Abstract:Recently, aluminum–air batteries have attracted great interest owing to their high output energy density, low cost, and feasibility to store and transport Al metal. However, the commercial application is still hindered by the lack of a high-performance air cathode, where the oxygen reduction reaction (ORR) happens, requiring fast charge transfer and mass transport at the catalyst–electrolyte–air interface. Herein, we report an aerophilic air cathode featuring both high intrinsic catalytic activity and large three-phase interface to facilitate air transport, which is prepared by growing cobalt-embedded and nitrogen-doped carbon nanotube (CoNCNT) arrays on carbon fiber paper and then modifying surface wettability with polytetrafluoroethylene solution. The optimized air electrode during the ORR shows a high onset potential of 0.95 V and fast current increase of 342.96 mA cm<sup>–2</sup> V<sup>–1</sup>, which is comparable to the commercial 20 wt % Pt/C, and has even better stability under the same conditions. Moreover, the aluminum–air battery with the aerophilic air electrode is superior to the battery with a commercial Pt/C electrode or aerophobic electrode in terms of maximum power density and long discharging durability. Bubble behavior measurement shows that aerobic wettability plays an important role in gas transport, thus controlling ORR efficiency of the air electrode. The concept of the gas-wettable electrode proves to be effective in the enhancement of oxygen reduction kinetics and would be also adapted in other gas-involved electrodes for energy-related applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c00837?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c00837</a>.Elemental mapping images and C 1s XPS spectrum of CoNCNTs/CP; basic bubble contact angle results on different PTFE-modified CoNCNTs/CP; ORR polarization curves under different conditions and K-L plots of 0.8-CoNCNTs, Pt/C and CoNCNTs; CV curves at different scan rates of 0.8-CoNCNTs/CP, Pt/C, and CoNCNTs/CP; electrolyte droplet contact angles on 0.8-CoNCNTs/CP after the long-term reaction; optical pictures of the self-assembled Al–air battery; possible application demonstration; and table of relative atomic contents in CoNCNTs/CP (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c00837/suppl_file/am1c00837_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

PtFe Alloy Nanoparticles Confined on Carbon Nanotube Networks as Air Cathodes for Flexible and Wearable Energy Devices

Fe3C cluster-promoted single-atom Fe, N doped carbon for oxygen-reduction reaction

Flexible, Porous, and Metal-Heteroatom-Doped Carbon Nanofibers as Efficient ORR Electrocatalysts for Zn-Air Battery

Integrated and Binder‐Free Air Cathodes of Co3Fe7 Nanoalloy and Co5.47N Encapsulated in Nitrogen‐Doped Carbon Foam with Superior Oxygen Reduction Activity in Flexible Aluminum‐Air Batteries

Rational design of iron single atom anchored on nitrogen doped carbon as a high-performance electrocatalyst for all-solid-state flexible zinc-air batteries

Pyridinic-N exclusively enriched CNT encapsulated NiFe interfacial alloy nanoparticles on knitted carbon fiber cloth for bifunctional oxygen catalysts and biaxially flexible zinc-air batteries

Self-Templated Hierarchically Porous Carbon Nanorods Embedded with Atomic Fe-N<sub>4</sub> Active Sites as Efficient Oxygen Reduction Electrocatalysts in Zn-Air Batteries

Integrated and Binder‐Free Air Cathodes of Co 3 Fe 7 Nanoalloy and Co 5.47 N Encapsulated in Nitrogen‐Doped Carbon Foam with Superior Oxygen Reduction Activity in Flexible Aluminum‐Air Batteries

Bimetal nanoparticles hybridized with carbon nanotube boosting bifunctional oxygen electrocatalytic performance

Iron-based nanoparticles embedded in nitrogen-doped carbon nanofibers towards efficient oxygen reduction for zinc-air batteries

Fe3N Nanoparticle-Encapsulated N-Doped Carbon Nanotubes on Biomass-Derived Carbon Cloth as Self-Standing Electrocatalyst for Oxygen Reduction Reaction

A Facile and Scalable Strategy for Fabrication of Superior Bifunctional Freestanding Air Electrodes for Flexible Zinc–Air Batteries

Doping of Self-Standing CNT Fibers: Promising Flexible Air-Cathodes for High Energy Density Structural Zn-air batteries

Prussian Blue‐Derived Atomic Fe/Fe3C@N‐Doped C Catalysts Supported by Carbon Cloth as Integrated Air Cathode for Flexible Zn‐Air Batteries

Bubble-like Fe-encapsulated N,S-codoped carbon nanofibers as efficient bifunctional oxygen electrocatalysts for robust Zn-air batteries

Integration of Fe2N Nanoparticles and FeCo Alloys into N-Doped Carbon Nanotubes As Efficient Oxygen Catalysts for Rechargeable Zn–air Batteries

Flexible and wearable all-solid-state Al-air battery based on iron carbide encapsulated in electrospun porous carbon nanofibers.

Stable confinement of Fe/Fe3C in Fe, N-codoped carbon nanotube towards robust zinc-air batteries

Well-dispersed ultrafine CoFe nanoalloy decorated N-doped hollow carbon microspheres for rechargeable/flexible Zn-air batteries

A Ni-Fe layered double hydroxide anchored FeCo nanoalloys and Fe-Co dual single-atom electrocatalysts for rechargeable and flexible zinc-air and aluminum-air batteries

Aerophilic Co-Embedded N-Doped Carbon Nanotube Arrays as Highly Efficient Cathodes for Aluminum–Air Batteries