Abstract:The mechanism of using graphene oxide as a two-dimensional filler to increase the path length of the corrosive medium to the metal surface is limited to improving the corrosion resistance of the coating. This study propose novel dispersion and in-situ crosslinking reaction mechanism for constructing water-based heavy-duty anticorrosive coatings by using graphene oxide (GO) and waterborne epoxy resin (WEP). The results showed that GO can be uniformly dispersed directly into WEP without complex functional modifications. Oxygen-containing functional groups on moleculars structure of GO&WEP co-polymerized with diethylenetriamine (DETA) forming a continuous phase film which improved the density of the coating. Characterization techniques such as Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), thermal conductivity measurement instrument, pencil hardness tester, adhesion tester, salt spray corrosion test chamber, and electrochemical impedance spectroscopy (EIS) were used to evaluate coating structure and performance properties. The results showed that graphene characteristics enhanced physical properties and anti-corrosion performance of composite coatings. The construction mechanism of the coating is different from that of the current GO modified and dispersed in the coating as a two-dimensional filler to extend the path length of the corrosive medium to the metal surface. The coatings prepared by adding the optimum mass ratio of 0.1–0.2 % GO to WEP have the best physical properties and anti-corrosion properties. When the GO content is 0.2 wt%, the thermal conductivity increases by 86.0 %. After added 0.025 wt% GO, the coating hardness is increased by two grades directly from 2B to HB. With the addition of GO concentration increased to 0.05 wt%, the adhesion is increased from 2 to level 1.When the GO content exceeds 0.05 %, the coating will not bulge off after 4 months of salt water immersion experiment.

Polydopamine functionalized graphene oxide nanocomposites reinforced the corrosion protection and adhesion properties of waterborne polyurethane coatings

Polydopamine functional reduced graphene oxide for enhanced mechanical and electrical properties of waterborne polyurethane nanocomposites

Anti-corrosion reinforcement of waterborne polyurethane coating with polymerized graphene oxide by the one-pot method

Design on the Corrosion Protection of Eco-Friendly and Multifunctional Polyhedral Oligomeric Silsesquioxane Functionalized Graphene Oxide Reinforced Waterborne Polyurethane

Eco-Friendly Waterborne Polyurethane Coating Modified with Ethylenediamine-Functionalized Graphene Oxide for Enhanced Anticorrosion Performance

Enhanced Mechanical Property, Chemical Resistance and Abrasion Durability of Waterborne Polyurethane Based Coating by Incorporating Highly Dispersed Polyacrylic Acid Modified Graphene Oxide

Interpenetrating Network Structure Design and Corrosion Resistance of High‐performance Waterborne Polyurethane Coating Modified by Epoxy Resin and Functionalized Graphene Oxide

Interfacial assembled mesoporous polydopamine nanoparticles reduced graphene oxide for high performance of waterborne epoxy-based anticorrosive coatings

Synthesis of Silane Functionalized Graphene Oxide and Its Application in Anti-Corrosion Waterborne Polyurethane Composite Coatings

In-situ polymerization of eco-friendly waterborne polyurethane/polydopamine-coated graphene oxide composites towards enhanced mechanical properties and UV resistance

The synergistic effect of polyvinyl alcohol and graphene oxide on the corrosion resistance of waterborne coatings

Aluminum dihydric tripolyphosphate/polypyrrole-functionalized graphene oxide waterborne epoxy composite coatings for impermeability and corrosion protection performance of metals

Preparation of Graphene Oxide-Based Polyaniline Composites with Synergistic Anticorrosion Effect for Waterborne Polyurethane Anticorrosive Coatings

Wrinkled p-phenylenediamine grafted graphene oxide as reinforcement for polyvinyl butyral anti-corrosive coating

Preparation and Anticorrosive Performance of Waterborne Epoxy Resin Composite Coating with Amino-Modified Graphene Oxide

Preparation and properties of UV-curable waterborne graphene oxide/polyurethaneacrylate composites

Modification of Graphene Oxide with Acrylate Phosphorus Monomer Via Thiol-Michael Addition Click Reaction to Enhance the Anti-Corrosive Performance of Waterborne Epoxy Coatings

In-situ crosslinking reaction of graphene oxide & waterborne epoxy resin to construct continuous phase anticorrosive coating

Superior Anti-Corrosion and Self-Healing Bi-Functional Polymer Composite Coatings with Polydopamine Modified Mesoporous Silica/graphene Oxide

Effect of silica‐loaded polydopamine‐modified graphene oxide nanocomposites on the corrosion resistance of polyester coatings

Organic/inorganic Hybrid Waterborne Polyurethane Coatings with Self-Healing Properties for Anticorrosion Application