Abstract:Discrete fine-scale models, in the form of either particle or lattice models, have been formulated successfully to simulate the behavior of quasi-brittle materials whose mechanical behavior is inherently connected to fracture processes occurring in the internal heterogeneous structure. These models tend to be intensive from the computational point of view as they adopt an “a priori” discretization anchored to the major material heterogeneities (e.g. grains in particulate materials and aggregate pieces in cementitious composites) and this hampers their use in the numerical simulations of large systems. In this work, this problem is addressed by formulating a general multiple scale computational framework based on classical asymptotic analysis and that (1) is applicable to any discrete model with rotational degrees of freedom; and (2) gives rise to an equivalent Cosserat continuum. The developed theory is applied to the upscaling of the Lattice Discrete Particle Model (LDPM), a recently formulated discrete model for concrete and other quasi-brittle materials, and the properties of the homogenized model are analyzed thoroughly in both the elastic and the inelastic regime. The analysis shows that the homogenized micropolar elastic properties are size-dependent, and they are functions of the RVE size and the size of the material heterogeneity. Furthermore, the analysis of the homogenized inelastic behavior highlights issues associated with the homogenization of fine-scale models featuring strain-softening and the related damage localization. Finally, nonlinear simulations of the RVE behavior subject to curvature components causing bending and torsional effects demonstrate, contrarily to typical Cosserat formulations, a significant coupling between the homogenized stress–strain and couple-curvature constitutive equations.

A Biot–Cosserat two-dimensional elastic nonlinear model for a micromorphic medium

An Anisotropic Micro-Sphere Approach Applied to the Modelling of Soft Biological Tissues

A computational approach to identify the material parameters of the relaxed micromorphic model

Local micromorphic non-affine anisotropy for materials incorporating elastically bonded fibers

Cyclic plastic behavior analysis based on the micromorphic mixed hardening plasticity model

A structurally frame-indifferent model for anisotropic visco-hyperelastic materials

A Macro-microscopic Coupled Constitutive Model for Fluid-Saturated Porous Media with Compressible Constituents

Generalized multiscale finite element method for a nonlinear elastic strain-limiting Cosserat model

Anisotropic evolution of viscous strain in soft biological materials

The isotropic relaxed micromorphic model in polar coordinates and its application to an elastostatic axisymmetric extension problem

Asymptotic expansion homogenization of discrete fine-scale models with rotational degrees of freedom for the simulation of quasi-brittle materials

Three-dimensional elastic properties of open-cell porous structures: Analytic and finite element modelling

Macroscopic model with anisotropy based on micro-macro informations

New micromechanical model in time domain for linear viscoelastic composites with ellipsoidal reinforcements

An anisotropic elastoplastic Cosserat continuum model for shear failure in stratified geomaterials

AN ELASTOPLASTIC CONSTITUTIVE MODEL FOR POROUS MATERIALS

A hyperelastic constitutive model for soft elastomers considering the entanglement-dependent finite extensibility

Data-driven micromorphic mechanics for materials with strain localization

A three-dimensional computational multiscale micromorphic analysis of porous materials in linear elasticity