Abstract:Manganese oxides and carbon materials are both desirable catalysts for persulfate (PS) advanced oxidation processes in environmental remediation. Nevertheless, manganese oxides suffer from low reusability while carbon materials face the problem of limited catalytic efficiency. For the purpose of making full use of the advantages of the two materials as well as avoiding their shortcomings, carbon-coated Mn3O4 composites (Mn3O4/C) with a regular nanocube structure were designed to activate PS for the removal of organics, and the catalytic processes were deeply investigated. The catalyst prepared at 400 °C with a precursor ratio (glucose/KMnO4) of 0.5 exhibited the best catalytic performance along with satisfactory reusability owing to the protection of the outer carbon layer. According to experimental results and density functional theory calculation, there were van der Waals interaction and a part of the strong attraction between the interface of PS and Mn3O4/C, which could be enhanced by inner Mn3O4 and thus promoted the electron transfer between PS and carbon shell, and the defective edges of the carbon layer with hydroxyl (C–OH) groups could act as active sites for PS activation. Radical (SO4•–, •OH) and nonradical (1O2) oxidation processes both participated in the degradation of 2,4-dichlorophenol, in which •OH was dominating. This study not only proposed a promising catalyst for the degradation of pollutants but also expanded research ideas for future PS activation mechanism studies by integrating the experiment and simulation.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acscatal.0c04049?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acscatal.0c04049</a>.Experimental detection method and pseudo-first-order kinetics fitting model; XRD, SEM, nitrogen adsorption–desorption isotherms, FTIR spectrum, and XPS survey of the catalyst; TOC changes of 2,4-D; pseudo first-order kinetics fitting of the reaction; effects of PS and catalyst dosage; zeta potentials of 0.5-Mn3O4/C-T4; linear correlation results between pH and kobs; dynamic changes of solution pH with the low PS concentration; molecular structure of pollutants; degradation of 2,4-D by different carbon materials; cyclic voltammograms; optimized structures of models for DFT calculation; RDG isosurfaces of COH/PS; effects of MeOH and TBA on 2,4-D removal efficiency; decomposition of PS in the presence of NaN3; pore structure parameters of materials; and distance, bond length, and Bader charge in different structures (<a class="ext-link" href="/doi/suppl/10.1021/acscatal.0c04049/suppl_file/cs0c04049_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Role of radical and non-radical pathway in activating persulfate for degradation of p-nitrophenol by sulfur-doped ordered mesoporous carbon

Different non-radical oxidation processes of persulfate and peroxymonosulfate activation by nitrogen-doped mesoporous carbon

Stable Incorporation of MnOx Quantum Dots into N-doped Hollow Carbon: A Synergistic Peroxymonosulfate Activator for Enhanced Removal of Bisphenol A

Initiating nonradical-dominated persulfate activation by N doping on Co<sub>3</sub>O<sub>4</sub> enables efficient organic pollutant degradation

Catalytic activation of peroxymonosulfate by Mn/N co-doped porous carbon for effective phenol degradation: Crucial role of non-radical pathways

Selective <SUP>1</SUP>O<sub>2</sub> Generation from Peroxymonosulfate Activation over N-Doped Carbon Nanosponges for Pollutant Degradation

Activation of peroxymonosulfate by nitrogen-doped porous carbon for efficient degradation of organic pollutants in water: Performance and mechanism

Rational design of efficient metal-free catalysts for peroxymonosulfate activation: Selective degradation of organic contaminants via a dual nonradical reaction pathway

Synergy of Carbocatalytic and Heat Activation of Persulfate for Evolution of Reactive Radicals Toward Metal-Free Oxidation

Nonradical activation of peroxymonosulfate via N-doped microporous carbon from hypercrosslinked polymers for phenol degradation

Efficient removal of organic pollutants by a Co/N/S-doped yolk-shell carbon catalyst via peroxymonosulfate activation

Rational Regulation of Peroxymonosulfate Activation over Porous Co3O4 with Carbon Coating to Boost Utilization Efficiency of Peroxymonosulfate and Achieve Rapid Removal of Pollutants.

Origin of the Enhanced Reusability and Electron Transfer of the Carbon-Coated Mn 3 O 4 Nanocube for Persulfate Activation

Exploring the peroxydisulfate activation by carbon nanotubes for pollutants degradation: Identification of the primary reaction mechanism and key molecular descriptor

Nitrogen and sulfur dual doped porous carbon as metal-free catalyst for oxidative degradation of 4-nitrophenol by persulfate activation

Understanding the active sites and associated reaction pathways of metal-free carbocatalysts in persulfate activation and pollutant degradation

Metal-free carbocatalysis for persulfate activation toward nonradical oxidation: Enhanced singlet oxygen generation based on active sites and electronic property

Selective Degradation of Organic Pollutants Using an Efficient Metal-Free Catalyst Derived from Carbonized Polypyrrole Via Peroxymonosulfate Activation

Non-doping 3D porous carbon with rich intrinsic defects for efficient nonradical activation of peroxymonosulfate toward the degradation of organic pollutants

Rational regulation of peroxymonosulfate activation over porous Co 3 O 4 with carbon coating to boost utilization efficiency of peroxymonosulfate and achieve rapid removal of pollutants

Probing the activation mechanism of nitrogen-doped carbonaceous materials for persulfates: Based on the differences between peroxymonosulfate and peroxydisulfate