Abstract:Lattice structures are bio-inspired designs made up of repeated unit cells consisting of beams, surfaces, or plates that fit together in an ordered or stochastic fashion. These unit cells are configured according to their size and shape in three dimensions. Simple lattices can be created using standard manufacturing techniques such as computer numerical control machining, welding, and casting. Additive manufacturing enables customers to make complex structures with small features at a reasonable cost. In the present work, using octagon, hexagrid, and rhombic dodecahedron lattice topologies, characterized by unit cell size from 3 × 3 × 3 to 7 × 7 × 7 mm and strut thickness from 0.5 to 1.5 mm, the structural behavior of a solid cylindrical model made of polylactic acid material under compression is analyzed. Finite element analysis (FEA) through Autodesk® Netfabb® solvers was used to assess lattice structure mechanical and structural properties. The results were validated by physical compression testing on additively manufactured samples. Cellular designs with 3 × 3 × 3 mm unit cells and 1.5 mm strut thickness displayed the lowest Von Mises stress and deformation. For different topologies, lowest results were rhombic dodecahedron (stress through FEA as 61.3108 MPa and stress through physical test as 61.05 MPa, deformation through FEA as 0.49921 mm and deformation through physical test as 0.48 mm), octagon (stress through FEA as 77.4147 MPa and stress through physical test as 76.92 MPa, deformation through FEA as 0.53316 mm and deformation through physical test as 0.51 mm), and for hexagrid (stress through FEA as 62.2911 MPa, stress through physical test as 62.15 MPa, deformation through FEA as 0.81997 mm and deformation through physical test as 0.81 mm). The percentage error between the stress through FEA and stress through physical test for octagon, hexagrid, and rhombic dodecahedron lattice topology was found out to be 0.63, 0.22, and 0.43%, respectively. Corresponding percentage deformation error between deformation through FEA and deformation through physical test was also found out to be 4.343, 2.435, and 3.848%, respectively. In addition, the impacts of volume reduction, surface area of the lattice, and relative density were explored pertaining to the structural behavior of the lattice. As a result of the examination into mechanical qualities based on these criteria, rhombic dodecahedron lattice topology with 3 × 3 × 3 mm unit cell size and strut thickness of 1.5 mm was found to be a better choice than octagon and hexagrid lattice topologies for 3D printing components that were loaded under axially compressive loads.

Review on characterization and impacts of the lattice structure in additive manufacturing

Influence of post-processing on additively manufactured lattice structures

Additive manufacturing (3D printing): A review of materials, methods, applications and challenges

Considerations for the Variable Density Lattice Structure of Additive Manufacturing: A Review

Development of lattice structure with selective laser melting process: A state of the art on properties, future trends and challenges

A comprehensive review of emerging additive manufacturing (3D printing technology): Methods, materials, applications, challenges, trends and future potential

A review on recent advancements in additive manufacturing techniques

Additive Manufacturing: A Comprehensive Review

Advancements and challenges in additive manufacturing: a comprehensive review

Additive manufacturing of metallic lattice structures: Unconstrained design, accurate fabrication, fascinated performances, and challenges

Experimental and numerical investigation of PLA based different lattice topologies and unit cell configurations for additive manufacturing

A review on 3D printing: An additive manufacturing technology

A state-of-the-art review on types, design, optimization, and additive manufacturing of cellular structures

Additive Manufacturing-Enabled Advanced Design and Process Strategies for Multi-Functional Lattice Structures

Recent progress on the additive manufacturing of aluminum alloys and aluminum matrix composites: Microstructure, properties, and applications

Design of lattice structure for additive manufacturing in CAD environment

Mechanical properties of additively manufactured polymeric composites using sheet lamination technique and fused deposition modeling: A review

A Review on Additive Manufacturing for Aerospace Application

Recent Progress on 3D Printing of Lightweight Metal Thin‐Walled Structures

Additive manufacturing: A review on 3 D printing of metals and study of residual stress, buckling load capacity of strut members

Use of additive manufacturing for the fabrication of cellular and lattice materials: a review