Abstract:Recently, indoor organic photovoltaics (IOPV) has gradually entered people's field of vision due to the elevated demands of Internet of Things (IoTs). However, the mismatch between the absorption spectrum of organic photovoltaic materials and the emission spectrum of indoor light sources limit the output power of IOPV, which do not meet the requirement of IoTs. In order to clarify this issue, we fabricated three different OPVs by screening three electron acceptors with different absorption spectrum, PC71BM, N2200, and PYF-T, to match with a high-performance wide-bandgap electron-donating polymer containing imide-functionalized benzotriazole units (PTzBI-oF). PYF-T-based device performed best under AM 1.5G sunlight illumination, while PC71BM-based device performed best under indoor LED illumination, which can be attributed to the suppressed dark current (JD) and significantly enhanced parallel resistance (RP) of PC71BM-based device. We systematically analyzed and understood the interrelationship between the absorption spectrum, JD, RP, phase separation morphology, crystalline and orientation behavior, and photovoltaic performance of IOPVs, proving that an extremely low JD and sufficiently large RP is crucial for fabricating efficient IOPVs. The JD suppression can be achieved by morphology regulation of the active layer, where the donor-acceptor pair needs to display a suitable phase separation scale, strong crystallinity, and ideal molecular orientation for the donor-acceptor interface. Our work can provide guidance for the future design of donor-acceptor pairs for efficient IOPV, and promote the further application of IOPV.

Wide-gap non-fullerene acceptor enabling high-performance organic photovoltaic cells for indoor applications

Non-Fullerene Acceptor for Organic Solar Cells with Chlorination on Dithieno[3,2-b:2′,3′-d]pyrrol Fused-Ring

Medium Bandgap Non‐fullerene Acceptor Enabling Organic Photovoltaic Cell with 30% Efficiency Under Indoor Artificial Light

Achieving 31% efficiency in organic photovoltaic cells under indoor light using a low energetic disorder polymer donor

100 cm2 Organic Photovoltaic Cells with 23% Efficiency under Indoor Illumination

A highly crystalline non-fullerene acceptor enabling efficient indoor organic photovoltaics with high EQE and fill factor

High-performance Indoor Organic Photovoltaics Enabled by Screening Multiple Cases of Electron Acceptors

Precisely Controlling Polymer Acceptors with Weak Intramolecular Charge Transfer Effect and Superior Coplanarity for Efficient Indoor All‐Polymer Solar Cells with over 27% Efficiency.

High performance indoor light harvesters with a wide-gap donor polymer PBDB-T

1 cm2 Organic Photovoltaic Cells for Indoor Application with over 20% Efficiency

Simple Non‐Fused Electron Acceptors Leading to Efficient Organic Photovoltaics

Non-fused medium bandgap electron acceptors for efficient organic photovoltaics

Insights into the photovoltaic mechanism of organic photovoltaics under solar and artificial light

Optimizing Spectral and Morphological Match of Nonfullerene Acceptors Toward Efficient Indoor Organic Photovoltaics with Enhanced Light Source Adaptability

Over 31% Efficient Indoor Organic Photovoltaics Enabled by Simultaneously Reduced Trap-assisted Recombination and Non-radiative Recombination Voltage Loss

Low-Cost Fully Non-fused Ring Acceptor Enables Efficient Organic Photovoltaic Modules for Multi-Scene Applications

Medium band-gap non-fullerene acceptors based on a benzothiophene donor moiety enabling high-performance indoor organic photovoltaics

Single-Junction Organic Solar Cell with over 15% Efficiency Using Fused-Ring Acceptor with Electron-Deficient Core

Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages

High-performance organic photovoltaic modules using eco-friendly solvents for various indoor application scenarios

Enabling low voltage losses and high photocurrent in fullerene-free organic photovoltaics