Fluorescence–phosphorescence dual emissive carbon nitride quantum dots show 25% white emission efficiency enabling single-component WLEDs

Ting Yuan,Fanglong Yuan,Xiaohong Li,Yunchao Li,Louzhen Fan,Shihe Yang

DOI: https://doi.org/10.1039/c9sc03492g

IF: 8.4

2019-01-01

Chemical Science

Abstract:Blue-yellow fluorescence–phosphorescence dual emission from single-component white emissive W-CNQDs with a high PLQE of 25% is reported for the first time.

What problem does this paper attempt to address?

White LED Based on YAG : Ce,Gd Phosphor and CdSe–ZnS Core/Shell Quantum Dots

Chang-yu Shen,Ke Li,Qiang-long Hou,Hua-jun Feng,Xin-yong Dong

DOI: https://doi.org/10.1109/lpt.2010.2046724

IF: 2.6

2010-01-01

IEEE Photonics Technology Letters

Abstract:Core/shell CdSe-ZnS quantum dots (QDs) with a peak emission wavelength of 618 nm and size of ~ 5.5 nm were synthesized by thermal deposition approach. High photoluminescence efficiency with a quantum yield of more than 48% has been achieved. Red-shift of a peak emission wavelength from 532 to 568 nm was realized by doping Gd3+ ions into the YAG : Ce3+ to substitute some Y3+ ions. To compensate the poor color rendering index (CRI) of the YAG : Ce-based white light-emitting diode (LED) due to the lack of red spectral component, CdSe-ZnS QDs were blended into YAG : Ce3+ , Gd3+ phosphors. Prominent spectral evolution has been achieved by increasing the content of QDs. White LED combining a blue LED with the blends of phosphor and QDs with a weight ratio of 1:1, has been demonstrated with an improved CRI value of 90.
An Efficient Green-Emitting Quantum Dot with Near-Unity Quantum Yield and Suppressed Auger Recombination for High-Performance Light-Emitting Diodes

Xiaokun Fan,Zhen Mu,Zhao Chen,Yunfeng Zhan,Fanyuan Meng,Yang Li,Guichuan Xing,Wai-Yeung Wong

DOI: https://doi.org/10.1016/j.cej.2023.142027

IF: 15.1

2023-01-01

Chemical Engineering Journal

Abstract:Near 100% photoluminescence quantum yield (PL QY) is the first target for designing luminescent quantum dots (QDs). Here, an alloyed QD with a core/shell structure of Cd0.194Zn0.806Se0.406S0.594/ZnS is synthesized and characterized by the feature of large core size (about 10 nm) and thin shell (around three ZnS monolayers). It exhibits an efficient green emission with the PL QY of 99.8% and ultra-fast radiative transition rate (kr) of 4.16 x 107 s-1. It demonstrates that the excited state will be rapidly decayed to its ground state through a radiative channel and less vulnerable to non-radiative processes. Under a high pump intensity (254.65 mu J cm - 2), the Cd0.194Zn0.806Se0.406S0.594/ZnS QD still owns a long biexciton decay lifetime (tau xx) of 1.05 ns and high biexciton QYxx of 25.1%, corresponding to a suppressed non-radiative Auger recombination. The Cd0.194Zn0.806Se0.406S0.594/ZnS QD based light-emitting diode exhibits a peak external quantum efficiency of 20.1% and brightness of over105 cd m-2 at 5.2 V. We believe that the Cd0.194Zn0.806Se0.406S0.594/ZnS QD not only provides a near-unity QY but also ensures its QD based light-emitting diode (QLED) with an excellent performance, which could be an excellent QD material for QLED applications.
White Light Emitting Diodes Based on Green Graphene Quantum Dots and Red Graphene Quantum Dots

