Abstract:Recent advancements in solid electrolyte research have revived interest in the concept of silicon anodes for All-Solid-State Batteries (aSSBs). Tan et al. have recently proposed stable cyclic performance of micro-grain size pure silicon anodes paired with sulfide-based solid electrolytes [1]. This development has opened pathways toward potential aSSBs without encountering dendrite growth issues. This rediscovery of the thin-film a-silicon anodes concept has sparked computational interest in simulating the fracture-chemo-mechanical silicon lithiation mechanism. Understanding chemical reactions during lithiation and crack evolution during de-lithiation processes are intriguing topics. Especially, elastic-plastic deformation coupled with phase-field continuous fracture is crucial in comprehending the underlying physics and enhancing performance of battery cell through reverse engineering approaches. In this work, we develop a thermodynamically consistent deformation-diffusion-damage coupled framework to model the evolution of dense, thin-film-like a-silicon anodes during lithiation and delithiation. During delithiation, tensile stress develops inside the film as the lithiated film overcomes the initial stack pressure and compressive stress prevalent during lithiation. As tensile stress and strain evolve, randomly distributed weak spots lead to crack nucleation. This fracture occurs throughout the silicon film, forming sharp vertical cracks, and depending on surface conditions along the solid-state electrolyte, some interfacial cracks may emerge, leading to permanent contact loss and resulting in capacity reduction. From the model, we observed “mud crack” like phenomena, where crack distribution is not controlled by particle’s property, but entire cluster’s thickness matters. While flat model suggests that one that nucleate the crack was weak spots where they make stress concentration over entire body, whether they can evolve into big vertical crack mostly governed by connectivity of such weak spot maps. However, from our interface roughness model, what governs the crack evolution most was not the randomly distributed weak spot, but its geometric relative thickness difference between one another. Due to manufacturing process, perfect interface is hard to be achieved and such geometric irregularity always exist, thus, additive and binder studies along the silicon anode and its interface between sse would be key to achieve long and stable life span for a-silicon based aSSBs. Reference [1] Tan, Darren HS, et al. "Carbon-free high-loading silicon anodes enabled by sulfide solid electrolytes." Science 373.6562 (2021): 1494-1499.

Gaussian Process Based Crack Initiation Modeling for Design of Battery Anode Materials

A Gaussian Process-Based Crack Pattern Modeling Approach for Battery Anode Materials Design

Sandwich-Lithiation and Longitudinal Crack in Amorphous Silicon Coated on Carbon Nanofibers

Phase Field Damage Framework for Modeling Thin-Film Silicon Anodes in All-Solid-State Batteries

Modeling of contact stress among compound particles in high energy lithium-ion battery

Large-scale Fabrication, 3D Tomography, and Lithium-Ion Battery Application of Porous Silicon.

Unlocking multiphysics design guidelines on Si/C composite nanostructures for high-energy-density and robust lithium-ion battery anode

Multiphysics coupled computational model for commercialized Si/graphite composite anode

Electro-chemo-mechanical behavior of lithium-ion battery electrodes

Silicon Nanowires as Anodes for Lithium‐Ion Batteries: Full Cell Modeling

Silicon Nanowires as Anodes for Lithium-Ion Batteries: Full Cell Modeling

Modeling and Simulation of Chemo-Elasto-Plastically Coupled Battery Active Particles

A numerical study of mechanical degradation of Carbon-Coated Graphite Active Particles in Li-ion battery anodes

Multiscale Modeling of Electro-Chemo-Mechanical Degradation in Si/C Core–Shell Anode for the Lithium-Ion Battery of High Energy Density

Modeling of Coupling Between Free Volume Evolution and Diffusion in Silicon Electrodes of Lithium-Ion Batteries

Design of Silicon-Based Porous Electrode in Lithium-Ion Batteries: Insights from Multiscale Electrode Model Simulations

Cohesive Modeling of Crack Nucleation under Diffusion Induced Stresses in a Thin Strip: Implications on the Critical Size for Flaw Tolerant Battery Electrodes

Uncertainty Quantification Analysis on Mechanical Properties of the Structured Silicon Anode via Surrogate Models

Microscopic Model for Fracture of Crystalline Si Nanopillars During Lithiation

Vulnerable Window of Yield Strength for Swelling-Driven Fracture of Phase-Transforming Battery Materials

Modeling Silicon-Dominant Anodes: Parametrization, Discussion, and Validation of a Newman-Type Model