Abstract:Earth-abundant, active, selective and stable electrocatalysts are the cornerstone in our transition to defossilisation of the chemical industry, sector coupling, and sustainable energy. The catalyst surface is known to transform at the interface to the electrolyte, especially under operation conditions. Only the properties of the transformed interface coupled to the underlying layer gives rise to observed metrics like activity and stability. This complicates predictive electrocatalyst materials design – a challenge which can only be tackled by collaborative and interdisciplinary efforts, at the Interface between Chemistry, Physics, Materials Science, and Engineering. I believe this presents one of the main tasks for the young electrochemistry researchers in Europe and around the world, especially since the same challenges also arise in related technologies like Li-ion batteries. In my talk I will discuss how the old wisdom from semiconductor research “the Interface is the device” can be translated into the current challenge “Electrochemistry happens at the Interface”. We need new approaches in designing and studying these electrochemical interfaces for fundamental insights that may in a next step yield better performance in future applications. The talk will be split in two parts. Firstly, I will introduce how single crystalline surfaces can be obtained using epitaxial thin films, and discuss how these can be used to derive atomic-level structure-property relations by synergetic experimental and theoretical investigation. Such films can be fabricated with unit-cell or even atomic-layer precision and enable direct comparison to single facets typically investigated in density functional theory. Secondly, I will discuss opportunities and challenges in surface-sensitive operando characterization in a liquid medium. 1 Information from the outermost surface of a catalyst can be obtained through a standing-wave approach 2,3 or extraction of a surface-only signal from careful thickness-dependent studies. 4 In my ERC project “Interfaces at work”, we are also developing interface-sensitive, laboratory-based operando X-ray photoelectron spectroscopy approaches based on the new XPS user facility at the University of Twente. Throughout the talk, I will refer to examples from LaNiO 3 thin films, which are atomically flat both before and after application as electrocatalysts for the OER during water electrolysis. We selectively tuned the surface cationic composition in epitaxial growth. The Ni-termination is approximately twice as active for the OER as the La-termination. 2 Our ex situ and operando characterization confirmed that the surface transformation pathways – and therefore the electrochemical functionality – depend on a single atomic layer at the surface. A second example will be the introduction of multi-cation compositions in so-called high entropy perovskite oxides (HEO), which can maximize the catalytic activity. The HEO LaCr 0.2 Mn 0.2 Fe 0.2 Co 0.2 Ni 0.2 O 3- δ outperforms all of its parent compounds (single TM-site element in the LaTMO 3 perovskite) by orders of magnitude. 5 X-ray photoemission studies reveal a synergistic effect of simultaneous oxidation and reduction of different transition metal cations during adsorption of reaction intermediates. Rao, R. R., van den Bosch, I. C. G. & Baeumer, C. Operando X-ray characterization of interfacial charge transfer and structural rearrangements. in Reference Module in Chemistry, Molecular Sciences and Chemical Engineering 1–24 (Elsevier, 2023). doi:10.1016/B978-0-323-85669-0.00068-4. Baeumer, C. et al. Tuning electrochemically driven surface transformation in atomically flat LaNiO3 thin films for enhanced water electrolysis. Nat Mater 20 , 674–682 (2021). Martins, H. P. et al. Near total reflection x-ray photoelectron spectroscopy: quantifying chemistry at solid/liquid and solid/solid interfaces. J Phys D Appl Phys 54 , 464002 (2021). Baeumer, C. Operando characterization of interfacial charge transfer processes. J Appl Phys 129 , 170901 (2021). Kante, M. V et al. A High-Entropy Oxide as High-Activity Electrocatalyst for Water Oxidation. ACS Nano (2023) doi:10.1021/acsnano.2c08096. Figure 1

Surface Electrocatalysis: Coupled Inductive Annealing-Electrochemical Setup for Controlled Preparation and Characterization of Alloy Crystal Surface Electrodes (Small Methods 8/2019)

Picomole-Scale Transition Metal Electrocatalysis Screening Platform for Discovery of Mild C-C Coupling and C-H Arylation through <i>in Situ</i> Anodically Generated Cationic Pd

Recent advances in surface x-ray diffraction and the potential for determining structure-sensitivity relations in single-crystal electrocatalysis

Experimental study platform for electrocatalysis of atomic-level controlled high-entropy alloy surfaces

Electrocatalysis at Restructured Metal and Alloy Surfaces

(Invited) Electrochemistry Happens at the Interface

High‐Throughput UV‐Induced Synthesis and Screening of Alloy Electrocatalysts

Local Heating Induced Single‐Crystalline Phase Control in Electrochemical Synthesis of Nanomaterials

Lab‐based electrochemical X‐ray photoelectron spectroscopy for in‐situ probing of redox processes at the electrified solid/liquid interface

A Versatile Approach to Electrochemical In Situ Ambient-Pressure X-ray Photoelectron Spectroscopy: Application to a Complex Model Catalyst

In-situ lattice tuning of quasi-single-crystal surfaces for continuous electrochemical modulation

Approaches to achieve surface sensitivity in the in situ XAS of electrocatalysts

Surface electrocatalysis on high-entropy alloys

Probing Surface Transformations of Lanthanum Nickelate Electrocatalysts during Oxygen Evolution Reaction

An on-chip electrical transport spectroscopy approach for in situ monitoring electrochemical interfaces

Self-Formation of Compositionally Complex Surface Oxides on High Entropy Alloys Observed by Accelerated Atom Probe Tomography: A Route to Sustainable Catalysts

In Situ and Operando X-ray Scattering Methods in Electrochemistry and Electrocatalysis

Wireless potentiometry of thermochemical heterogeneous catalysis

Operando Methods in Electrocatalysis

Elucidating Interfacial Parameters of Platinum–Palladium Bulk Alloy Single Crystals

Impact of Surface Charging on Catalytic Processes