Abstract:The utilisation of cotton waste as precursors in the synthesis of nanocrystalline cellulose has gained significant attention. This approach suggests a sustainable solution to address the growing concern of textile waste accumulation while simultaneously producing a valuable material. The main aim of this study is to examine the properties of cellulose nanocrystals (CNCs) obtained from postconsumer polyester–cotton waste and assess the effect of different fabric structures on the extraction and these properties. To acquire nanocellulose, a thorough decolourisation pretreatment process was utilised, which involved the treatment of polyester–cotton waste with sodium dithionite and hydrogen peroxide. Consequently, the postconsumer material was then treated with an acid hydrolysis method employing a 64% (v/v) sulphuric acid solution at 50 °C for 75 min, resulting in the formation of CNCs with average yield percentages ranging from 38.1% to 69.9%. Separation of the acid from the CNC was facilitated by a centrifugation process followed by dialysis against deionised water. Uniform dispersion was then achieved using ultrasonication. A variety of analytical techniques were employed to investigate the morphological, chemical, thermal, and physical properties of the isolated CNCs. Among these techniques, attenuated total reflection-Fourier-transform infrared spectroscopy (ATR-FTIR), energy-filtered transmission electron microscopy (EF-TEM), thermogravimetric analysis (TGA), and X-ray diffraction (XRD) were utilised to analyse the CNCs. The findings indicated that the separated CNCs exhibited a rod-shaped morphology, measuring between 78 and 358 nm in length and 5 and 16 nm in diameter, and also exhibited high crystallinity (75–89%) and good thermal stability. The extracted CNCs were mixed with polyvinyl alcohol (PVA) and glycerol to assess their reinforcing effect on plastic films. The prepared composite film exhibited improved mechanical properties and thermal stability. Incorporating CNCs led to a 31.9% increase in the tensile strength and a 42.33% rise in the modulus of elasticity. The results from this research proved that CNCs can be extracted from postconsumer mixed fabrics as a potential solution to effectively address the mounting concerns surrounding waste management in the textile industry and also provide avenues for enhancing the qualities of eco-friendly composite films.

Production of Nylon-6/Cellulose Nanocrystal Composite Films Using Solvent Dissolution

Adhesive Properties of Bio-Based Epoxy Resin Reinforced by Cellulose Nanocrystal Additives

In‐situ preparation and performance of cellulose nanocrystals grafted with polyamide 6 composites

Influence of High Loading of Cellulose Nanocrystals in Polyacrylonitrile Composite Films

Characterization of CNC Nanoparticles Prepared via Ultrasonic-Assisted Spray Drying and Their Application in Composite Films

Cationic surface functionalization of cellulose nanocrystals and its effect on the mechanical properties of polyamide 6 thin films

Gel Spinning of Polyacrylonitrile/Cellulose Nanocrystal Composite Fibers

Preparation and properties of cellulose nanocrystals-reinforced Poly (lactic acid) composite filaments for 3D printing applications

Construction of Nanocrystalline Cellulose-Based Composite Fiber Films with Excellent Porosity Performances via an Electrospinning Strategy

Physicochemical Properties of Cellulose Nanocrystals Extracted from Postconsumer Polyester/Cotton-Blended Fabrics and Their Effects on PVA Composite Films

Green Modification of Cellulose Nanocrystals and Their Reinforcement in Nanocomposites of Polylactic Acid

Effects of plant source selection and chemi-mechanical treatment on the fiber microstructures and mechanical behaviors of nanocellulose films

Individually Dispersed Wood-Based Cellulose Nanocrystals

Cellulose nanocrystals as organic nanofillers for transparent polycarbonate films

Preparation of nanocellulose by a biological method from hemp stalk in contrast to the chemical method and its application on the electrospun composite film

Preparation and Characterization of corn husk nanocellulose coating on electrospun polyamide 6

Incorporation of Cellulose Nanocrystals (cncs) into the Polyamide Layer of Thin-Film Composite (TFC) Nanofiltration Membranes for Enhanced Separation Performance and Antifouling Properties.

Preparation and Characterization of Cellulose Nanocrystal‐Doped Cellulose Triacetate Optical Films by Sol‐Gel Process

Compatibilization of poly(methyl methacrylate) and cellulose nanocrystals through co‐continuous phase to enhance the thermomechanical properties

Cellulose Nanocrystals Vs. Cellulose Nanofibrils: A Comparative Study on Their Microstructures and Effects As Polymer Reinforcing Agents

Role of solvent exchange in dispersion of cellulose nanocrystals and their esterification using fatty acids as solvents