Abstract:Geometric complexities and multi-physical phenomena add difficulties for predicting the thermal field and hence thermal management of an electric motor. A numerical design model that combined electromagnetic and thermal-fluid analysis was proposed for disclosing the detailed temperature distributions of each component in an electric motor. The thermal fluid analysis implemented ANSYS-Fluent code to unravel the thermal field of the interior permanent magnet synchronous electric motor fitted with a smooth or novel spirally twisted channel in the cooling water jacket of a stator with and without shaft cooling. In accordance with the thermal powers converted from the various electromagnetic losses of the electric motor, the complex heat conduction model with realistic thermal boundary conditions was formulated. Initially, the turbulent flow structures and channel averaged Nusselt numbers of the spiral channels without and with the sectional twist were comparatively examined for acquiring the convective thermal boundary conditions in the water jacket. With the high thermal conductivity of the aluminum water jacket, the heat-transfer improvements from the smooth-spiral-channel conditions by using the twisted spiral channel were effective for reducing the average temperatures by about 10% but less effective for altering the characteristic thermal field in the water jacket. At 1290 < Dn < 6455 or 5000 < Re < 25,000 for the spiral channel flows, the channel average Nusselt numbers ratios between the smooth and twisted spiral channels were elevated to 1.18–1.09 but decreased with the increase of Dn or Re. A set of heat-transfer correlations for estimating the Nusselt numbers of Taylor flow in the rotor-to-stator air gap was newly devised from the data available in the literature. While the cooling effectiveness of the water jacket and shaft was boosted by the sectional twists along the spiral channel of the water jacket, the presence of Taylor flow in the annual air gap prohibited the effective rotor-to-stator heat transmission, leading to hot spots in the rotor. By way of airflow cooling through the rotating hollow shaft, the high temperatures in the rotor were considerably moderated. As the development of Taylor flow between the rotor and stator was inevitable, the development of active or passive rotor cooling schemes was necessary for extending the power density of an electric motor. Unlike the previous thermal circuit or lumped-parameter thermal model that predicted the overall temperatures of motor components, the present coupled electromagnetic and thermal-fluid model can reveal the detailed temperature distributions in an electric motor to probe the local hot spots of each component in order to avoid overheating at the early design stage.

Thermal Integration of a High-Frequency High-Specific-Power Motor within Electrically Variable Engine

Thermal Management of High-Power Density Electric Motors for Electrification of Aviation and Beyond

3D Thermal Analysis of a Permanent Magnet Motor with Cooling Fans

Cooling of 1 MW Electric Motors through Submerged Oil Impinging Jets for Aeronautical Applications

Thermal analysis of a fluid immersed brushless DC motor for aerospace applications

Thermal Field Analysis of Electric Propulsion Drive Motors with Flat Heat Pipe Cooling

Thermal Management System for an Electric Machine With Additively Manufactured Hollow Conductors With Integrated Heat Pipes

On the Design of Integrated Thermal Management Systems for eVTOL Aircraft

A Review of Thermal Designs for Improving Power Density in Electrical Machines

Coupled Thermal-Electromagnetic Parametric Modeling of Permanent Magnet Machine Based on Flat Heat Pipe Cooling

Innovative Design of Cooling System for a High-Torque Electric Machine Integrated with Power Electronics

Heat Transfer and Thermal Management of Interior Permanent Magnet Synchronous Electric Motor

Equivalent Thermal Conductivity Improvement of Stator Winding and Thermal Benefit for Air-Cooled Electrical Aviation Machine

Thermal Management Integrated with Flat Heat Pipes for In-Slot Stator Windings of Electric Motors

Transient Nature of Flight and Its Impact on Thermal Management for All Electric Aircraft

Modeling of Ducted-Fan and Motor in an Electric Aircraft and a Preliminary Integrated Design

Thermal Benefits of a Cooling Guide Vane for an Electrical Machine in an Electric Ducted Fan

Thermal Analysis of an Interior Permanent Magnet Synchronous Traction Motor for High Speed Railway Applications

Analysis of Cooling Structure of Axial Flux Permanent-Magnet Synchronous Motor for Electric Aircrafts

Optimization of Motor Heat Dissipation Systems Based on Three Dimensional Flow Field Analysis

Thermal Optimization of a Totally Enclosed Forced Ventilated Permanentmagnet Traction Motor Using Lumped Parameter and Partial Computational Fluid Dynamics Modeling