Abstract:OBJECTIVE: Foreign body response to indwelling cortical microelectrodes limits the reliability of neural stimulation and recording, particularly for extended chronic applications in behaving animals. The extent to which this response compromises the chronic stability of neural devices depends on many factors including the materials used in the electrode construction, the size, and geometry of the indwelling structure. Here, we report on the development of microelectrode arrays (MEAs) based on amorphous silicon carbide (a-SiC).APPROACH: This technology utilizes a-SiC for its chronic stability and employs semiconductor manufacturing processes to create MEAs with small shank dimensions. The a-SiC films were deposited by plasma enhanced chemical vapor deposition and patterned by thin-film photolithographic techniques. To improve stimulation and recording capabilities with small contact areas, we investigated low impedance coatings on the electrode sites. The assembled devices were characterized in phosphate buffered saline for their electrochemical properties.MAIN RESULTS: MEAs utilizing a-SiC as both the primary structural element and encapsulation were fabricated successfully. These a-SiC MEAs had 16 penetrating shanks. Each shank has a cross-sectional area less than 60 µm2 and electrode sites with a geometric surface area varying from 20 to 200 µm2. Electrode coatings of TiN and SIROF reduced 1 kHz electrode impedance to less than 100 kΩ from ~2.8 MΩ for 100 µm2 Au electrode sites and increased the charge injection capacities to values greater than 3 mC cm-2. Finally, we demonstrated functionality by recording neural activity from basal ganglia nucleus of Zebra Finches and motor cortex of rat.SIGNIFICANCE: The a-SiC MEAs provide a significant advancement in the development of microelectrodes that over the years has relied on silicon platforms for device manufacture. These flexible a-SiC MEAs have the potential for decreased tissue damage and reduced foreign body response. The technique is promising and has potential for clinical translation and large scale manufacturing.

Electrochemical characteristics of ultramicro-dimensioned SIROF electrodes for neural stimulation and recording

Fabrication and Electrochemical Comparison of SIROF-AIROF-EIROF Microelectrodes for Neural Interfaces

Amorphous silicon carbide ultramicroelectrode arrays for neural stimulation and recording

Thinking Small: Progress on Microscale Neurostimulation Technology

Electrodeposited Platinum Iridium Enables Microstimulation With Carbon Fiber Electrodes

Sputtered Iridium Oxide Modified Flexible Parylene Microelectrodes Array for Electrical Recording and Stimulation of Muscles

Graphene-based micro-electrodes with reinforced interfaces and tunable porous structures for improved neural recordings

Substrate arrays of iridium oxide microelectrodes for in vitro neuronal interfacing

In vitro and in vivo evaluation of PEDOT microelectrodes for neural stimulation and recording

Electrochemical Properties of Sputtered Ruthenium Oxide Neural Stimulation and Recording Electrodes

Evaluation of microelectrode materials for direct-current electrocorticography

Flexible Silk Fibroin-Based Microelectrode Arrays for High-Resolution Neural Recording

A Nanozyme‐Based Electrode for High‐Performance Neural Recording

Fabrication and Degradation Characteristic of Sputtered Iridium Oxide Neural Microelectrodes for FES Application

Fabrication and Validation of Sub-Cellular Carbon Fiber Electrodes

Direct measurement of oxygen reduction reactions at neurostimulation electrodes

Stimulation and Recording of the Hippocampus Using the Same Pt-Ir Coated Microelectrodes

Micro- and nanotechnology for neural electrode-tissue interfaces

Electrical Characteristics of A Stimulating Microelectrode-Electrolyte Interface

A nanowell-based MoS2 neuroelectrode for high-sensitivity neural recording

High sensitivity recording of afferent nerve activity using ultra-compliant microchannel electrodes: an acute in vivo validation