Luqiao Yin,Doudou Zhang,Weitao Li,Yameng Hu,Liang Wang,Jianhua Zhang

DOI: https://doi.org/10.1080/15421406.2021.1971850

IF: 0.7

2022-01-01

Molecular Crystals and Liquid Crystals

Abstract:White light emitting diodes (WLEDs) have attracted the attention of numerous scholars because of its high photoelectric conversion efficiency, low energy consumption and high reliability. They are known as the new generation of lighting energy in the twenty first century. Currently, the most common WLEDs are combined by blue LED chip and ce-doped yttrium aluminum garnet (YAG: Ce3+) yellow phosphors. The advantages are simple production, low cost and high luminous efficiency. However, WLEDs made of blue LED chip and yellow phosphors lacks red spectrum and exhibits luminescence, and its color rendering index (CRI) is low, usually only 70. At the same time, quantum dots (QDs) are considered to be the most potential materials for WLEDs color conversion layers due to their wide excitation spectrum, narrow emission spectrum, adjustable band gap and high quantum yield. In this paper, we fabricated green graphene QDs (GQDs) and red GQDs, measured and analyzed their morphology, structure and photoluminescence. The green GQDs, red GQDs and yellow phosphors were used to fabricate the WLEDs. The produced WLEDs showed excellent optical performance and working performance, among which Commission International de L 'Eclairage (CIE) chromaticity coordinates are (0.3332, 0.3359), and the correlated color temperature (CCT) is 5464 K (driving current is 30 mA). Electroluminescence (EL) spectra of the device at different currents were also measured.
53% Efficient Red Emissive Carbon Quantum Dots for High Color Rendering and Stable Warm White‐Light‐Emitting Diodes

Zifei Wang,Fanglong Yuan,Xiaohong Li,Yunchao Li,Haizheng Zhong,Louzhen Fan,Shihe Yang

DOI: https://doi.org/10.1002/adma.201702910

IF: 29.4

2017-07-31

Advanced Materials

Abstract:Red emissive carbon quantum dots (R-CQDs) with quantum yield of 53% is successfully prepared. An ultraviolet (UV)-pumped CQD phosphors-based warm white light-emitting diode (WLED) is realized for the first time and achieves a color rendering index of 97. This work provides a new avenue for the exploration of low cost, environment-friendly, and high-performance CQD phosphors-based warm WLEDs.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
High Color Rendering Index and Tunable Color Temperature of White Light Emitting Diodes with Yellow Emitting Graphene Quantum Dots Coated

Jipeng Zhou,Luqiao Yin,Jianhua Zhang,Liang Wang

DOI: https://doi.org/10.1109/ifws.2017.8245965

2017-01-01

Abstract:In this work, we report the hydrothermal synthesis of yellow emitting graphene quantum dots (GQDs). The as prepared GQDs were fixed in polymer-silica hybrid matrix, deposited on InGaN blue chip and formed as transparent flexible color conversion layer of white light emitting diodes (WLED). The properties of GQDs and devices were also investigated, and we found the GQDs exhibit stable fluorescence in the ethanol solution. The as prepared GQDs WLED shows extremely high color rendering index (CRI) reaching up to 92. And in this work we realized the correlated color temperature (CCT) tunable (from 3200K to 9200K) by adjusting the thickness of GQDs color conversion layer or the concentration of GQDs solution. The color coordinates of WLEDs distribute close to the Planckian locus. These results indicate that the GQDs might be a promising candidate as yellow-emitting phosphor for white LEDs.
Achieving 46% efficient white-light emissive carbon dot-based materials by enhancing phosphorescence for single-component white-light-emitting diodes

Qijun Li,Yuchen Li,Shuai Meng,Jian Yang,Yukun Qin,Jing Tan,Songnan Qu

DOI: https://doi.org/10.1039/d1tc01001h

IF: 6.4

2021-01-01

Journal of Materials Chemistry C

Abstract:46% efficient white-light emissive carbon dot-based materials are successfully prepared by enhancing phosphorescence emission and are applied to single-component white-light-emitting diodes.

materials science, multidisciplinary,physics, applied
Blue and green double band luminescent carbon quantum dots: Synthesis, origin of photoluminescence, and application in white light-emitting devices

Xifang Chen,Wenhui Wu,Wenxia Zhang,Ziye Wang,Zhenjin Fu,Lei Zhou,Zao Yi,Gongfa Li,Liangcai Zeng

