Abstract:Several effective methods to precisely evaluate the comfort of hygroscopic cooling fabrics transitioning from a wet to dry state were previously lacking. This study employed the heated plate method to mimic bare skin. We integrated a refitted YG606 II Thermal Resistance Tester with a heating control unit to simulate the human body's thermoregulation following light activity at a basal metabolic rate. This apparatus recorded the heating curves of hygroscopic cooling fabrics in their wet state to monitor temperature variations during drying. We introduced five objective evaluation parameters ( Area , FWHM , K 1 , K 2 , WCI ) based on the temperature differences between the heated plate and wetted fabric samples to differentiate levels of wet comfort among various fabrics. Twelve types of hygroscopic cooling fabrics, varying in material, structure, and hygroscopic properties, were selected from the market to assess the reliability of these parameters. The findings confirmed that these parameters effectively discern variations in wet comfort across the fabric samples. The parameters for cooling capacity (Area ) and cooling rate (K 1 , K 2 ) are critical in evaluating the role of liquid water in fabric on wet comfort, while cooling duration assesses the impact of the fabric's drying process on human comfort. Furthermore, the wet comfort index ( WCI ) correlated significantly with perceptions of dampness and coldness; a higher WCI value indicated a sharp, transient discomfort due to dampness and coldness, whereas a lower value suggested a mild, sustained sensation of wetness and coldness. The preference for these contrasting sensations varies by context. This research could facilitate the development of predictive models for wet comfort by evaluating the cooling capacity and wet comfort index of textiles in their wet state, thereby aiding fabric researchers and manufacturers in enhancing the thermal–wet comfort of hygroscopic cooling fabrics.

Transient heat loss analysis of fabrics using a dynamic sweating guarded hot plate protocol

Designing Textile Architectures for High Energy-Efficiency Human Body Sweat- and Cooling-Management

Latent Heat Loss Through Fabrics During an Alternate Simulated Work–Rest Sequence

Janus Membrane with Oriented Fiber Structure for Boosted Personal Wet-Thermal Management

Comparison between the human physiological sweat and pre-wetting method on the heat and mass transfer of thermal protective clothing under radiant exposure

Evaluation Method for the Wet Comfort of Hygroscopic Cooling Fabrics

The Exothermic Effects of Textile Fibers during Changes in Environmental Humidity: A Comparison between ISO:16533 and Dynamic Hot Plate Test Method

Heat and moisture transfer in fabric consisting of fibers with low hygroscopicity

Personal thermoregulation by moisture‐engineered materials

Wear trial assessment of layer structure effects on vapor permeability and condensation in a cold weather clothing ensemble

Sweat Gland-Like Fabric for Personal Thermal-Wet Comfort Management

Integrated Cooling (i-Cool) Textile of Heat Conduction and Sweat Transportation for Personal Perspiration Management

Impact of Fabric Moisture Transport Properties on Physiological Responses when Wearing Protective Clothing

Thermal Performance of Prototype Cooling Vest with Moisture Evaporation Function and Its Effects on Physiological Responses

Design and Coupled Moisture–Thermal Transfer Simulation of Opposite Cross-Section Polyethylene Terephthalate Knitted Fabric with Hygroscopic Quick-Drying Capability

A Biomimetic Transpiration Textile for Highly Efficient Personal Drying and Cooling

Experimental study of moisture role and heat transfer in thermal insulation fabric against hot surface contact

Heat and Sweat Transport Through Clothing Assemblies with Phase Changes, Condensation/evaporation and Absorption

A Patterned Knitted Fabric with Reversible Gating Stability for Dynamic Moisture Management of Human Body