Catalysis Of Lignin Depolymerization In Ionic Liquids
SongYan Jia,Blair J. Cox,Xinwen Guo,Zongchaoconrad Zhang,John G. Ekerdt
2010-01-01
Abstract:The use of renewable feedstocks by the chemical industry will displace petroleum-based feedstocks, possibly extending petroleum reserves and may positively impact the carbon footprint of a process or product. Biofuel production that is based on cellulosic feedstocks will require treating biomass to depolymerize the lignin and release the cellulosic fraction and it is generally accepted that lignin degradation is a rate-limiting step in lignocellulose degradation. Lignin, accounting for 18-40 wt% of the dry wood, is the second most abundant biomass component, is rich in benzene rings and could be a potential feedstock for aromatic chemical compounds. However, due to its complex structure, lignin is degraded inefficiently at present. Lignin is mainly composed of phenylpropane monomers that link together primarily through the C-O linkage of α- and β-ether bonds. The β-O-4 linkage is found to be dominant in lignin; therefore, efficiently cleaving the β-O-4 linkage is an optional strategy for the degradation of lignin while preserving the aromatic character of the fragments. Acid-catalyzed hydrolysis is one method for cleaving the β-ether bonds of lignin; studies on the hydrolysis of b-ether bonds in phenylpropane dimer model compounds have been carried out with hydrochloric acid or AlCl3 as catalyst in dioxane-water or ethanol-water solvents. Ionic liquids (ILs) have attracted much attention as a medium for biomass conversion. ILs have been found to be a direct wood pulp solvent capable of solubilizing lignocellulose. 1-H-3-methylimidazolium chloride ([HMIM]Cl) has been shown to act as both solvent and catalyst for the dehydration of sugars. Since [HMIM]Cl is an easily synthesized and low-cost acidic IL, and it is non-volatile and reusable, we explored its potential as the solvent and acid catalyst for the hydrolytic cleavage of β-O-4 linkages in lignin. We also have investigated hydrolyzed 1-butyl-3-methylimidazolium methylsulfate [BMIM]MeSO4 as both the solvent and acid catalyst. Finally, given that metal chlorides dissolved in ionic liquids have been effective for the hydrolysis of glycosidic bonds in celluslose we studied various metal chlorides (LiCl, FeCl3, FeCl2ℜ • 4H2O, MnCl2ℜ • 4H2O, AlCl3, CrCl3ℜ • 6H2O, CoCl2, CuCl, CuCl2, PdCl2, NiCl2, and VCl3) in 1-butyl-3-methylimidazolium chloride ([BMIM]Cl. We worked with two model compounds guaiacylglycerol-β-guaiacyl ether (GG) to represent the phenolic β-O-4 linkages and veratrylglycerol-β-guaiacyl ether (VG) to represent the non-phenolic β-O-4 linkages. Reactions were performed in 0.3 ml, sealed and stirred reaction vials. Products were monitored using high pressure liquid chromatography (HPLC) equipped with a UV detector. The dimeric phenolic lignin surrogate compounds, GG and VG, were used to avoid analytical complications in understanding the cleavage of phenolic β-O-4 linkages of lignin. The anticipated primary products are guaiacol, Hibbert's ketones, coniferyl alcohol, enol ether (EE), and the vinyl ethers (VE). We tested the stabilities of guaiacol and coniferyl alcohol - the products of GG ether hydrolysis - in the reaction media; guiacol was stable and coniferyl alcohol undergoes subsequent reaction so guaiacol is tracked to follow ether bond cleavage. Vinyl ether isomers were characterized by liquid chromatography-mass spectroscopy (LCMS), however, they were not stable as reported, so we did not quantitatively monitor vinyl ether isomer yield or production. GG (or VG) conversion is based on the amount of unreacted GG (VG) detected by liquid chromatography and the amount added to the reactor. Guaiacol yield (moles of guaiacol produced/moles of GG [VG] added) is used to evaluate the cleavage of the β-O-4 linkage. We found an efficient method for the cleavage of β-O-4 bonds of phenolic and non-phenolic lignin model compounds in the acidic ionic liquid, [HMIM]Cl, in which more than 70% of the β-O-4 bonds of both GG and VG reacted to give guaiacol at 150 °C. There was little change in the reactivity of GG and VG as the substrate concentration increased from 8 wt% to 32 wt%. The ionic liquid solvent could be easily reused without extra treatment or loss of activity. An increase in available water can lead to more β-O-4 bond cleavage. We also found [BMIM]MeSO4 to be equally effective in the conversion of GG, producing 75% guaiacol yields at 150 °C. A possible mechanistic pathway accounting for the major products is presented. The acidic ionic liquid approach discussed in the talk may have potential to degrade real lignin (or lignocelluloses) and produce platform chemicals in a one-pot process. The metal chlorides FeCl3, CuCl2, and AlCl3 were shown effective in catalyzing the cleavage of the b-aryl bond in GG. Studies indicate the metal chlorides functioned by generating HCl in situ; AlCl3 through hydrolysis with H2O and CuCl2 and FeCl3 through hydrolysis with the phenolic H of GG. This HCl then catalyzed the reaction similarly to [HMIM]Cl alone.