Abstract:Purpose The purpose of this paper is to focus on finding the optimal maintenance interval and the minimum maintenance cost for redundant system, considering environment factors. Design/methodology/approach The authors propose a decision model with environment-based preventive maintenance for the repairable redundant system. Referring to the k-out-of-n model and Proportional Hazard Model, the reliability analysis is completed for the redundant system affected by internal and external issues. Meanwhile, the maintenance cost for the redundant system is divided into two categories: the fixed maintenance cost involving whole system replacement at the time of system failure, and the cost to replace failure components when the system still functions. Findings Upon the required reliability analysis, an optimal maintenance interval that minimizes the average maintenance cost per unit time is identified. The simulation results indicate that the optimal maintenance interval with consideration of environmental factors is significantly shorter than that without consideration of these factors, with the maintenance cost increase within 10 percent. Practical implications The redundant systems have widely been used in industries including the aero craft control system and warship power system. The model could be applied in the more real case considering the types of components and the operation environment, and help production managers better maintain machines by increasing the safety and reliability of the redundant model with the more frequent inspection. Originality/value Previous research of redundant system always focuses on internal degradation, while ignoring the reliability analysis for a redundant system with various multiple components under the influence of environment. However, this work could fill the theoretical gap, i.e. simultaneously consider both environmental and internal factors for a redundant system with non-homogeneous components. Meanwhile, the proposed superior model increases the reliability and safety of the k-out-of-n model with reasonable cost. Production managers could benefit a lot from this as well.

An operating environment-based preventive maintenance decision model

An Optimum Condition-Based Replacement And Spare Provisioning Policy Based On Markov Chains

Hybrid Preventive Maintenance Model Based on Reliability Constraint

Condition-based maintenance policy for systems under dynamic environment

Redundancy Design and Preventive Maintenance for a Load-Sharing Multiasset System Considering Uncertain Environmental Conditions

An adaptive reliability-based maintenance policy for mechanical systems under variable environments

An Adaptive Maintenance Model Oriented to Process Environment of the Manufacturing Systems

Hybrid preventive maintenance of competing failures under random environment

Optimal Maintenance Policy for Multi-Component Systems under Markovian Environment Changes.

Joint Optimization Of Preventive Replacement And Periodic Review Spare Part Provisioning Policy With Used Items

Maintenance optimization of a two‐component series system considering masked causes of failure

Optimal Selective Maintenance Decision-Making for Consecutive-Mission Systems with Variable Durations and Limited Maintenance Time

Optimal maintenance over a finite time horizon for a system under imperfect inspection and dynamic working environment

Condition-based maintenance assessment for a deteriorating system considering stochastic failure dependence

Real-time prediction of remaining useful life and preventive opportunistic maintenance strategy for multi-component systems considering stochastic dependence

An Optimal Model for Planned Maintenance of Electrical Equipment Based on Availability Constraint

Optimization of preventive maintenance for a multi-state degraded system by monitoring component performance

Combined Redundancy Allocation and Maintenance Planning Using a Two-Stage Stochastic Programming Model for Multiple Component Systems

Imperfect Preventive Maintenance Model Based on Different Failure Types

A condition-based and opportunistic maintenance model for a two-unit deteriorating system

Optimal maintenance policy for a k-out-of-n system with replacement first and last