DOI: https://doi.org/10.1063/5.0046495

IF: 4

2021-04-12

Applied Physics Letters

Abstract:Carbon quantum dots (CQDs) have become an excellent candidate for light-converting phosphors. However, it is a challenge to develop white emission CQDs and overcome the agglomeration in the process of solid-state CQDs. Here, white fluorescence CQDs with graphite core structure were synthesized by a one-step hydrothermal method from 1,3-dihydroxynaphthalene and hydrochloric acid. The photoluminescence spectra and surface structure characterization along with UV-Vis absorption spectrum, photoluminescence excitation, and time-resolved photoluminescence spectra together reveal the luminescence of CQDs stems from carbon-oxygen-related surface fluorophores. The principle of solvent similarity compatibility is an effective thought to choose isolating matrix material for the sake of overcoming the agglomeration of CQDs in the process of forming solid film. Solid-state white light emitting device (WLED) was fabricated using the CQDs embedded in polymethyl methacrylate matrix as a single white-light converter excited by a 365 nm UV-LED chip. The fabricated WLED based on CQDs is cold white light source with CIE coordinates (0.3122, 0.3429) and with CCT of 6428 K.

physics, applied
A Facile Approach to Solid-State White Emissive Carbon Dots and Their Application in UV-Excitable and Single-Component-Based White LEDs

Xiangyu Feng,Kai Jiang,Haibo Zeng,Hengwei Lin

DOI: https://doi.org/10.3390/nano9050725

2019-05-10

Abstract:Large-scale applications of conventional rare-earth phosphors in white light-emitting diodes (W-LEDs) are restricted by the non-renewable raw material sources and high energy consumption during the production process. Recently, carbon dots (CDs) have been proposed as promising alternatives to rare-earth phosphors and present bright prospects in white lighting. However, the use of CDs in W-LEDs still has two major obstacles, i.e., solid-state quenching and lack of single-component white emissive products. In this work, a facile, rapid, and scalable method for the preparation of solid-state white emissive CDs (W-CDs) is reported via microwave-irradiation heating of L-aspartic acid (AA) in the presence of ammonia. The W-CDs exhibit blue photoluminescence (PL) in dilute aqueous dispersion and their emission spectra gradually broaden (emerging new emissions at orange-yellow regions) with concentration increases. Interestingly, the W-CDs powder displays a very broad PL spectrum covering nearly the whole visible-light region under ultraviolet (UV) excitation, which is responsible for the observed white emission. Further studies revealed that the self-quenching-resistance feature of the W-CDs is probably due to a covering of polymer-like structures on their surface, thus avoiding the close contact of nanoparticles with each other. PL emission of the W-CDs is reasonably ascribed to a cross-linked enhanced effect (CEE) of the sub-fluorophores contained in the material (e.g., -NH2 and C=O). Finally, applications of the W-CDs in fabricating single-component-based W-LEDs using commercially available UV chips were attempted and shown to exhibit satisfactory performances including high white light-emitting purity, high color rendering index (CRI), and tunable correlated color temperature (CCT), thus rendering great promise for W-CDs in the field of white lighting.
Single-phase excitation-wavelength-independent nitrogen doped graphene quantum dots for fabrication of white light-emitting diodes (WLEDs)

Yue Xu,Lubin Liu,Miaojun Xu,Wei Feng,Lili Wang,Xiaobiao Shan,Li Li Wang

DOI: https://doi.org/10.1039/d3nj03338d

IF: 3.3

2023-08-23

New Journal of Chemistry

Abstract:At present, most white light-emitting diodes (WLED)s are modulated by mixing one or more kinds of quantum dots with a certain rare earth phosphor. However, due to the limited rare earth resources, non-renewable, and expensive, it is urgent to develop a solution that does not rely on rare earths to solve the above problems. In this study, we used hydrothermal method to fabricated the nitrogen-doped graphene quantum dots (N: GQDs) using citric acid and piperazine as carbon and nitrogen source. The N: GQDs exhibited blue fluorescence in solution under UV excitation at 365 nm, while exhibits white luminescence in the solid state. The Commission Internationale de l'Enclairage coordinates and correlated color temperatures (CCTs) for the WLEDs based on N: GQDs are (0.28, 0.31) and 7469 K, respectively, and the WLED presented an outstanding color rendering index up to 92.3, which realize the preparation of LED phosphors by single quantum dots for WLED, and is promised using as backlights in lighting sources and displays.

chemistry, multidisciplinary
White Organic Light-Emitting Diodes Based on a Yellow Phosphorescence Iridium Complex and a High-Efficiency Blue Fluorescence

