Abstract:SiC foam was used as a static mixer for solvent extraction.Excellent extraction performance and high mass transfer coefficient were obtained.The structure-performance relationship between SiC foam and extraction performance was studied.The mixing process between two phases was simulated by CFD method.Extraction reactor is a major research area of interest within the field of rare earths extraction and separation. SiC foam offers excellent material characteristics as well as three-dimensional (3-D) reticulated structure; however, very little research has been carried out on its application in extraction reactor so far. In this work, a static mixer reactor based on SiC foam was designed and demonstrated to extract and separate Ce(III) and Pr(III) from nitric acid media by using 2-ethylhexyl phosphoric acid mono-2-ethylhexyl ester (P507) as extractant. The structure-performance relationship between SiC foam and extraction performance was studied by experiment combined with computational fluid dynamics (CFD) simulation. The experiment data are in good agreement with the simulation results. Contrast experiment by using Kenics Mixer was carried out, and SiC foam showed better extraction and mass transfer performance. Using optimal structural SiC foam (pore size D=2.3 mm, open porosity ε=85%, foam length L=80 mm), high extraction efficiency η (Pr(III): 94.6%, Ce(III): 88.5%) and separation factor β (2.27) between Ce(III) and Pr(III) are achieved at a high total throughput of 200 mL/min. Besides, overall volumetric mass transfer coefficient KLa of Pr(III) and Ce(III) are 0.519 and 0.378 s−1 at the residence time τ of 3.6 s, respectively, which reach the high level of microchannel reactors and are better than conventional extractors and other static mixers. SiC foam is found to be applicable as a static mixer for efficient and high-throughput extraction and separation of rare earths.Based on its 3-D reticulated structure, SiC foam is found to be applicable as a static mixer for efficient extraction of rare earths at high flow rates.<ol class="links-for-figure"><li><a class="anchor download-link u-font-sans" href="https://ars.els-cdn.com/content/image/1-s2.0-S1002072121000314-fx1_lrg.jpg">Download : Download high-res image (216KB)</a></li><li><a class="anchor download-link u-font-sans" href="https://ars.els-cdn.com/content/image/1-s2.0-S1002072121000314-fx1.jpg">Download : Download full-size image</a></li></ol>

Stoichiometry and thermodynamics of cerium(IV) solvent extraction from sulfuric acid solutions by CYANEX 301

Extraction equilibrium and thermodynamics of cesium with a new derivative of calix[4]biscrown

A novel neutral-base coupling synergistic extraction system of Cyanex923 and primary amine N1923 for the recovery of cerium(IV) and fluorine from sulfuric acid medium

Solvent Extraction of Cesium with A New Compound Calix[4]Arene-Bis[(4-Methyl-1,2-Phenylene)-Crown-6]

Predictive capability evaluation and mechanism of Ce (III) extraction using solvent extraction with Cyanex 572

Solvent extraction separation of cerium and praseodymium from hydrochloric solution with P507

Redox Assisted Solvent Extraction to Enable Highly Efficient Separation of Cerium from Other Lanthanides: Experimental Studies and DFT Calculations

STUDIES ON SYNERGISTIC EXTRACTION SYSTEMS INVOLVING ACYLPYRAZOLONES——IV. EXTRACTION OF CERIUM (III) BY ACYLPYRAZOLONES WITH SEVERAL ORGANIC CARBOXYLIC ACIDS

Coordination structures and supramolecular architectures in a cerium(III)-malonamide solvent extraction system

Extraction behavior of cesium from nitric acid medium with calix[4]- bis [(4- tert -butyl-1,2-phenylene)-crown-6]

A novel extractant 2-Ethylhexyl Bis(2-ethylhexyl)phosphinate for cerium(IV) and fluorine extraction from nitric acid system

The synergistic extraction of thorium(IV) and uranium(VI) with mixtures of 3-phenyl-4-benzoyl-5-isoxazolone and crown ethers

Solvent Extraction of Lanthanum and Cerium Ions from Hydrochloric Acidic Aqueous Solutions Using Partly Saponified 2-Ethylhexyl Phosphonic Acid Mono-2-ethylhexyl Ester

THERMODYNAMICS OF SOLVENT EXTRACTION OF METALS(V) EHEHPA-CoSO4 System

Solvent extraction of Ce(III) and Pr(III) with P507 using SiC foam as a static mixer

THERMODYNAMICS OF SOLVENT EXTRACTION OF METALS (VII) EHEHPA-CoSO4-CuSO4 System

Kinetics of cerium(IV) extraction with DEHEHP from HNO3-HF medium using a constant interfacial cell with laminar flow

Solvent Effect on Mineral Modification: Selective Synthesis of Cerium Compounds by a Facile Solution Route

Synergistic extraction and separation of thorium from rare earths in chloride media using mixture of Cextrant 230 and Cyanex 923

Solvent extraction of lanthanides and yttrium from nitrate medium with CYANEX 925 in heptane