Visual Support for Heavy-Oil Emulsification and its Stability for Cold-Production using Chemical and Nano-Particles

Jungin Lee,Jingjing Huang,Tayfun Babadagli

DOI: https://doi.org/10.2118/196023-ms

2019-09-23

Abstract:Abstract The performance of non-thermal, cold, heavy oil production methods, such as waterflooding or gas injection (foamy oil) applications, is predominantly limited. As an alternative, efficient chemical flooding has been recommended and tested around the world (mainly in Canada and China). Cost aside, the main issue with this application is the compatibility of the chemicals used in terms of rock type, salinity, temperature, and emulsion generation and stability. Low-cost materials with strong emulsion stability capability have been tested previously in our research group. As an ongoing part of our past studies on the extensive chemical flooding applications in enhanced heavy oil recovery, we visualize directional motion, patterns, and deformation of fingers observed in Hele-Shaw cells with different oil types (heavy oil of 13,850 cP at 21°C from western Canada, heavy mineral oil of 649.9 cP at 20°C. Macroscopic and microscopic visualizations allow us to gain insights into important and fundamental physical flow mechanisms such as the Saffman-Taylor instabilities due to the viscosity ratio, and the Marangoni effect due to the surface tension gradient, wetting, dewetting, and superspreading behaviors. Hele-Shaw visualization studies in the past have mainly focused on weakening or eliminating the fingering instabilities. In this study, we attempt to categorize the observed finger types which appear during the displacement, identify the finger types responsible for heavy oil-in-water emulsification, and relate the visualization results to final enhanced heavy oil recovery. We observe both miscible and immiscible flow behavior and in the case of immiscible flow, and we investigate the impact of the capillary number on finger growth and ramification patterns by manipulating the flow rates. There are a plethora of factors that may impact the visualization of heavy-oil emulsification including the fixed chemical properties, chemical compatibility, heterogeneous (or non-heterogeneous) chemical reaction, capillary number effect, mobility ratio, IFT gradient, chemical concentration, liquid-substrate wettability, pH of liquids, precipitation, and brine conditions. To investigate such impact, we investigated a large series of in-situ heavy oil-in-water emulsifications at various conditions using emulsifiers such as anionic surfactants, cationic surfactants, and NaOH. And for the stabilization of the emulsions formed with the emulsifiers, we tested nanofluids (silica, cellulose nanocrystal, zirconia, alumina) and polymer (Xanthan Gum and an anionic polyacrylamide-based polymer). The results displayed that there exist finger types which are responsible for stable Winsor type 4 heavy oil-in-water emulsification. By the method of controlling the infrastructure of emulsion droplets and correlating observed multiple finger interactions to the material designs, we enable the selection of both novel and cost-effective designs for heavy oil recovery as well as displacement mechanisms.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to improve the cold recovery rate in non - thermal heavy - oil recovery methods. Specifically, the paper focuses on achieving heavy - oil emulsification and its stability through the application of chemicals and nanoparticles, thereby improving the heavy - oil recovery efficiency under cold - production conditions. The paper experimentally studied the emulsification process between heavy oil and water under different conditions, as well as the viscous fingering instabilities that occur during this process, and attempted to classify the observed fingering types, identify the fingering types that lead to heavy - oil - water emulsification, and relate them to the final heavy - oil recovery effect.

### Summary of the Main Problems in the Paper:

1. **Improving the Cold Recovery Rate of Heavy Oil**: The paper explored how to improve the recovery rate of heavy oil under non - thermal conditions through chemical and nanotechnology means.
2. **Optimization of Emulsification Stability**: Studied the use of low - cost materials and chemicals to enhance the stability of heavy - oil - water emulsification.
3. **Classification and Influence of Fingering Instability**: Through visualization experiments, classified the fingering instability phenomena under different conditions and analyzed the influence of these phenomena on heavy - oil emulsification and final recovery.
4. **Compatibility of Chemicals**: Studied the compatibility of chemicals under different rock types, salinity, temperature, etc., and the influence of these factors on emulsification and stability.

### Key Research Contents:

- **Experimental Design**: Used Hele - Shaw cells for macroscopic and microscopic visualization experiments to observe the flow behavior of different types of heavy oil under the action of chemicals and nanoparticles.
- **Fluid Systems**: Studied multiple fluid systems, including miscible, partially miscible, and immiscible fluids, to understand the fingering instability phenomena under different conditions.
- **Selection of Chemicals**: Tested multiple surfactants, nanofluids, and polymers to evaluate their performance in heavy - oil emulsification and stability.
- **Analysis of Physical Mechanisms**: Through experimental data, analyzed the influence of physical mechanisms such as Saffman - Taylor instability and Marangoni effect on heavy - oil emulsification.

### Main Objectives:

- **Identifying Key Fingering Types**: Determine which fingering types are most effective for heavy - oil - water emulsification and explore their contribution to the final heavy - oil recovery.
- **Optimizing Chemical Formulations**: Select new and cost - effective chemicals to improve the stability and efficiency of heavy - oil emulsification.
- **Providing Theoretical Support**: Through experimental results, provide theoretical and technical support for non - thermal heavy - oil recovery methods and promote the development of practical applications.

In summary, this paper aims to provide scientific basis and technical solutions for improving the yield of non - thermal heavy - oil recovery through in - depth study of the physical and chemical mechanisms in the heavy - oil emulsification process.