Shiming Zhang,Ziyang Liu,Xuehui Wang,Shouzhen Yue,Zhensong Zhang,Qingyang Wu,Guohua Xie,Qin Xue,Yu Chen,Peng Wang,Runda Guo,Dalong Qu,Yi Zhao,Shiyong Liu

DOI: https://doi.org/10.1016/j.tsf.2013.04.036

IF: 2.1

2013-01-01

Thin Solid Films

Abstract:We have demonstrated white organic light-emitting diodes (WOLEDs) based on a yellow phosphorescence iridium complex and an efficient blue fluorescence. The property of the blue fluorescence is studied and the pure blue device can obtain a peak current efficiency (CE) of 8.5cd/A. The best obtained WOLED shows a peak CE of 24.7cd/A at 1000cd/m2 with Commission Internationale De L'Eclairage coordinate of (0.44, 0.48), while WOLEDs based on different architectures exhibit good color stability.
Enhancing White Light-Emitting Diode Performance with Ultra-Wide Spectrum ZnS:Mn-CDs@SiO2 Dual Core@Shell Composite

Yuanhui Zheng,Haijiang Qiu,Song Yang,Min Li,Haixin Chen,Yongqi Zhang,Xin Chen

DOI: https://doi.org/10.1039/d4qi01099j

IF: 7.779

2024-11-28

Inorganic Chemistry Frontiers

Abstract:Recent progress in the field of carbon dots (CDs) has highlighted their significant potential, attributed to their exceptional optical properties and diverse applications, most notably in the realm of white light-emitting diodes (WLEDs). CDs are recognized for their broad spectrum of emission, adjustable fluorescence, and excellent thermal stability, making them ideal candidates for use in WLEDs. However, the challenge lies in synthesizing CDs that can emit long-wavelength, multicolor light from a single host material. This research presents a highly efficient dual-core-shell structured white-emitting phosphor, denoted as ZnS:Mn-CDs@SiO2, which has achieved an impressive photoluminescence quantum yield (PLQY) of 25.8% and an expansive full width at half maximum (FWHM) of 131 nm. The successful implementation of this novel material has led to the creation of WLEDs with Commission Internationale de l'Eclairage (CIE) coordinates at (0.32, 0.38) and a correlated color temperature (CCT) of 5856 K, marking a significant stride in the development of high-performance WLEDs.

chemistry, inorganic & nuclear
Ultrabroad-band, white light emission from carbon dot-based materials with hybrid fluorescence/phosphorescence for single component white light-emitting diodes

Yuchen Li,Qijun Li,Shuai Meng,Yukun Qin,Dengke Cheng,Hailing Gu,Zifei Wang,Yunxia Ye,Jing Tan

DOI: https://doi.org/10.1016/j.cclet.2022.107794

IF: 9.1

2023-03-25

Chinese Chemical Letters

Abstract:Benefiting from the large Stokes shift between fluorescence and phosphorescence, fluorescence/phosphorescence dual-emitting carbon dots (CDs) have gradually entered at the stage of single-phase white light-emitting diodes (WLEDs) as 'green material'. However, most of the developed dual-emitting CDs have weak phosphorescence, short emission wavelength and narrow emission band, resulting in relatively bluish white light emission and low color rendering index (CRI). Herein, an ultrabroad-band fluorescence/phosphorescence dual-emitting CD-based material () is prepared by thermal treatment of boric acid (BA) and CDs with large conjugated structure. The stable covalent bonding between CDs and BA, as well as three-dimensional spatial restriction effect of self-polymerization BA molecules around CDs during long-term heating efficiently rigidified the single/triplet excited states of CDs from non-radiative deactivation, thus producing strong dual emissive materials with the high phosphorescence quantum yield of 21%. Remarkable, the prepared powders exhibit bright pure white light emission with Commission Internationale de l'Eclairage (CIE) coordinates of (0.32, 0.33) and the highest reported full width at half maximum of 250 nm. Based on the unique characteristics of , it was used as a color conversion layer to prepare a WLED with CIE coordinates of (0.35, 0.33) and the CRI value of 87.

chemistry, multidisciplinary
Ultrabroad-band, Red Sufficient, Solid White Emission from Carbon Quantum Dot Aggregation for Single Component Warm White Light Emitting Diodes with a 91 High Color Rendering Index.

