Abstract:Drying is a very important unit operation in many industries such as food, pharmaceuticals, chemicals and ceramics. In most cases, wet materials are dried by forced convection using hot air flow. Heat and mass transfer processes during drying have been studied by both experimental and numerical simulation methods. For the purpose of studying the mechanism of heat and mass transfer and stress-strain distribution during the hot air drying of biological porous medium, two-way coupled thermo-hydro-mechanical mathematical model has been developed to simulate the hot air convective drying process of biological porous media on basis of Fickian diffusion theory, Fourier’s law of heat conduction and thermoelasticity mechanics. The following assumptions were made in order to find a solution to the hot air drying model: the biological porous medium was homogeneous and isotropic; the deformation during drying was elastic. The transient model, composed of a system of partial differential equations, was solved by finite difference methods. The computational procedure was programmed using C language. Some physical and mechanical properties of carrot changing with dry basis moisture content and temperature were considered. The numerical results were compared with available experimental data obtained during the drying of potatoes and carrots. The relative errors between numerical results and experimental data were both less than 5%, which showed the numerical results obtained using the mathematical model were in good agreement with the experimental data. Numerical simulations of the drying curve variations and the spatio-temporal distributions of moisture, temperature and drying stresses and strains of carrot were also evaluated. The temperature and moisture content showed a gradient inside carrot slice during drying. As the drying process proceeded, the temperature inside the carrot slice initially increased to reach the wet bulb temperature of the environment and eventually leveled off. The dry basis moisture content inside the carrot slice decreased, with the fastest decreased at the heat and mass transfer interface, eventually reached the equilibrium moisture content of the potato and leveling off. Both the moisture content gradient and the temperature gradient decreased gradually in the thickness direction. The normal stress was negative in all parts of the carrot slice, and the larger the closer to the evaporation interface. The shear stress was positive in all parts of the carrot slice, and the maximum shear stress occurred in the middle of the carrot slice. As in the case of the normal stress, the values of the normal strain were negative. The change trend of normal strain with time was consistent with that of moisture content. These results indicated that the observed physical deformations were caused by the dehydration of carrot slice during drying. The influence of drying conditions, such as air temperature, air velocity and the thickness of porous media on drying process was analyzed. Analysis showed that under certain drying conditions, the higher air temperature, the greater air velocity and the thinner slice thickness, the shorter drying time. This work should help in developing an understanding of the relationship between mass and heat transfer, shrinkage, stress, strains and physical degradation.

CFD simulation of heat and mass transfer through cylindrical Zizania latifolia during vacuum cooling

Experiments and numerical simulation of dynamic cool-down process of stainless steel plate in liquid nitrogen bath

Study on heat and mass transfer of sugarcane stem during vacuum pre-cooling

Evaluation, Monitoring, and Improving the Airflow and Heat Transfer in a Cold Storage of Foodstuffs, CFD Simulation and Experimental Investigation

Mass-Transfer Simulation Software Study of Sliced Porous Production During Convection Drying Process

Theoretical and Experimental Study for the Transient Behavior of a Linear Compressor During Pulse Tube Cryocooler Cool Down Process

A fully coupled multiphase model for infrared-convective drying of sweet potato

Modeling Simultaneous Heat and Mass Transfer for Microwave Drying on Apple

The simulation analysis and experiment of drying thin-layer radish strips

Numerical analysis of coupled heat and mass transfer processes in packaged tomatoes throughout the cold chain

Simulation of evaporation and sublimation process in porous plate water sublimator based on a reduced CFD model

Research Progress in Simultaneous Heat and Mass Transfer of Fruits and Vegetables During Precooling

CFD simulation of water vapour condensation in the presence of non-condensable gas in vertical cylindrical condensers

Validation and Optimization of Heat and Mass Transfer Model for Mushroom Convection Drying

Mathematical Model and Numerical Simulation of Biological Porous Medium During Hot Air Drying

Simulation Approach for Optimal Design of Vacuum Cooling on Broccoli by Simulated Annealing Technique

3-D Steady Simulation of Temperature Pattern Inside Single Plastic Greenhouse Using CFD

A novel mechanical vapor compression vacuum belt drying system: Model development, experimental verification and performance prediction

Numerical Investigation of Marangoni Effect During Precooling of Fruits and Vegetables

Computational fluid dynamics based numerical simulations of heat transfer, fluid flow and mass transfer in vacuum membrane distillation process

Characteristic Analysis of Fluctuating Liquid Film Flow Behavior and Heat Transfer in Nitrogen Condensation