Abstract:Introduction: The Loess Plateau has long been plagued by cascading loess landslides. The rapid identification of these landslides, along with the accurate determination of their failure modes, is essential for conducting precise disaster assessments in the region. Such assessments are critical for minimizing both human casualties and economic losses. However, the lack of reliable reference data for the early identification of landslide failure modes has resulted in limited detection accuracy, complicating the differentiation between various failure modes. Therefore, investigating the deformation and failure characteristics of loess landslides under different failure modes is crucial for providing a scientific foundation for early hazard detection and the accurate assessment of risk profiles. Methods: This work examines the pre-slip deformation and post-slip damage characteristics of the rotational-sliding Huzhu Landslide and the translational-sliding Zhongzhai Landslide through a combination of field investigations, unmanned aerial vehicle surveys, and remote sensing interpretation. Physical model tests were conducted to simulate the instability and failure processes of both rotational and translational loess landslides. Meanwhile, three-dimensional models and orthophoto graphic images at various stages of the landslides were generated using Contexcapture. Results: The initial stages of rotational sliding landslides are marked by the formation of distinct tensile cracks at the trailing edge of the slope and minor uplift at the front. As the uplift at the front progresses and numerous extension fissures develop, the stability of the landslide reduces progressively. Upon reaching instability, the sliding velocity of the sliding mass initially accelerates before decelerating, with majority of the mass remaining on the sliding surface and retaining relatively well structural integrity. At the trailing edge of the landslide, characteristic features such as falling scarps, fractured walls, and sunken grooves can be observed, while the front displays significant bulging phenomena. In contrast, translational sliding landslides are initially characterized by minor tensile cracks at the trailing edge and pronounced deformation at the front. As these tensile cracks propagate, the landslide are prone to sudden instability under external triggering factors. Following the onset of instability, the sliding mass undergoes rapid movement, with only a small part of the mass remaining on the sliding surface. Discussion: Landslides triggered by different factors and occurring under varying water content conditions may exhibit significant differences in their pre-failure behavior and post-failure characteristics. Thus, it is imperative to conduct further research in this field to better understand these complex dynamics.

Physical modeling on failure mechanism of locked-segment landslides triggered by heavy precipitation

Experimental Study on the Evolution Mechanism of Landslide with Retaining Wall Locked Segment

MECHANISM ANALYSIS OF LANDSLIDE INDUCED BY ACCUMULATION LOADING OF HIGHWAY

Experimental study on tilting deformation and a new method for landslide prediction with retaining-wall locked segment

Research on failure mechanism of landslide with retaining-wall-like locked segment and instability prediction by inverse velocity method

Experimental Study on Deformation and Failure Characteristics of Interbedded Anti-inclined Rock Slopes Induced by Rainfall

Modelling rainfall-induced landslides from initiation of instability to post-failure

Rainfall-triggered waste dump instability analysis based on surface 3D deformation in physical model test

Research on the deformation and failure mode of rock slope with multiple locking segment failure characteristics

Experimental Study on the Failure Mechanism of the Zhoujiashan Landslide under the Combined Effect of Rainfall and Earthquake in Tianshui City, Northwest China

Physical Model Experiments on Failure Mechanism on Slopes of Weathered Basalt Soils during Heavy Rainfall Events

Physical model test of the deformation mechanism of the multi-sliding zones landslide subjected to the operated reservoir

Experimental study on the failure mechanisms of non-cohesive soil landslide dams with different scales

An integrated investigation of the failure mechanism of loess landslide induced by raining: from field to laboratory

Geological Analysis and Model Test of Bedding Rock Cutting Landslide

Physical modelling of sliding failure of concrete gravity dam under overloading condition

Early identification on failure mode of loess landslide: insight from case study and physical model experiment

Study on mechanism of retrogressive slope failure using artificial rainfall

A physical model test on a seepage-initiation-braking-type (SIBT) landslide under the coupling of rainfall and water level fluctuation

Insights into the deformation and failure characteristic of a slope due to excavation through multi-field monitoring: a model test

Modeling of rainfall-induced landslides using a full-scale flume test