Abstract:Gamma titanium-aluminum (γ-TiAl) intermetallic compounds are increasingly used in manufacturing key hot-end components (e.g., blade tenon) in aero engines due to their high specific strength and lightweight properties. Creep feed profile grinding (CFPG) as a crucial precision process that is applied to produce the final profile of the blade tenon. However, sudden surface burns and microcracks of machined γ-TiAl blade tenon often occur because of its low plasticity and high strength during grinding processes, leading to poor surface integrity. In this work, CFPG experiments based on the profile characteristics of γ-TiAl blade tenon were performed and an associated undeformed chip thickness model considering grain–workpiece contact condition was established to explore the evolution of the surface integrity. Subsequently, the surface integrity was analyzed at different positions of the blade tenon in terms of surface roughness and morphology, metallographic structure, microhardness, and residual stress. Results show that the profile characteristics of blade tenon have a significant influence on machined surface integrity because of the thermomechanical effect at various detecting positions. The residual stress was established based on the undeformed chip thickness model considering the profile structure, with a prediction error of 10%–15%. The thermomechanical effect is more obvious at the bottom area, where the surface roughness, work hardening degree, and subsurface plastic deformation range are the largest, while the values at the bevel area are the smallest. Based on the undeformed chip thickness model, a residual stress finite element simulation was conducted by employing thermomechanical coupled effects. In addition, the error between the simulation and the experiment was between 10%–15%. Strain and strain rate equations were established through the relationship between material displacement and depth. The average strain and strain rate of the ground surface when a p is 1.0 mm are 18.8% and 33.2% larger than when a p is 0.5 mm, respectively. This study deepens the understanding of surface integrity under the influence of CFPG γ-TiAl and provides a practical reference and theoretical basis for realizing high-quality profile grinding of other complex parts.

Grinding force and surface quality in creep feed profile grinding of turbine blade root of nickel-based superalloy with microcrystalline alumina abrasive wheels

Creep-feed grinding of single crystal nickel-base turbine blade fir-tree roots: tool wear, grinding force, temperature, and surface integrity

Profile grinding of DZ125 nickel-based superalloy: Grinding heat, temperature field, and surface quality

Creep feed grinding induced gradient microstructures in the superficial layer of turbine blade root of single crystal nickel-based superalloy

Studies on the Surface Quality of the Unsteady-State Grinding Technique

Alumina abrasive wheel wear in ultrasonic vibration-assisted creep-feed grinding of Inconel 718 nickel-based superalloy

Effect of creep feed grinding on surface integrity and fatigue life of Ni3Al based superalloy IC10

Comparative investigation on wear behavior of brown alumina and microcrystalline alumina abrasive wheels during creep feed grinding of different nickel-based superalloys

Study on thermal damage formation mechanisms and surface integrity in creep-feed profile grinding of superalloys

Investigation of grindability and surface integrity in creep feed grinding of GH738 alloy using different grinding wheels

Grinding surface and subsurface stress load of nickel-based single crystal superalloy DD5

Influence of Electroplated CBN Wheel Wear on Grinding Surface Morphology of Powder Metallurgy Superalloy FGH96

Surface integrity evolution during creep feed profile grinding of γ-TiAl blade tenon

Evolution of undeformed chip thickness and grinding forces in grinding of K4002 nickel-based superalloy using corundum abrasive wheels

Tool Wear Mechanism and Grinding Performance for Different Cooling-Lubrication Modes in Grinding of Nickel-Based Superalloys

Indentation behavior of creep-feed grinding induced gradient microstructures in single crystal nickel-based superalloy

On the residual stresses of turbine blade root of γ-TiAl intermetallic alloys induced by non-steady-state creep feed profile grinding

Grinding of fir tree slots of powder metallurgy superalloy FGH96 using profiled electroplated CBN wheel

Plastic deformation mechanism of grinding subsurface of nickel-based single-crystal superalloy

Study on the removal mechanism in multi-abrasive micro-grinding of nickel-based superalloy

Analytical and experimental study on micro-grinding surface-generated mechanism of DD5 single-crystal superalloy using micro-diamond pencil grinding tool