Abstract:Uranium, a key member of the actinides series, is radioactive and may cause severe environmental hazards once discharged into the water due to high toxicity. Removal of uranium via adsorption by applying tailored, functional adsorbents is at the forefront of tackling such pollution. Here, we report the optimized functionalization of the powder coal fly-ash (CFA) derived Na–P1 synthetic zeolite to the form of granules by employing the biodegradable polymer-calcium alginate (CA) and their application to remove aqueous U. The optimized synthesis showed that granules are formed at the CA concentration equals to 0.5 % wt., and that application of 1% wt. solution renders the most effective U scavengers. The maximum U adsorption capacity (q max ) increases significantly after CA modification from 44.48 mgU/g for native, powder Na–P1 zeolite to 62.53 mg U/g and 76.70 mg U/g for 0.5 % wt. and 1 % wt. CA respectively. The U adsorption follows the Radlich-Peterson isotherm model, being the highest at acidic pH (pH eq ∼4). The U adsorption kinetics reveals swift U uptake, reaching equilibrium after 2h for 1 % ZACB and 3 h for 0.5 % wt. ZACB following the pseudo-second-order (PSO) kinetic model. SEM-EDXS investigation elucidates that adsorbed U occurs onto materials as an inhomogenous, well-dispersed, and micrometer-scale aggregate. Further, XPS and μ-XRF spectroscopies complementarily confirmed the hexavalent oxidation state of adsorbed U and its altered distribution on ZACBs with varying CA concentrations. U distribution was probed "in-situ" onto materials while correlations between the major elements (Al, Si, Ca, U) contributing to U scavenging were calculated and compared. Finally, a real-life coal mine wastewater (CMW) polluted by 238 U and 228,226 Ra was successfully purified, satisfying WHO guidelines after treatment using ZACBs. These findings offer new insights on successful yet optimized Na–P1 zeolite modification using biodegradable polymer (Ca 2+ -exchanged alginate) aimed at efficient U removal, displaying a near-zero environmental impact.

Actinide and Lanthanide Adsorption onto Hierarchically Porous Carbons Beads: A High Surface Affinity for Pu

Molecular Modification of a Novel Macroporous Silica-Based Impregnated Polymeric Composite by Tri-N-butyl Phosphate and Its Application in the Adsorption for Some Metals Contained in a Typical Simulated HLLW.

Adsorption of Some Typical Fission Products onto a Novel Macroporous Silica-based Dialkyl Derivative of Pyridine Impregnated Material

Highly Selective Adsorption for Palladium Removal by Impregnation Preparation of a Macroporous N-based Functional Composite

Preparation of a Macroporous Silica–pyridine Multidentate Material and Its Adsorption Behavior for Some Typical Elements

Efficient Separation of Th(IV) from Highly Acidic Solution by Microporous Resin Materials Containing Two Novel Phenanthroline Phosphonates

Highly Selective Adsorption of New Bis-Opened-Triazine Materials Hybridized with a Cross-Linked Polymer Support for Palladium and Some Typical Coexisting Metals

Preparation of A Macroporous Silica-Based Pyridine Impregnated Material and Its Adsorption for Palladium

Adsorption of actinides (III) and lanthanides (III) on silica-based BCPDTPA resin: kinetics, thermodynamics, and isotherms

Mesoporous polymer-coated PAN beads for environmental applications: fabrication, characterisation and uranium adsorption studies

Sorption interactions of plutonium and europium with ordered mesoporous carbon

Covalent Phosphazene‐Based Polymers with Fully Heterocyclic Rings for Rapid and Selective Adsorption of Uranium in High Acidity

Surface-Initiated ARGET ATRP of Poly(Glycidyl Methacrylate) from Carbon Nanotubes Via Bioinspired Catechol Chemistry for Efficient Adsorption of Uranium Ions.

Preparation of a N, S, P co-doped and oxidized porous carbon for the efficient adsorption of uranium(VI)

Selective adsorption of actinides and rare earth elements from leach liquor using metal oxide-polymer nanocomposites

Efficient uranium adsorption by amidoximized porous polyacrylonitrile with hierarchical pore structure prepared by freeze-extraction

Layer-by-layer grafting synthesis of silicon-based zirconium organophosphate for the enhanced and selective adsorption of lanthanides

Functionalized graphene nanoplatelets: a promising adsorbent for solid-phase uranium extraction

High Electrosorption Capacity of Uranium (VI) by Carboxylic Acid Functionalized N, P Co-Doped Carbon Materials

Elucidating uranium interactions with synthetic Na–P1 zeolite/Ca 2+ -substituted alginate composite granules through batch and spectroscopic studies: Emphasizing the significance of ion exchange and complexation

Selective Sequestration of Perrhenate by Cationic Polymeric Networks Based on Elongated Pyridyl Ligands