Ting Meng,Ting Yuan,Xiaohong Li,Yunchao Li,Louzhen Fan,Shihe Yang

DOI: https://doi.org/10.1039/c9cc01794a

IF: 4.9

2019-01-01

Chemical Communications

Abstract:An ultrabroad-band solid white emission from carbon quantum dot aggregation with a full width at half maximum over 200 nm throughout the entire visible light window and, even better, with a sufficient red component is first reported. UV pumped WLEDs are fabricated by integrating phosphors onto a UV-LED chip, and they show favorable warm white light characteristics with CIE coordinates of (0.42, 0.38) and a 91 high color rendering index.
Recent Advances in White Light-Emitting Diodes of Carbon Quantum Dots

Ping He,Yuxin Shi,Tao Meng,Ting Yuan,Yunchao Li,Xiaohong Li,Yang Zhang,Louzhen Fan,Shihe Yang

DOI: https://doi.org/10.1039/c9nr10958g

IF: 6.7

2020-01-01

Nanoscale

Abstract:Carbon quantum dots (CQDs) have shown great potential in optoelectronic applications. Very recently, CQDs have attracted much attention in white-emitting diodes (WLEDs) for lighting due to their characteristic broad emission, tunable fluorescence emission and high thermal stability. This mini review updates the latest research in the design of high-performance WLEDs with different correlated color temperatures by tuning the red component using red emissive CQDs and single-component white emissive CQDs (SCWE-CQDs). The prospects for the development of CQD based WLEDs with higher efficiency and color quality will be discussed.
Highly efficient and stable white LEDs based on pure red narrow bandwidth emission triangular carbon quantum dots for wide-color gamut backlight displays

Fanglong Yuan,Ping He,Zifan Xi,Xiaohong Li,Yunchao Li,Haizheng Zhong,Louzhen Fan,Shihe Yang

DOI: https://doi.org/10.1007/s12274-019-2420-x

IF: 9.9

2019-05-08

Nano Research

Abstract:High-performance white light-emitting diodes (WLEDs) hold great potential for the next-generation backlight display applications. However, achieving highly efficient and stable WLEDs with wide-color-gamut has remained a formidable goal. Reported here is the first example of pure red narrow bandwidth emission triangular CQDs (PR-NBE-T-CQDs) with photoluminescence peaking at 610 nm. The PR-NBE-T-CQDs synthesized from resorcinol show high quantum yield (QY) of 72% with small full width at half maximum of 33 nm. By simply controlling the reaction time, pure green (PG-) NBE-T-CQDs with high QY of 75% were also obtained. Highly efficient and stable WLEDs with wide-color-gamut based on PR- and PG-NBE-T-CQDs was achieved. This WLED showed a remarkable wide-color gamut of 110% NTSC and high power efficiency of 86.5 lumens per Watt. Furthermore, such WLEDs demonstrate outstanding stability. This work will set the stage for developing highly efficient, low cost and environment-friendly WLEDs based on CQDs for the next-generation wide-color gamut backlight displays.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Light‐Emitting Diodes: Bright Multicolor Bandgap Fluorescent Carbon Quantum Dots for Electroluminescent Light‐Emitting Diodes (Adv. Mater. 3/2017)

Fanglong Yuan,Zhibin Wang,Xiaohong Li,Yunchao Li,Zhan'ao Tan,Louzhen Fan,Shihe Yang

DOI: https://doi.org/10.1002/adma.201770019

IF: 29.4

2017-01-01

Advanced Materials

Abstract:The first full-color electroluminescent light-emitting diodes (LEDs) that directly use bandgap-emission carbon quantum dots (CQDs) with a quantum yield up to 75% as active emission layer are fabricated by Z. A. Tan, L. Z. Fan, and co-workers, as described in article 1604436. Without using a holetransport layer, the maximum luminance of blue LEDs reached about 136 cd m−2, a record for CQD-based monochrome LEDs.
A warm-white light-emitting diode based on single-component emitter aromatic carbon nitride

