Abstract:Purpose This study aims to investigate the mechanical, thermal, melt-flow and morphological behavior of acrylonitrile-butadiene-styrene (ABS)-based composites after bentonite inclusions. Melt mixing is the most preferred production method in industrial scale and basically it has very near processing parameters compared to 3D printing applications. Rheological parameters of ABS and its composites are important for 3D applications. Melt flow behavior of ABS effects the fabrication of 3D printed product at desired levels. Shear thinning and non-Newtonian viscosity characteristics of ABS make viscosity control easier and more flexible for several processing techniques including injection molding, compression molding and 3D printing. Design/methodology/approach ABS copolymer was reinforced with bentonite mineral (BNT) at four different loading ratios of 5%, 10%, 15% and 20%. ABS/BNT composites were fabricated by lab-scale micro-compounder followed by injection molding process. Mechanical, thermo-mechanical, thermal, melt-flow and morphological properties of composites were investigated by tensile, hardness and impact tests, dynamic mechanical analysis (DMA), thermo-gravimetric analysis (TGA), melt flow index (MFI) test and scanning electron microscopy (SEM), respectively. Findings Mechanical tests revealed that tensile strength, elongation and hardness of ABS were enhanced as BNT content increased. Glass transition temperature and storage modulus of ABS exhibited increasing trend with the additions of BNT. However, impact strength values dropped down with BNT inclusion. According to MFI test measurements, BNT incorporation displayed no significant change for MFI value of ABS. Homogeneous dispersion of BNT particles into ABS phase was deduced from SEM micrographs of composites. Loading ratio of 15% BNT was remarked as the most suitable candidate among fabricated ABS-based composites according to findings. Research limitations/implications The advanced mechanical properties and easy processing characteristics are the reasons for usage of ABS as an engineering plastic. Owing to the increase in its usage for 3D printing technology, the ABS became popular in recent years. The utilization of ABS in this technology is in filament form with various colors and dimensions. This is because of its proper rheological features. Practical implications Melt-mixing technique was used as preparation of composites, as this processing method is widely applied in industry. This method is also providing similar processing methodology with 3D printing technology. Originality/value According to the literature survey, to the best of the authors’ knowledge, this study is the first research work regarding the melt-flow performance of ABS-based composites to evaluate their 3D printing applications and processability. ABS and BNT containing composites were characterized by tensile, impact and shore hardness tests, DMA, TGA), MFI test and SEM techniques.

The effect of dispersion quality of fillers on soundproofing properties of acrylonitrile butadiene styrene/dense filler composites: Barite vs Magnetite

Enhanced Sound Insulation and Mechanical Properties Based on Inorganic Fillers/thermoplastic Elastomer Composites

Preparation and Properties of Damping Materials in Multi-Phase System

Electrophysical Characteristics of Acrylonitrile Butadiene Styrene Composites Filled with Magnetite and Carbon Fiber Fillers

Sound-Absorbing Polymer Composite Materials for Construction Purposes

Study on the Surface Properties of Colored Talc Filler (CTF) and Mechanical Performance of CTF/acrylonitrile-butadiene-styrene Composite

Morphological Structure, Rheological Behavior, Mechanical Properties and Sound Insulation Performance of Thermoplastic Rubber Composites Reinforced by Different Inorganic Fillers

Tailoring the Thermal and Mechanical Properties of Lightweight Cement-Based Composites by Macro and Micro Fillers

The Influence of Diatomite on the Sound Absorption Ability of Composites

Enhanced electrodynamic properties acrylonitrile butadiene styrene composites containing short-chopped recycled carbon fibers and magnetite

Thermal conductivity and dielectric properties of immiscible LDPE/epoxy blend filled with hybrid filler consisting of HGM and nitride particle

Effect of different fillers on thermal conductivity, tribological properties of Polyamide 6

Effect of Nanoparticles on the Mechanical Properties of Acrylonitrile–butadiene–styrene Specimens Fabricated by Fused Deposition Modeling

Physico - Mechanical characterization property evaluation of polyvinyl butyral composites filled with macadamia nutshell

Damping and acoustic properties of nanosilica filled poly(styrene-acrylate) interpenetrating polymer networks (IPNs): Effect of nanocomposite preparation method

On the Structural, Thermal, Micromechanical and Tribological Characterizations of Cu-Filled Acrylonitrile Butadiene Styrene Micro-Composites

Effect of iron‐containing fillers on heat release kinetics and strength properties of polyester resin

The effect of filler permittivity on the dielectric properties of polymer-based composites

Analysis of Acoustic Absorption Coefficients and Characterization of Epoxy Adhesive Compositions Based on the Reaction Product of Bisphenol A with Epichlorohydrin Modified with Fillers

Mechanical, thermal, melt-flow and morphological characterizations of bentonite-filled ABS copolymer

Effect of incorporation natural fillers with Sterculia foetida fiber on physical, mechanical, and thermal characterization of epoxy polymer composites