Abstract:This study presents the development of a novel composite adsorbent, Lizardite-Rice Husk Composite (LRHC), synthesized from lizardite, a mineral derived from chromite ore waste, and rice husk, an agricultural byproduct. The primary objective was to evaluate the efficiency of LRHC in the adsorption of cationic dyes, Malachite Green (MG) and Methylene Blue (MB), from aqueous solutions. Systematic investigations were conducted to assess the influence of adsorbent mass, initial dye concentration, stirring speed, and contact time on adsorption performance. The results revealed that LRHC exhibited optimal adsorption capacities at pH values above 5, with MB and MG adsorption capacities reaching 309.75 mg/g and 51.43 mg/g, respectively. Adsorption equilibrium for MB was achieved within 30 min, indicating rapid dye uptake. Isotherm analysis demonstrated that the Temkin model best described MB adsorption, while the Freundlich model was more suitable for MG, with favorable Langmuir constants. Kinetic studies confirmed that the adsorption followed a second-order model, suggesting chemisorption as the rate-determining step. Intraparticle diffusion and mass transfer were identified as significant contributors to the adsorption process. Thermodynamic studies indicated that MB adsorption was spontaneous (ΔG° = −4.69 kJ/mol for the concentration of 50 mg/L at 298 K) and that MG adsorption was non-spontaneous (ΔG° = 1.52 kJ/mol for the concentration of 50 mg/L at 298 K), with spontaneity increasing at higher initial concentrations. Statistical physics modeling, particularly the monolayer model, provided detailed insights into the adsorption mechanisms and geometry. Furthermore, LRHC demonstrated excellent reusability, maintaining over 80% of its initial adsorption capacity after four regeneration cycles via a heterogeneous Fenton-like reaction. The combination of easy availability, cost-effectiveness, and environmental friendliness makes LRHC a superior adsorbent for the removal of cationic dyes compared to conventional alternatives. This research contributes novel insights into the design and application of composite adsorbents, offering a sustainable solution for water treatment and addressing significant environmental challenges.

Lanthanum (III) incorporated chitosan-montmorillonite composite as flexible material for adsorptive removal of azo dyes from water

Preparation and Superstrong Adsorption of a Novel La(III)-Crosslinked Alginate/Modified Diatomite Macroparticle Composite for Anionic Dyes Removal from Aqueous Solutions

Mesoporous Crosslinked Chitosan-Activated Clinoptilolite Biocomposite for the Removal of Anionic and Cationic Dyes.

Ion-imprinted aminoguanidine-chitosan for selective recognition of lanthanum (III) from wastewater

Highly Selective Adsorption of Dyes and Arsenate from Their Aqueous Mixtures Using a Silica-Sand/cationized-starch Composite

Removal of Methylene Blue from Aqueous Solution Using Chitosan-G-poly(acrylic Acid)/montmorillonite Superadsorbent Nanocomposite

Adsorption of Reactive Dyes Onto Chitosan/montmorillonite Intercalated Composite: Multi-Response Optimization, Kinetic, Isotherm and Thermodynamic Study.

Cetyltrimethylammonium Bromide-Modified Laponite@Diatomite Composites for Enhanced Adsorption Performance of Organic Pollutants

Facile Synthesis of an Organic–Inorganic Nanohybrid Composite of Salicylaldehyde-Based Chitosan Schiff Base/SiO2 for Acid Red 88 Dye Removal: Characterization and Adsorption Modeling

Removal of Various Cationic Dyes from Aqueous Solutions Using a Kind of Fully Biodegradable Magnetic Composite Microsphere

Efficient Adsorption of Both Methyl Orange and Chromium from Their Aqueous Mixtures Using a Quaternary Ammonium Salt Modified Chitosan Magnetic Composite Adsorbent.

Lanthanum-doped chitosan-based polyacrylamide double network hydrogels for adsorption of phosphorus from wastewater

Chitosan-Terephthalic Acid-Magnetic Composite Beads for Effective Removal of the Acid Blue Dye from Aqueous Solutions: Kinetics, Isotherm, and Statistical Modeling

Cationic dye remediation in water treatment with Lizardite–Rice Husk composite: A statistical physics approach

Tailored ultra-tough, antimicrobial and recyclable hydrogels based on chitosan and ionic liquid modified montmorillonite with different chain lengths for efficient adsorption of organic dyes in wastewater

Adsorption of La<sup>3+</sup>, Ce<sup>3+</sup> from Aqueous Solutions by Bayberry Tannin Grafted Chitosan

Efficient Removal of Arsenate from Water by Lanthanum Immobilized Electrospun Chitosan Nanofiber

Fabrication of sodium alginate-doped carbon dot composite hydrogel and its application for La (III) adsorption and enhanced the removal of phosphorus

Removal of Congo Red Dye from Aqueous Solution with Hydroxyapatite/chitosan Composite

Lignosulfonate-based Ternary Nanocomposite Hydrogels for Efficient Textile Dye Absorption

Chitosan-Silica Hybrid Composites for Removal of Sulfonated Azo Dyes from Aqueous Solutions