Abstract:The layered double hydroxide (LDH) of FeMgAl and its composite with the rice husk biochar (FeMgAl/RHB) was tried for the first time for removing heavy metal ions of lead (Pb 2+ ) and cadmium (Cd 2+ ) in batch tests. Scanning electron microscopy and Fourier transform infrared spectroscopy demonstrated that FeMgAl/LDH was successfully synthesized and integrated into RHB. Furthermore, the presence of Cd 2+ and Pb 2+ was confirmed by energy‐dispersive X‐ray spectroscopy, exhibiting an effective adsorption process. The equilibrium contact time was estimated at 15 and 60 min, for Pb 2+ and Cd 2+ , respectively, with high removal efficiencies and adsorption capacities upon immediate contact. Within the observed range (0–100 mg·L −1 ) of initial metal concentrations, the removal efficiencies decreased constantly using both adsorbents, while 50 or 60 mg·L −1 of Pb 2+ and Cd 2+ , respectively, was estimated as the optimum values due to a steady increase in the adsorption capacities with composite adsorbent presenting a better efficiency, twice of the metal uptake capacity compared with FeMgAl/LDH. The lowest used amount of each adsorbent (0.05 g) exhibited highest adsorption capacity which decreased with increasing amount of adsorbent (up to 0.8 g), whereas the removal efficiencies increased for both heavy metal ions. A solution of pH value 0.7–0.8 was estimated as an optimum value with a uniform increasing pattern of adsorption capacities and percentage removal of both heavy metal ions using the FeMgAl/LDH as well as the composite adsorbent. A perfect fitting of the adsorption data was seen using the pseudo‐second‐order kinetic model, suggesting the chemical sorption to be the control mechanism of adsorption. The fitting of the Langmuir and Temkin isotherm models proposed a monolayer as well as heterogeneous adsorption system. The same was further confirmed based on the reasonable fit of both (Sips and Redlich–Peterson) three‐parameter isotherms in addition to a physical adsorption system, as suggested by the Dubinin–Radushkevich isotherm model.

Evaluation of caffeine adsorption by MgAl-LDH/biochar composite

Biochar from coffee husks: a green electrode modifier for sensitive determination of heavy metal ions

CuAl LDH/Rice Husk Biochar Composite for Enhanced Adsorptive Removal of Cationic Dye from Aqueous Solution

Post-calcination as an effective approach to enhance adsorption of arsenic and antimony anions by Mg/Al layered double hydroxide-decorated spent coffee ground biochars: Role of charge properties and active sites

Evaluation and Simulation of the Adsorption Capacity of Octocrylene Sunscreen on Commercial Carbon and Biochar from Spent Coffee Beans

Fabrication of Biochar Materials from Biowaste Coffee Grounds and Assessment of Its Adsorbent Efficiency for Remediation of Water-Soluble Pharmaceuticals

Comparative Adsorptive Removal of Phosphate and Nitrate from Wastewater Using Biochar-MgAl LDH Nanocomposites: Coexisting Anions Effect and Mechanistic Studies

Adsorption of Cadmium, Manganese and Lead Ions from Aqueous Solutions Using Spent Coffee Grounds and Biochar Produced by Its Pyrolysis in the Fluidized Bed Reactor

Adsorption Parameters Optimization of Spent Coffee Ground Biochar for Methylene Blue Removal Using Response Surface Methodology

Insights on Ball Milling Enhanced Iron Magnesium Layered Double Oxides Bagasse Biochar Composite for Ciprofloxacin Adsorptive Removal from Water.

Synthesis of Copper Supported on Natural Rubber-derived Mesoporous Carbon/Silica Composite for Efficient Adsorption of Caffeine

Adsorptive Performance of Congo Red using Copper-Aluminum LDHs Load to Rice Husk Biochar

Enhanced Performance of the Composite of FeMgAl‐Layered Double Hydroxide and Rice Husk Biochar to Adsorb Heavy Metal Ions of Lead and Cadmium in Aqueous Solutions

ZnAl/LDH@CQD: Synthesis, Characterization and Use as Adsorbent

The efficient removal of ibuprofen, caffeine, and bisphenol A using engineered egusi seed shells biochar: adsorption kinetics, equilibrium, thermodynamics, and mechanism

Biochar Pyrolyzed from MgAl-layered Double Hydroxides Pre-Coated Ramie Biomass (boehmeria Nivea (L.) Gaud.): Characterization and Application for Crystal Violet Removal.

Ca/Al and Mg/Al LDH Supported on Biochars As Effective Adsorbent and Highly Regeneration Ability for Phenol Removal from Aqueous Solution

Adsorption of cadmium and copper using biochar obtained from the residue of the second-generation ethanol production: kinetics and equilibrium study

Competitive adsorption of heavy metals in a quaternary solution by sugarcane bagasse – LDPE hybrid biochar: equilibrium isotherm and kinetics modelling

Removal of Pb2+ from Aqueous Solution Using an MgO Nano-Hybridized Magnetic Biochar from Spent Coffee Grounds

The challenging removal of emerging pollutants: electrochemical regeneration to recover the adsorption capacity of a caffeine-saturated activated carbon