Abstract:In this study, we present the use of a Ni-Cu alloy electrodeposited on a titanium electrode as a sensor for non-enzymatic glucose oxidation. Electrochemical parameters such as bath composition, potential, and deposition times used to obtain the films were studied. After optimization of operating conditions, the morphology, chemical composition, and surface structure of the Ni-Cu alloy electrodes were characterized using scanning electron microscopy (SEM) coupled with energy dispersive X-ray (EDX) and X-ray diffraction spectroscopy (XRD). Electrocatalytic activity of the modified Ni-Cu electrodes towards non-enzymatic glucose oxidation was then evaluated by cyclic voltammetry and chronoamperometric and impedance spectroscopy. The experimental impedance data were fitted with an equivalent circuit model representing the electrode/electrolyte interface, to evaluate the charge transfer rate as well as the electrical characteristics of the catalytic surface. Cyclic voltammetry experiments show that the Ni-Cu films prepared at − 0.975 V for 10 min significantly generated the highest oxidation current, extended linear responses for glucose concentrations in the range of 0.25 to 8 mM, with excellent values of the limit of detection (LOD, 4.97 μM) and sensitivity ( 546 μA mM −1 cm −2 ). Effects of endogenous interfering species (ascorbic acid (AA), uric acid (UA), oxalic acid, fructose, sucrose, NaCl, and KNO 3 ) on the electrocatalytic response of Ni-Cu/Ti were also studied and showed that Ni-Cu/Ti is a selective electrocatalyst towards glucose oxidation. The application of Ni-Cu/Ti biosensor in real human saliva and urine samples is demonstrated using chronoamperometric detection: the increase in current remains proportional to successive additions of glucose. Finally, it was shown that the Cu-Ni/Ti sensor presented the lowest charge transfer resistance ( R ct ) and the highest double layer capacitance values compared to those of the pure Ti, Ni/Ti, and Cu/Ti electrodes. The improved electrocatalytic activity is mainly attributed by the synergistic effect between Ni and Cu.

Electrodeposition of nickel on electrospun carbon nanofiber mat electrode for electrochemical sensing of glucose

In Situ Fabrication of Cobalt Nanoflowers on Sulfonated and Fluorinated Poly (arylene Ether Ketone-Benzimidazole) Template Film for the Electrocatalytic Oxidation of Glucose

Embedment of Well Dispersed Nickel Nanoparticles in Sulfonate and Benzimidazole Functionalized Poly (arylene Ether Ketone) Film for the Electrocatalytic Oxidation of Glucose

A Highly Sensitive Nonenzymatic Glucose Sensor Based on Cu/Cu2O Composite Nanoparticles Decorated Single Carbon Fiber

Direct Decoration of Carbon Nanohorns with Binary Nickel-Cobalt Sulfide Nanosheets Towards Non-Enzymatic Glucose Sensing in Human Fluids

A NiFe Alloy Reduced on Graphene Oxide for Electrochemical Nonenzymatic Glucose Sensing.

Electrodeposition of nickel nanostructures using silica nanochannels as confinement for low-fouling enzyme-free glucose detection

Mn3O4/NiO Nanoparticles Decorated on Carbon Nanofibers as an Enzyme-Free Electrochemical Sensor for Glucose Detection

Nanoscale Ni(OH)(x) Films on Carbon Cloth Prepared by Atomic Layer Deposition and Electrochemical Activation for Glucose Sensing

Facile preparation of a CoNiS/CF electrode by SILAR for a high sensitivity non-enzymatic glucose sensor

A non-enzymatic glucose sensor based on NiO nanoparticles/functionalized SBA 15/MWCNT-modified carbon paste electrode

Facile Preparation of Nickel Nanoparticle-Modified Carbon Nanotubes with Application As A Nonenzymatic Electrochemical Glucose Sensor

Nickel‐Foam‐Supported Co3O4 Nanosheets/PPy Nanowire Heterostructure for Non‐enzymatic Glucose Sensing

Electrodeposition of Ni-Cu alloy electrodes in sulfate–citrate medium and their use for non-enzymatic glucose oxidation

Synthesis of CoNi2S4 Nanoflake-modified Nickel Wire Electrode for Sensitive Non-enzymatic Detection of Glucose

A novel and ultrasensitive non-enzymatic electrochemical glucose sensor in real human blood samples based on facile one-step electrochemical synthesis of nickel hydroxides nanoparticles onto a three-dimensional Inconel 625 foam

Direct epitaxial growth of nickel phosphide nanosheets on nickel foam as self-support electrode for efficient non-enzymatic glucose sensing

Fabrication of porous NiMn2O4 nanosheet arrays on nickel foam as an advanced sensor material for non-enzymatic glucose detection

A novel NiO/C@rGO nanocomposite derived from Ni(gallate): A non-enzymatic electrochemical glucose sensor

A highly sensitive non-enzymatic glucose sensor based on CuNi nanoalloys through one-step electrodeposition strategy

Facile synthesis of bamboo-like Ni3S2@NCNT as efficient and stable electrocatalysts for non-enzymatic glucose detection