Abstract:Carbon nanotubes (CNTs) have excellent mechanical properties and outstanding aspect ratios, which could remarkably impact the concrete's properties. This research investigates the influence of four different aspect ratios of CNTs with two dosages (i.e., 0.09% and 0.15%, by weight of cement) on hydration, macro performance, and microstructure of low-carbon sulfoaluminate cement-based composite. The experimental results show that adding different aspect ratios of CNTs can enhance the macro performance of the composite. The SM2 (short-CNTs with 0.15% content) group with a small aspect ratio (50–100) has better flexural strength and compressive strength than M0 (plain group), which is increased by 32.7% and 37.0%, respectively, the hydration degree of C 4 A 3 Š (ye'elimite) and C 2 S (belit) are increased by 19.9% and 57.3% than that of the M0 group. At low dosages (0.09%), LM1 (long-CNTs with an aspect ration of 250–1500) and LM2 (long-CNTs with an aspect ration of 125–750) improved the flexural strength of UHPC more than SM1 (short-CNTs with an aspect ration of 100–200). However, LM1 (long-CNTs with a large aspect ratio of 250–1500) has a better enhancement at a dosage of 0.09% than 0.15%. CNTs mainly accelerated the hydration process of the matrix and promoted the generation of more AFt, AH 3 . AFt is a needle-like fiber, and the increase in content is beneficial to improve the toughness and flexural strength of the matrix. The increase in AH 3 content can improve the compressive strength of the matrix. The AH 3 phase can be filled into the pores of the matrix, thereby increasing the compatibility of the matrix and improving the pore structure. The increase in the content of the two hydration products can synergistically enhance the mechanical properties of the matrix. AH 3 is closely connected to CNTs, which can improve the bond strength between the matrix and CNTs. It is observed that AFt is closely associated with AH 3 , filling the pores of the matrix, and the nanoscale AFt, AH 3 , and CNTs work together to improve the strength of the matrix, which differs from the effect of CNTs in OPC. This research prepares UHPC from low-carbon cement, which effectively enhances the life cycle of concrete materials and provides a new idea for reducing carbon emissions.

Effect of hydrotalcite-like compounds with high specific surface area on mechanical properties and carbonation resistance of cementitious composites

Early-age carbonation mitigation of SSC by CxS minerals: Mechanism and Performances

Microstructure Refinement of Calcium-Sulfate-aluminate and Portland Cement (CSA-PC) Hybrids with Accelerated CO2 Curing (ACC)

Enhanced Carbonation Curing of Cement Pastes with Dolomite Additive

Effect of surface water on wollastonite carbonation: Activated dissolution and mass transfer

Influences of titanium dioxide nanoparticles on regulation of crystalline growth and early carbonation of cementitious composites

Characteristics of CSH under carbonation and its effects on the hydration and microstructure of cement paste

A novel ultrasonic method to exfoliate CLDH toward improving mechanical and chloride binding properties of cementitious composites

[math] Treatment of Hydrated Cement Powder: Characterization and Application Consideration

Effects of Layered Double Hydroxide Nanosheets with Different Cations on the Compressive Strength of Cement Composites

Microstructure refinement of calcium-sulfate-aluminate and portland cement (CSA-PC) hybrids with accelerated CO 2 curing (ACC)

Carbonation behavior of calcium silicate hydrate (C-S-H): Its potential for CO2 capture

Understanding the role of carbon nanotubes in low carbon sulfoaluminate cement-based composite

Effect of Alkali and Sulfate on the Hydration Characteristic of Cement-Based Materials Containing Coal Gasification Slag

The Synergistic Effect of Calcained Coal-Series Kaolinite and Limestone on the Hydration of Portland Cement

Effect of Nano-SiO2 on the Mechanical Properties, Microstructure, and Hydration Process of Cementitious Materials Incorporating Hydrophobic Admixture

Influence of C–S–H seed and sodium sulfate on the hydration and strength of limestone calcined clay cement

Effect of LDH on the dissolution and adsorption behaviors of sulfate in Portland cement early hydration process

The effects of nano-C-S-H with different polymer stabilizers on early cement hydration

In-situ release and sequestration of CO 2 in cement composites using LTA zeolites

Effects of Nano-CSH on the hydration process and mechanical property of cementitious materials