Abstract:Carbon coated LiFePO4 (LiFePO4/C) with different contents of high electron conductive iron phosphide phase was synthesized by an aqueous sol–gel method in a reductive sintering atmosphere. Different synthesis parameters were used for adjusting the microstructure and phase compositions of the products. The effects of the carbon coating and iron phosphides on the electrochemical properties of the LiFePO4/C electrodes were studied by means of testing the discharge capacities at rates of 0.1–5C (1C=170mAhg−1) and analyzing the CV curves. The results show that carbon coating in a content of 1.5wt.% derived from the carbon source of ethylene glycol greatly decreases the particle size of LiFePO4 in one order in the specific surface area, and significantly improves the rate capability of LiFePO4. The effect of the content of FeP on the capacity of the carbon coated LiFePO4 was different at different discharge rates. Increasing the content of FeP from 1.2 to 3.7wt.% slightly decreases the capacity of LiFePO4/C at low discharge rate (0.1C and 1C), but obviously increases the capacity of LiFePO4/C when the discharge rate is increased to 5C. For the carbon free sample, even it also has 1.8wt.% FeP, it still possesses poor capacity due to the large particle size of LiFePO4 and the lack of conductivity. And too much iron phosphides lowers the discharge capacity of the electrode since they are inert for the deinsertion/insertion of lithium ion.

Modification of Lithium Iron Phosphate by Carbon Coating

Mixed Lithium Ion and Electron Conducting LiAlPO 3.93 F 1.07 -Coated LiCoO 2 Cathode with Improved Electrochemical Performance

Effect of Carbon-Coating on Internal Resistance and Performance of Lithium Iron Phosphate Batteries

Effect of carbon coating on the electrochemical performance of LiFePO4/C as cathode materials for aqueous electrolyte lithium-ion battery

Effect of carbon coating on electrochemical performance of Li 1.048 Mn 0.381 Ni 0.286 Co 0.286 O 2 cathode material for lithium-ion batteries

Enhanced electrochemical performance of Li 1.2 Mn 0.54 Ni 0.13 Co 0.13 O 2 cathode material coated with Li + -conductive Li 2 SiO 3 for lithium ion batteries

Effects of carbon coating and iron phosphides on the electrochemical properties of LiFePO4/C

Enhanced Electrochemical Performance of Lifepo4 Cathode Material Promoted by Cdo and Carbon Co-Coating

Fast-Charging Lithium Iron Phosphate Cathodes by Flash Carbon Coating

Effect of Amorphous FePO4 Coating on Structure and Electrochemical Performance of Li1.2Ni0.13Co0.13Mn0.54O2 As Cathode Material for Li-ion Batteries

Co-coating Effect of GdPO4 and Carbon on LiFePO4 Cathode Surface for Lithium Ion Batteries

Size-dependent Surface Phase Change of Lithium Iron Phosphate During Carbon Coating

Understanding and Recent Development of Carbon Coating on LiFePO4cathode Materials for Lithium-Ion Batteries

Carbon-Coatings Improve Performance of Li-Ion Battery

Improving rate performance of LiFePO4 cathode materials by hybrid coating of nano-Li3PO4 and carbon

Preparing carbon coated lithium ferrous phosphate using mixed iron sources

Synthesis and characterization of carbon-coated LiNi1/3Co1/3Mn1/3O2 cathode material prepared by polyvinyl alcohol pyrolysis route

Tuning the Graphitization of the Carbon Coating Layer on LiFePO4 Enables Superior Properties

Optimization of Carbon Coatings on LiFePO4: Carbonization Temperature and Carbon Content

Improving electrochemical performance of LiMn<sub>0.5</sub>Fe<sub>0.5</sub>PO<sub>4</sub> cathode by hybrid coating of Li<sub>3</sub>VO<sub>4</sub> and carbon

In Situ Synthesis and Properties of Carbon-Coated Lifepo4 As Li-Ion Battery Cathodes