Abstract:Recently, the phase field method has been increasingly used for brittle fractures in soft materials like polymers, elastomers, and biological tissues. When considering finite deformations to account for the highly deformable nature of soft materials, the convergence of the phase-field method becomes challenging, especially in scenarios of unstable crack growth. To overcome these numerical difficulties, several approaches have been introduced, with artificial viscosity being among the most widely utilized. This study investigates the energy release rate due to crack propagation in hyperelastic nearly-incompressible materials and compares the phase-field method and a novel gradient-enhanced damage (GED) approach. First, we simulate unstable loading scenarios using the phase-field method, which leads to convergence problems. To address these issues, we introduce artificial viscosity to stabilize the problem and analyze its impact on the energy release rate utilizing a domain J-integral approach giving quantitative measurements during crack propagation. It is observed that the measured energy released rate during crack propagation does not comply with the imposed critical energy release rate, and shows non-monotonic behavior. In the second part of the paper, we introduce a novel stretch-based GED model as an alternative to the phase-field method for modeling crack evolution in elastomers. It is demonstrated that in this method, the energy release rate can be obtained as an output of the simulation rather than as an input which could be useful in the exploration of rate-dependent responses, as one could directly impose chain-level criteria for damage initiation. We show that while this novel approach provides reasonable results for fracture simulations, it still suffers from some numerical issues that strain-based GED formulations are known to be susceptible to.

Fracture simulation of viscoelastic polymers by the phase-field method

A Finite-Volume Implementation of the Phase-Field Model for Brittle Fracture with Adaptive Mesh Refinement

Viscoelastic phase-field fracture using the framework of representative crack elements

Dynamic fracture investigation of concrete by a rate-dependent explicit phase field model integrating viscoelasticity and micro-viscosity

A Phase-Field Framework for Modeling Multiple Cohesive Fracture Behaviors in Laminated Composite Materials

Evaluating fracture energy predictions using phase-field and gradient-enhanced damage models for elastomers

A multiscale phase field fracture approach based on the non-affine microsphere model for rubber-like materials

An efficient phase-field model for fatigue fracture in viscoelastic solids using cyclic load decomposition and damage superposition

Variational Approach to Viscoelastic Fracture : Comparison of a phase-field and of a lip-field approach

Cyclic viscoelastic-viscoplastic behavior of epoxy nanocomposites under hygrothermal conditions: A phase-field fracture model

Rate-dependent phase field fracture simulation in polymers with adaptive mixed isogeometric approach

Micromechanically motivated finite-strain phase-field fracture model to investigate damage in crosslinked elastomers

A hybrid phase-field method for modeling mixed-mode fractures in elastoplastic rock-like materials

A phase field model for cohesive fracture in micropolar continua

A phase-field model for fracture in biological tissues

A material energy–momentum flux-driven phase field fracture mechanics model

Phase field modeling of dynamic fracture in elastoplastic composites with interfacial debonding

A Study on Phase-Field Models for Brittle Fracture

A phase-field modeling approach of fracture propagation in poroelastic media

On the energy decomposition in variational phase-field models for brittle fracture under multi-axial stress states

Phase field modeling of crack propagation under combined shear and tensile loading with hybrid formulation