Abstract:Silicon carbide ceramics are important engineering materials, but their application is limited by the inherent brittleness. Two-dimensional graphene, with its excellent properties, can be used as a second phase to improve the performance of silicon carbide ceramics. However, due to poor dispersion of graphene in the ceramic matrix, it is a challenge to fully exploit the modifying effect of graphene in composite materials. To address these challenges, SiC-based ceramic materials incorporating graphene nanosheets (GNPs) were synthesized using ceramic organic precursor polycarbosilane and industrial expandable graphite as starting materials. The precursor intercalation technique was employed to fabricate SiC/GNPs ceramic composites with GNPs volume fraction of 1%, 3%, and 5%. The GNPs were uniformly arranged in an array-like parallel fashion in the SiC ceramic matrix, showing excellent orientation. With the GNPs content increasing, the spacing between GNPs within the array decreased, indicating tunable microstructural topology. The addition of GNPs greatly enhanced the fracture toughness of SiC ceramics. When the GNPs content was 3%, the relative density of the samples reached 98.5%, the bending strength reached 445 MPa, and the fracture toughness (KIC value) peaked at 5.67 MPa center dot m(1/2), surpassing pure SiC ceramics by 40%, which was primarily attributed to crack deflection and bridging induced by the GNPs. However, further increase in GNPs content led to a decrease in fracture toughness to 4.37 MPa center dot m(1/2). These SiC-based ceramic composites with a graphene array have potential application in design and development of novel "structure-function integration" SiC-based ceramic devices.

Recent progress in ceramic matrix composites reinforced with graphene nanoplatelets

Improved fracture resistance and toughening mechanisms of GNPs reinforced ceramic composites

Graphene reinforced metal and ceramic matrix composites: a review

SiC-based Ceramic Materials Incorporating GNPs Array:Preparation and Mechanical Characterization

Evolution from microfibers to nanofibers toward next-generation ceramic matrix composites: A review

Controllable fabrication and multifunctional applications of graphene/ceramic composites

Research progress on preparation technology of graphene-reinforced aluminum matrix composites

Preferentially oriented SiC/graphene composites for enhanced mechanical and thermal properties

Recent Advances on Carbon Nanotubes and Graphene Reinforced Ceramics Nanocomposites

Comprehensive performance regulation of Cu matrix composites with graphene nanoplatelets in situ encapsulated Al2O3 nanoparticles as reinforcement

10 years of research on toughness enhancement of structural ceramics by graphene

Effect of Carbide Interlayers on the Microstructure and Properties of Graphene-Nanoplatelet-reinforced Copper Matrix Composites

Molecular dynamics simulation and experimental study on mechanical properties and microstructure of cement-based composites enhanced by graphene oxide and graphene

Mechanisms of simultaneously enhanced mechanical and tribological properties of carbon fabrics/phenolic resin composites reinforced with graphite nanoplatelets

Research on the interface properties and strengthening–toughening mechanism of nanocarbon-toughened ceramic matrix composites

Fibre-reinforced multifunctional SiC matrix composite materials

An Overview of Metal Matrix Nanocomposites Reinforced with Graphene Nanoplatelets; Mechanical, Electrical and Thermophysical Properties

From the research state of the thermal properties of graphene reinforced ceramics to the future of computer simulation

Fabrication and mechanical properties of Al2O3–TiC ceramic composites synergistically reinforced with multi-walled carbon nanotubes and graphene nanoplates

Mechanical and tribological properties of graphene nanoplatelets-reinforced titanium composites fabricated by powder metallurgy

Enhancing the Strengthening Effect of Graphene-Nanoplates in Al Matrix Composites by Heterogeneous Matrix Design