Abstract:P2-type Na0.67 Ni0.33 Mn0.67 O2 is a dominant cathode material for sodium-ion batteries due to its high theoretical capacity and energy density. However, charging P2-type Na0.67 Ni0.33 Mn0.67 O2 to voltages higher than 4.2 V (vs. Na+ /Na) can induce detrimental structural transformation and severe capacity fading. Herein, stable cycling and moisture resistancy of Na0.67 Ni0.33 Mn0.67 O2 at 4.35 V (vs. Na+ /Na) are achieved through dual-site doping with Cu ion at transition metal site (2a) and unusual Zn ion at Na site (2d) for the first time. The Cu ion doping in 2a site stabilizes the metal layer, while more importantly, the unusual alkali-metal site doping by Zn ion serves as O2- Zn2+ O2- "pillar" for enhancing electrostatic cohesion between two adjacent transition metal layers, preventing the crack of active material along the a-b-plane and restraining the generation of O2 phase upon deep desodiation. This unique dual-site-doped [Na0.67 Zn0.05 ]Ni0.18 Cu0.1 Mn0.67 O2 cathode exhibits a prominent cyclability with 80.6% capacity retention over 2000 cycles at an ultrahigh rate of 10C, demonstrating its great potential for practical applications. Impressively, the full cell devices with [Na0.67 Zn0.05 ]Ni0.18 Cu0.1 Mn0.67 O2 and commercial hard carbon as cathode and anode, respectively, can deliver a high energy density of 217.9 Wh kg-1 and excellent cycle life over 1000 cycles.

Dopant Segregation Boosting High‐Voltage Cyclability of Layered Cathode for Sodium Ion Batteries

La-doped O3-type Layered Oxide Cathode with Enhanced Cycle Stability for Sodium-Ion Batteries

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Designing Water/air-Stable P2-layered Cathodes with Delayed P2–O2 Phase Transition by Composition and Structure Engineering for Sodium-Ion Batteries at High Voltage

Realizing High-Capacity and Low-Strain Manganese-Based Sodium Cathode by Regulating the Doping Sites of Mg with a Post-Doping Approach

Enhancing Structure Stability by Mg/Cr Co‐Doped for High‐Voltage Sodium‐Ion Batteries

Degradation analysis and doping modification optimization for high-voltage P-type layered cathode in sodium-ion batteries

Constructing a Composite Structure by a Gradient Mg 2+ Doping Strategy for High-Performance Sodium-Ion Batteries

Mitigating Jahn–Teller Effect in Layered Cathode Material Via Interstitial Doping for High‐Performance Sodium‐Ion Batteries

A Customized Strategy Realizes Stable Cycle of Large‐Capacity and High‐Voltage Layered Cathode for Sodium‐Ion Batteries

Dielectric polarization in MgFe2O4 coating and bulk doping to enhance high-voltage cycling stability of Na2/3Ni1/3Mn2/3O2 cathode material

Unraveling the Synergistic Effect of Mg and Ti Codoping to Realize an Ordered Structure and Excellent Performance for Sodium-Ion Batteries

Ultralow‐Strain Zn‐Substituted Layered Oxide Cathode with Suppressed P2–O2 Transition for Stable Sodium Ion Storage

Electrochemical in Situ Na Doping to Construct High-Performance Lithium-Rich Cathode

Unusual Site‐Selective Doping in Layered Cathode Strengthens Electrostatic Cohesion of Alkali‐Metal Layer for Practicable Sodium‐Ion Full Cell

Improving High-Voltage Cycling Stability and High-Rate Capability of Sodium-Ion Layered Cathode Oxides through Trace Amounts of Low-Valence Metals

Insight into effects of divalent cation substitution stabilizing P2-Type layered cathode materials for sodium-ion batteries

Achieving a Deeply Desodiated Stabilized Cathode Material by the High Entropy Strategy for Sodium‐ion Batteries

Bi-Doped P2 Layered Sodium-Ion Battery Cathode with Improved Cycling Stability

Development of lithium-free P2-type high-sodium content cathode materials with enhanced cycle and air stability for sodium-ion batteries

Improving the Performance of Layered Oxide Cathode Materials with Football-Like Hierarchical Structure for Na-Ion Batteries by Incorporating Mg 2+ into Vacancies in Na-Ion Layers.