energy Sodium-Ion Battery

Molecular Engineering Enabling High Initial Coulombic Efficiency and Rubost Solid Electrolyte Interphase for Hard Carbon in Sodium‐Ion Batteries

Simultaneously enabling superior ICE and high rate/cycling stability with a hollow carbon nanosphere anode for sodium-ion storage

Engineering surface oxygenated functionalities on commercial hard carbon toward superior sodium storage

Lithium‐Pretreated Hard Carbon as High‐Performance Sodium‐Ion Battery Anodes

Nitrogen/Phosphorus Dual‐Doped Hard Carbon Anode with High Initial Coulombic Efficiency for Superior Sodium Storage