Yunhu Wang,Kunpeng Wang,Fangxu Dai,Kai Zhang,Haifeng Tang,Lei Wang,Jun Xing

DOI: https://doi.org/10.1038/s41467-022-34291-9

IF: 16.6

2022-10-31

Nature Communications

Abstract:Artificial lighting consumes almost one-fifth of global electricity. As an efficient solid-state lighting technology, white light-emitting diodes (WLEDs) have received increasing attention. However, the white luminescence of the traditional WLEDs comes from multi-component emitters, which leads to complex device structure and unstable emitting color. Therefore, developing single-component materials with white-light electroluminescence is of significance for artificial lighting applications. Here, we fabricate single-component white-light electroluminescence devices based on an aromatic carbon nitride material and improve the performance of WLEDs by adjusting the carrier transport. The carbon nitride LEDs emit warm-white light, of which color coordinates and color temperature are (0.44, 0.52) and 3700 K. The optimized LEDs display a very low turn-on voltage of 3.2 V and achieve a milestone in the maximum luminance and external quantum efficiency of 1885 cd m −2 and 1.20%. Our findings demonstrate the low-cost carbon nitride materials have promising potential for single-component WLEDs application.

multidisciplinary sciences
Multicolor and Single-Component White Light-Emitting Carbon Dots from a Single Precursor for Light-Emitting Diodes

Qiurui Han,Wenjun Xu,Chunyu Ji,Gaoyang Xiong,Changsheng Shi,Dongming Zhang,Wenquan Shi,Yuxiang Jiang,Zhili Peng

DOI: https://doi.org/10.1021/acsanm.2c04130

IF: 6.14

2022-10-17

ACS Applied Nano Materials

Abstract:The preparation of multicolor and white light-emitting carbon dots (CDs) is of both significant importance and challenging for their applications as white phosphors for light-emitting diodes (LEDs). In this report, a facile reaction system that is capable of preparing both multicolor and white light-emitting CDs was disclosed. In this system, three CDs emitting yellow, red, and green lights were prepared, and monochromatic LEDs were constructed using these multicolor CDs. Most importantly, single-component white light-emitting CDs with CIE coordinates of (0.33, 0.33) were also prepared. The white light-emitting CDs were applied as single-component white phosphors for the fabrication of white LEDs. The white LEDs constructed demonstrated excellent performance, emitting warm white light (CCT = 3723 K) with CIE coordinates of (0.39, 0.37) and an extremely high color-rendering index of 91.5, which should find favorable applications for indoor illumination.

materials science, multidisciplinary,nanoscience & nanotechnology
Engineering Triangular Carbon Quantum Dots with Unprecedented Narrow Bandwidth Emission for Multicolored LEDs.

Fanglong Yuan,Ting Yuan,Laizhi Sui,Zhibin Wang,Zifan Xi,Yunchao Li,Xiaohong Li,Louzhen Fan,Zhan’ao Tan,Anmin Chen,Mingxing Jin,Shihe Yang

DOI: https://doi.org/10.1038/s41467-018-04635-5

IF: 16.6

2018-01-01

Nature Communications

Abstract:Carbon quantum dots (CQDs) have emerged as promising materials for optoelectronic applications on account of carbon’s intrinsic merits of high stability, low cost, and environment-friendliness. However, the CQDs usually give broad emission with full width at half maximum exceeding 80 nm, which fundamentally limit their display applications. Here we demonstrate multicolored narrow bandwidth emission (full width at half maximum of 30 nm) from triangular CQDs with a quantum yield up to 54–72%. Detailed structural and optical characterizations together with theoretical calculations reveal that the molecular purity and crystalline perfection of the triangular CQDs are key to the high color-purity. Moreover, multicolored light-emitting diodes based on these CQDs display good stability, high color-purity, and high-performance with maximum luminance of 1882–4762 cd m −2 and current efficiency of 1.22–5.11 cd A −1 . This work will set the stage for developing next-generation high-performance CQDs-based light-emitting diodes.
Gram‐Scale Synthesis of 41% Efficient Single‐Component White‐Light‐Emissive Carbonized Polymer Dots with Hybrid Fluorescence/Phosphorescence for White Light‐Emitting Diodes

Zifei Wang,Yang Liu,Shijie Zhen,Xiaoxi Li,Weiguang Zhang,Xun Sun,Baoyuan Xu,Xue Wang,Zhenhua Gao,Xiangeng Meng

