Abstract:We report the results of quantitative phase-field simulations of the dendritic crystallization of a pure melt in two and three dimensions. These simulations exploit a recently developed thin-interface limit of the phase-field model [A. Karma and W.-J. Rappel, Phys. Rev. E 53, R3017 (1996)], which is given here a detailed exposition. This limit makes it possible to perform efficient computations with a smaller ratio of capillary length to interface thickness and with an arbitrary interface kinetic coefficient. Simulations in one and two dimensions are first carried out to test the accuracy of phase-field computations performed within this limit. Dendrite tip velocities and tip shapes are found to be in excellent quantitative agreement with exact numerical benchmarks of solvability theory obtained by a boundary integral method, both with and without interface kinetics. Simulations in three dimensions exploit, in addition to the asymptotics, a methodology to calculate grid corrections due to the surface tension and kinetic anisotropies. They are used to test basic aspects of dendritic growth theory that pertain to the selection of the operating state of the tip and to the three-dimensional morphology of needle crystals without sidebranches. For small crystalline anisotropy, simulated values of σ* are slightly larger than solvability theory predictions computed by the boundary integral method assuming an axisymmetric shape, and agree relatively well with experiments for succinonitrile given the uncertainty in the measured anisotropy. In contrast, for large anisotropy, simulated σ* values are significantly larger than the predicted values. This disagreement, however, does not signal a breakdown of solvability theory. It is consistent with the finding that the amplitude of the cos4φ mode, which measures the departure of the tip morphology from a shape of revolution, increases with anisotropy. This departure can therefore influence the tip selection in a way that is not accurately captured by the axisymmetric approximation for large anisotropy. Finally, the tail shape at a distance behind the tip that is large compared to the diffusion length is described by a linear law r∼z with a slope dr/dz that is nearly equal to the ratio of the two-dimensional and three-dimensional steady-state tip velocities. Furthermore, the evolution of the cross section of a three-dimensional needle crystal with increasing distance behind the tip is nearly identical to the evolution of a two-dimensional growth shape in time, in accord with the current theory of the three-dimensional needle crystal shape.

Modeling of dendrite growth in undercooled solution sodium acetate trihydrate

Phase-Field Simulation of Three-Dimensional Dendritic Growth

3D Modeling and Simulation of Dendritic Growth During Solidification

Dendritic Solidification of Highly Undercooled Dilute Alloys

Numerical Simulation of Three-Dimensional Dendritic Growth Using Phase-Field Method

Numerical Simulation of Dendrite Growth with Different Preferred Growth Orientation Angles

Microstructure evolution during dendrite coarsening in an isothermal environment: 3-D cellular automaton modeling and experiments

Simulation of Nh4cl-H2o Dendritic Growth in Directional Solidification

Simulation of Three-Dimensional Dendritic Growth Using H-adaptive Finite Element Method

Simulation and Experimental Research of Melt Convection on Dendrite Morphology Evolution

A Cellular Automaton Technique for Modelling of a Binary Dendritic Growth with Convection

Phase Field Modelling of Dendrite Fragmentation During Thermal Shock

Three-dimensional thermosolutal simulation of dendritic and eutectic growth

A Study on Ammonium Chloride Dendrite Tip Kinetics: The Importance of the Solid–Liquid Density Change and Interfacial Kinetics

Numerical Modelling Of Microstructure Evolution And Dendrite Growth In Alloy Solidification Process

A Three-Dimensional Cellular Automaton Model of Dendrite Growth with Stochastic Orientation During the Solidification in the Molten Pool of Binary Alloy

Modeling of Dendritic Structure During Solidification Process Based on Cellular Automaton Model

Quantitative phase-field modeling of dendritic growth in two and three dimensions

Simulation and Experimental Validation of Three-Dimensional Dendrite Growth

Atypical crystal growth within the Supercritical Antisolvent process: experimental and molecular modeling approach with Sodium Bicarbonate

Improvement of the Subcooling Problem of Sodium Acetate Trihydrate by a Combination of Stirring or Internal Electric Field and Nucleating Agent