Abstract:Inductively coupled plasma generator is one of the core components of the near-space high-speed target plasma electromagnetic scientific experimental research device, which is often used to simulate high enthalpy and high speed plasma sheath environment. In order to study the discharge characteristics of inductively coupled plasma generator under high power, radio frequency and medium pressure, the numerical simulation and experiment are combined to study its internal heat transfer and flow characteristics in this paper. Based on the local thermodynamic equilibrium conditions, the numerical simulation of large-scale radio frequency and medium pressure inductively coupled plasma with a power of 100–400 kW is carried out through the multi-field coupling of flow, electromagnetic and temperature field, and verified by light intensity and spectrum experiment. The results show that the electromagnetic field distribution in the high-power thermal balance inductively coupled plasma generator is similar to that of the small- and medium-sized power plasma generator. The discharge energy dissipation occurs mainly in the area where the induction coil is located. The temperature of the inner wall of the quartz tube is higher at the coil location than in other areas, and the plasma has a ring-shaped high-temperature structure. The outer wall of the quartz tube is set to be the boundary condition of heat flux for simulating the temperature change of the quartz tube under cold blowing. This setting is in coincidence with factual situations. The wall temperature of the quartz tube at the entrance and at the induction coil section are found to be relatively high. When the large-size inductively coupled plasma generator works, an obvious return vortex is generated at the entrance due to the temperature difference and the electromagnetic pumping effect, and the exit velocity increases slightly with the increase of power. At the same time, the discharge experiment under the corresponding conditions shows that there is found a ring structure with bright edges and dark centers in the axial image of the argon discharge. Moreover, the emission spectrum of argon plasma is measured through the spectrum diagnosis system and the spatial distribution of the generator electron temperature is obtained. The light intensity of the discharge image and the electron temperature measured by the spectrum are found to be in comparative coincidence with the COMSOL simulation temperature result, demonstrating the validity of the numerical simulation results under thermodynamic equilibrium conditions. The numerical simulation results in this paper are also applicable to the optimization design and temperature resistance evaluation of the inductively coupled plasma generator.

Review of Thermal Plasma Simulation Technique

Review of Thermal Plasma Simulation Technique

Advances in Thermal Plasma Temperature Diagnostic Methods

A 2-D Axisymmetric Magneto-Hydrodynamic Model of a DC Arc Plasma Torch and Its Solution Methodology

Review on the Simulation Method of Non-Equilibrium Arc Plasma During Current Zero Period in the Circuit Breaker

Numerical Simulation of Heat Transfer and Fluid Flow of a Non-Equilibrium Argon Plasma Jet with Confined Wall

Numerical Analysis of the Arc Plasma in A Simplified Low-Voltage Circuit Breaker Chamber with Ferromagnetic Materials

Thermodynamic Parameters and Energy Transfer Analysis of High Enthalpy Inductively Coupled Plasma

Editorial: Plasma and related sciences: experimental and theoretical approaches

Numerical Simulation and Experimental Study of High-Power Thermal Equilibrium Inductively Coupled Plasma

Applications of Plasma Technologies in Recycling Processes

Two-dimensional kinetic simulation of plasma dynamics in the post-arc stage of vacuum circuit breakers

The simulation and experimental research on air arc plasma considering wall ablation in low-voltage circuit breakers

The simulation of terahertz waves transmission in the arc plasma

Theoretical Simulation of Thermal Behavior in Transient Heat Loads Testing of Plasma-Facing Materials

Three-dimensional flow and heat transfer in thermal plasma systems

Numerical Study of Plasma–Electrode Interaction During Arc Discharge in a DC Plasma Torch

Gaseous Switching Arc and Extension to Pulsed Plasma

Review on the Research Progress of Arc Plasma Power Sources in China

Study on Electric Property of Multi-Constrict Arc Plasma

Hybrid finite-volume–finite-element scheme for 3D simulation of thermal plasma arc configuration