DOI: https://doi.org/10.1002/advs.201902688

IF: 15.1

2020-01-16

Advanced Science

Abstract:<p>Fluorescent carbon dots (CDs) are compelling optical emitters to construct white light‐emitting diodes (WLEDs). However, it remains a challenge to achieve large‐scale and highly efficient single‐component white‐light‐emissive CDs suitable for WLED applications. Herein, a low cost, fast processable, environmentally friendly, and one‐step synthetic approach is developed for the preparation of gram‐scale and highly efficient single‐component white‐light‐emissive carbonized polymer dots (SW‐CPDs). It is revealed that hybrid fluorescence/phosphorescence components cooperatively contribute to the emergence of white light emission. The SW‐CPDs exhibit a record quantum yield (QY) of ≈41% for the white light emission observed in solid‐state CD systems, while the QY of the phosphorescence is ≈23% under ambient conditions. Heavy doping of N and P elements as well as presence of covalently cross‐linked polymer frameworks is suggested to account for the emergence of hybrid fluorescence/phosphorescence, which is supported by the experimental results and theoretical calculations. A WLED is fabricated by applying the SW‐CPDs on an UV‐LED chip, showing favorable white‐light‐emitting characteristics with a high luminous efficacy of 18.7 lm W<sup>−1</sup> that is comparable to that of state‐of‐the‐art WLEDs reported before.</p>

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry

Fluorescence–phosphorescence dual emissive carbon nitride quantum dots show 25% white emission efficiency enabling single-component WLEDs

White LED Based on YAG : Ce,Gd Phosphor and CdSe–ZnS Core/Shell Quantum Dots

An Efficient Green-Emitting Quantum Dot with Near-Unity Quantum Yield and Suppressed Auger Recombination for High-Performance Light-Emitting Diodes

White Light Emitting Diodes Based on Green Graphene Quantum Dots and Red Graphene Quantum Dots

53% Efficient Red Emissive Carbon Quantum Dots for High Color Rendering and Stable Warm White‐Light‐Emitting Diodes

High Color Rendering Index and Tunable Color Temperature of White Light Emitting Diodes with Yellow Emitting Graphene Quantum Dots Coated

Achieving 46% efficient white-light emissive carbon dot-based materials by enhancing phosphorescence for single-component white-light-emitting diodes

Blue and green double band luminescent carbon quantum dots: Synthesis, origin of photoluminescence, and application in white light-emitting devices

A Facile Approach to Solid-State White Emissive Carbon Dots and Their Application in UV-Excitable and Single-Component-Based White LEDs

Single-phase excitation-wavelength-independent nitrogen doped graphene quantum dots for fabrication of white light-emitting diodes (WLEDs)

White Organic Light-Emitting Diodes Based on a Yellow Phosphorescence Iridium Complex and a High-Efficiency Blue Fluorescence

Enhancing White Light-Emitting Diode Performance with Ultra-Wide Spectrum ZnS:Mn-CDs@SiO2 Dual Core@Shell Composite

Ultrabroad-band, white light emission from carbon dot-based materials with hybrid fluorescence/phosphorescence for single component white light-emitting diodes

Ultrabroad-band, Red Sufficient, Solid White Emission from Carbon Quantum Dot Aggregation for Single Component Warm White Light Emitting Diodes with a 91 High Color Rendering Index.

Recent Advances in White Light-Emitting Diodes of Carbon Quantum Dots

Highly efficient and stable white LEDs based on pure red narrow bandwidth emission triangular carbon quantum dots for wide-color gamut backlight displays

Light‐Emitting Diodes: Bright Multicolor Bandgap Fluorescent Carbon Quantum Dots for Electroluminescent Light‐Emitting Diodes (Adv. Mater. 3/2017)

A warm-white light-emitting diode based on single-component emitter aromatic carbon nitride

Multicolor and Single-Component White Light-Emitting Carbon Dots from a Single Precursor for Light-Emitting Diodes

Engineering Triangular Carbon Quantum Dots with Unprecedented Narrow Bandwidth Emission for Multicolored LEDs.

Gram‐Scale Synthesis of 41% Efficient Single‐Component White‐Light‐Emissive Carbonized Polymer Dots with Hybrid Fluorescence/Phosphorescence for White Light‐Emitting Diodes