Abstract:This study focuses on optimizing the thermal, morphological, scratch resistance, and anti-barrier characteristics of newly developed hybrid sol-gel coatings. The coatings were formulated by varying the synthetic precursors and incorporating a clay additive. The hybrid coatings were prepared using a mixture of organosilane and zirconium propoxide precursors, and further modified with polydimethylsiloxane (PDMS) and Cloisite 20 A (C20A) clay additives. The coatings were applied onto mild steel substrates and their corrosion protection in 3.5 wt% NaCl solutions were evaluated through electrochemical and visual observation testing. Contact angle measurements revealed a hydrophobic nature of the developed coatings on the steel surfaces, primarily attributed to the presence of an organosilane precursor with a long C18-alkyl chain functionality in all formulations. Electrochemical testing data demonstrated that the coating formulation containing the polydimethylsiloxane precursor exhibited good corrosion protection. After 14 days of immersion in a saline medium, this sample exhibited impedance values higher than 10 6 Ω.cm 2 and a low corrosion rate of 3.5 × 10 −3 mpy, as determined by electrochemical impedance spectroscopy (EIS) and polarization testing, respectively. Morphological analyzes confirmed the homogeneous and integrated coating layer of this sample, which contributed to its enhanced corrosion protection. Furthermore, the inclusion of the Zr-propoxide precursor in a formulation containing only silane precursors demonstrated favorable effects on the desired coating properties. The hybrid sol-gel coatings exhibited excellent anti-barrier characteristics, which can be attributed to the formation of highly cross-linked Si-O-Si networks. Overall, the reported hybrid coating formulations offer promising alternatives to commercially available toxic conversion coatings, as they exhibit excellent anti-barrier properties and can be considered environmentally friendly.

Hydrophobic, organic–inorganic hybrid sol–gel coatings containing boehmite nanoparticles for metal corrosion protection

Hydrophobic Al2O3/SiO2/PDMS Composite Coatings for Anti-corrosion Application of 304 Stainless-Steel

Hybrid epoxy-SiO2/GO nanosheets anti-corrosive coating for aeronautic aluminum Al6061-T5

Hybrid sol–gel coatings based on GPTMS/TEOS containing colloidal SiO2 and cerium nitrate for increasing corrosion protection of aluminium alloy 7075-T6

Synthesis and characterization of corrosion resistance and hydrophobic fluorine-based coating via sol–gel process

Hybrid nanocomposite coating by sol–gel method: a review

Effect of hydrophobicity in hybrid sol-gel coating for enhanced barrier property on mild steel

Silica nanoparticles enhanced polysiloxane-modified nickel-based coatings on Mg alloy for robust superhydrophobicity and high corrosion resistance

Robust Superhydrophobic SiO2/polydimethylsiloxane Films Coated on Mild Steel for Corrosion Protection

Mesoporous Silica Nanoparticles for Active Corrosion Protection

Hybrid Sol-Gel Coatings Doped with Non-Toxic Corrosion Inhibitors for Corrosion Protection on AZ61 Magnesium Alloy

Hydrophobic Coatings on Aluminum Substrate Based on Different Metal Oxides: Co3O4, ZnO, and MgO

Trilaminar Structure Hydrophobic Graphene Oxide Decorated Organosilane Composite Coatings for Corrosion Protection

Design of Corrosion Protective and Antistatic Hybrid Sol-Gel Coatings on 6XXX AlMgSi Alloys for Aerospace Application

Robust, hydrophobic anti-corrosion coating prepared by PDMS modified epoxy composite with graphite nanoplatelets/nano-silica hybrid nanofillers

Synthesis of hybrid organosilicon materials of various chemistries as efficient protective coatings for mild steels in NaCl media

HD-SiO2/SiO2 Sol@PDMS Superhydrophobic Coating with Good Durability and Anti-Corrosion for Protection of Al Sheets

Hybrid organophosphonic-silane coating for corrosion protection of magnesium alloy AZ91: The influence of acid and alkali pre-treatments

Preparation and characterization of anticorrosion Ormosil sol–gel coatings for aluminum alloy

Synthesis of Zinc Oxide Nanomaterials via Sol-Gel Process with Anti-Corrosive Effect for Cu, Al and Zn Metallic Substrates

Corrosion resistance properties of organic–inorganic hybrid coatings on 2024 aluminum alloy