Abstract:Fillers have been widely used in natural rubber (NR) products. They are introduced to serve as a strategy for modifying the final properties of NR vulcanizates. Silica and calcium carbonate (CaCO3) are among the fillers of choice when the color of the products is concerned. In this case, a special focus was to compare the vulcanizing efficiency of NR filled with two different filler types, namely nano-sized silica and micrometer-sized CaCO3. This study focused on the effects of the loading level (10–50 parts per hundred parts of rubber, phr) on the final properties and structural changes of NR composites. The results indicated that increased filler loading led to higher curing torques and stiffness of the rubber composites irrespective of the type of filler used. The better filler dispersion was achieved in composites filled with CaCO3 which is responsible for less polarity of CaCO3 compared to silica. Good filler distribution enhanced filler–matrix interactions, improving swelling resistance and total crosslink density, and delaying stress relaxation. The modulus and tensile strength of both composites also improved over the content of fillers. The CaCO3-filled composites reached their maximum tensile strength at 40 phr, exceeding, by roughly 88%, the strength of an unfilled sample. Conversely, the maximum tensile strength of silica-filled NR was at 20 phr and was only slightly higher than that of its unfilled counterpart. This discrepancy was ascribed to the stronger rubber–filler interactions in cases with CaCO3 filler. Effective rubber–filler interactions improved strain-induced crystallization, increasing crystallinity during stretching and reducing the strain at which crystallization begins. In contrast, large silica aggregates with poor dispersion reduced the overall crosslink density, and degraded the thermomechanical properties, tensile properties, and strain-induced crystallization ability of the NR. The results clearly indicate that CaCO3 should be favored over silica as a filler in the production of some rubber products where high performance was not the main characteristic.

Improvements in filler dispersion and tensile properties of natural rubber vulcanizates applying lauryl alcohol

Improvements in the degree of filler dispersion and tensile properties of N550 and N220 carbon blacks-filled natural rubber composites using alkanolamide

The degree of filler dispersion, rheometric and mechanical properties of carbon black-filled styrene-butadiene rubber composites in the presence of alkanolamide

Comparative Investigation of Nano-Sized Silica and Micrometer-Sized Calcium Carbonate on Structure and Properties of Natural Rubber Composites

Bromide and Chloride Ionic Liquids Applied to Enhance the Vulcanization and Performance of Natural Rubber Biocomposites Filled with Nanosized Silica

Effect of Silane Coupling Agent on the Polymer‐filler Interaction and Mechanical Properties of Silica‐filled NR

Influence of Fillers and Ionic Liquids on the Crosslinking and Performance of Natural Rubber Biocomposites

Tailoring Reinforcement and Strain Softening Behaviors of Natural Rubber Vulcanizates Nanocomposites by Dopamine-Modified Silica

Effects of modified silica on the co‐vulcanization kinetics and mechanical performances of natural rubber/styrene–butadiene rubber blends

Cure Characteristics and Mechanical Properties of NR/ SBR Blends Filled with Nano-sized CaCO<sub>3</sub>

Mechanical Properties and Thermal Resistance of Natural Rubber Nanocomposite Reinforced with Quaternized Polyvinyl Alcohol/Silica Nanoclusters

Effect of Vinyltriethoxysilane on the Properties of Liquid Silicone Rubber

Effect of Fillers and Additives on the Properties of SBR Vulcanizates

Cardanol grafted onto liquid isoprene rubber like groud brothers hanging on the vine: A green plasticizer and compatibilizer

Influence of Ionic Liquids on Structure and Rheological Behaviors of Silica-Filled Butadiene Rubber

Preparation and Properties of High Performance Bio-based Elastomer Based on Methyl Methacrylate Grafted Natural Rubber

Effect of curatives and fillers on vulcanization, mechanical, heat aging, and dynamic properties of silicone rubber and fluororubber blends

Enhancing Interfacial Interaction and Mechanical Properties of Styrene-Butadiene Rubber Composites Via Silica-Supported Vulcanization Accelerator

Enhancing properties of natural rubber nanocomposites with hybrid fillers and ionic liquid

Application of Plasticizer Glycerol in Lignosulfonate-Filled Rubber Compounds Based on SBR and NBR

Effect of novel supported vulcanizing agent on the interfacial interaction and strain-induced crystallization properties of natural rubber nanocomposites