Abstract:Electrochemical impedance spectroscopy (EIS) is a widely used method to characterize the biological materials. In traditional methods for EIS, a sinusoidal current is used to excite the material under test and the measured voltage across that material is demodulated by a linear multiplication with quadrature sinusoidal signals. From the resulting demodulated output, the impedance (magnitude and phase) can be calculated. Although this sine-wave-based impedance measurement method can produce accurate impedance measurements, it requires bulky components and suffers from poor power efficiency due to sinusoidal waveform generation and linear multiplication. Alternatively, a method using square-wave signal, which is simply a clock, for both excitation and demodulation can be much more area and power efficient, but inherently suffers from substantial errors in the result due to significant harmonics in square waves. In this paper, we propose a technique to cancel out the errors caused by such harmonics of the square-wave-based excitation and demodulation. The proposed technique, based on the fact that the magnitude ratio of all the harmonics of a square wave are known, cancels out harmonic errors by subtracting or adding the square-wave-based measured results at higher harmonic frequencies as a simple post-processing calculation. Simulations on specific and also generic impedance models demonstrate the applicability of this technique to various impedance models. Experimental results using a discrete circuit model show that this technique can provide a precise measurement of the impedance with 1% magnitude error and 0.5° phase error considering just five terms. In addition, measurements with a biological tissue show an average magnitude and phase error of 0.7% and [Formula: see text], respectively, using the proposed error cancellation. Because this method replaces sinusoidal signal generation and linear multiplication with clock generation and simple switching, it has great potential to be integrated in a wearable and implantable health monitoring device at low area and power consumption.

The determination of measurement errors in impedance spectroscopy

On accurate differential measurements with electrochemical impedance spectroscopy

Perturbation Amplitudes Design Method Based on Confidence Interval Evaluation for Impedance Measurement

A high-accuracy impedance spectrometer for measuring sediments with low polarizability

Measurement Accuracy Improvement With Pzt Scanning For Detection Of Dpc In Hi-Bi Fibers

The removal of the polarization errors in low frequency dielectric spectroscopy

Measurement error analysis in the determination of microwave dielectric properties using cavity reflection method

Understanding the Validity of Impedance and Modulus Spectroscopy on Exploring Electrical Heterogeneity in Dielectric Ceramics

Accuracy Bottlenecks in Impedance Spectroscopy due to Transient Effects

Applications of Impedance Spectroscopy

Impact of Measurement Uncertainty on Modeling of Dielectric Relaxation in Aqueous Solutions

Impedance Spectroscopy for Electroceramics and Electrochemical System

Fundamentals of Impedance Spectroscopy

Complex impedance measurements of calorimeters and bolometers: correction for stray impedances

An Improved Impedance Measurement Method Based on Multi-Sine Signal Considering the Suppression of Noise Interference

Improved Ultrasonic Spectroscopy Methods for Characterization of Dispersive Materials.

Understanding error rejection of differential impedance spectroscopy for the characterization of highly conductive fluids

Fine Representation of Dielectric Properties by Impedance Spectroscopy

A Harmonic Error Cancellation Method for Accurate Clock-Based Electrochemical Impedance Spectroscopy

Analysis of monolithic I/Q based impedance measurement circuits: Impact of non-ideal circuit effects on accuracies

High-Accuracy Wide-Range Measurement Method for Determination of Complex Permittivity in Reentrant Cavity: Part A --- Theoretical Analysis of the Method