Abstract:The development of lithium–sulfur (Li–S) batteries is of practical significance to meet the rapidly escalating demand for advanced energy storage technologies with long life and high-energy density. However, the dissolution and shuttling of the intermediate polysulfides (PS) initiates the loss of active sulfur and the poisoning of the lithium anode, leading to unsatisfactory cyclability and consequently hinders the commercialization of Li–S batteries. Herein, we develop a facile strategy to tame the PS dissolution and the shuttling effect in the Li–S system by introducing a modified polybenzimidazole (mPBI) with multiple functions. As a binder, the excellent mechanical property of mPBI endows the sulfur electrode with strong integrity and, therefore, results in high sulfur loading (7.2 mg cm−2), whereas the abundant chemical interaction between mPBI and PS affords efficient PS adsorption to inhibit sulfur loss and prolong battery life. As a functional agent for the separator, the mPBI builds a PS shield onto the separator to block PS’s migration to further suppress the PS shuttling. The dual actions of mPBI confer an excellent performance of 750 mAh g−1 (or 5.2 mAh cm−2) after 500 cycles at C/5 on the Li–S battery with an ultralow capacity fading rate of 0.08% per cycle. Researchers have used a super-stable polymer to block adverse dissolution effects in energy-rich rechargeable lithium-sulfur batteries. Polybenzimidazole (PBI) polymers find use in firefighting equipment and astronaut spacesuits because of their high mechanical and thermal stability. Research team led by Shanqing Zhang from Griffith Universityin Australia and Zhoupeng Li from Zhejiang University in China now shows that PBI can make an attractive binder and separating agent for next-generation batteries. While the lithium-sulfur system has higher energy density than current lithium-ion batteries, polysulfides shuttling effect, the main technical barrier often degrades device efficiency. The team prepared a new electrode by mixing a sulfur-carbon composite with a modified form of PBI. They found battery durability improved by three to five times over typical polymer binders, while favorable binding interactions between PBI and polysulfides enhanced performance and cycling stability. A modified polybenzimidazole (mPBI) was synthesized to tame the polysulfides (PS) shuttling in Li–S batteries via dual actions. As a binder, the mPBI mechanically and chemically offers strong electrode integrity and high sulfur loading, inhibits sulfur loss and prolongs lifespan for sulfur electrode. As a functional agent, the mPBI builds a shield onto the separator to block PS migration so as to further suppress the PS shuttling. This strategy confers an excellent performance of 750 mAh g−1 (or 5.2 mAh cm−2) after 500 cycles at C/5 for the resultant Li–S battery with an ultralow capacity fading rate of 0.08% per cycle.

Reduced shuttle effect by dual synergism of lithium–sulfur batteries with polydopamine-modified polyimide separators

Effective Dual Polysulfide Rejection by a Tannic Acid/Fe-III Complex-Coated Separator in Lithium-Sulfur Batteries

Reduced Polysulfide Shuttle Effect by Using Polyimide Separators with Ionic Liquid-based Electrolytes in Lithium-Sulfur Battery

Suppression Of Polysulfide Shuttling With A Separator Modified Using Spontaneously Polarized Bismuth Ferrite For High Performance Lithium-Sulfur Batteries

Enhanced Performance of Lithium Sulfur Batteries with Conductive Polymer Modified Separators

A New Polysulfide Blocker - Poly(acrylic Acid) Modified Separator for Improved Performance of Lithium-Sulfur Battery

Separator engineering toward suppressed shuttle effect and homogenized lithium deposition in lithium−sulfur batteries

Ultra-thin nanosheets decorated in-situ S-doped 3D interconnected carbon network as interlayer modified Li-S batteries separator for accelerating adsorption-catalytic synergistic process of LiPSs

Empowering polypropylene separator with enhanced polysulfide adsorption and reutilization ability for high-performance Li-S batteries

Enhancing electrochemical properties of lithium sulfur battery by using modified separator with phase-inversion layer

Effective Suppression of the Polysulfide Shuttle Effect in Lithium–Sulfur Batteries by Implementing rGO–PEDOT:PSS-Coated Separators via Air-Controlled Electrospray

The Dual Actions of Modified Polybenzimidazole in Taming the Polysulfide Shuttle for Long-Life Lithium–sulfur Batteries

Interfacial polymerization achieved integration of pore size adjustment, electrostatic repulsion and physical adsorption into one to inhibit polysulfide shuttle for enhanced lithium–sulfur battery

Application of Double-Side Modified Separator with Hollow Carbon Material in High-Performance Li-S Battery

Toward Safe and High-Performance Lithium–Sulfur Batteries Via Polyimide Nanosheets-Modified Separator

In Situ Self‐Polymerization of Thioctic Acid Enabled Interphase Engineering Towards High‐Performance Lithium–Sulfur Battery

Polydopamine-assisted in-situ formation of dense MOF layer on polyolefin separator for synergistic enhancement of lithium-sulfur battery

Effective Inhibition of the Polysulfide Shuttle Effect in Lithium–Sulfur Batteries By Rgo-PEDOT:PSS Coated Separators Via Air-Controlled Electrospray

Poly (3,4-ethylenedioxythiophene):poly (styrenesulfonate)- decorated separator in Li-O2 batteries: Suppressing the shuttle effect of dual redox mediators by coulombic interactions

Synergetic effect of block and catalysis on polysulfides by functionalized bilayer modification on the separator for lithium-sulfur batteries

Flame-retardant and Thermal-Stable Separator Trapping Polysulfides for Lithium-Sulfur Battery